提交 5ff8e1f3 编写于 作者: Q Quentin Schulz 提交者: David S. Miller

net: phy: mscc: read 'vsc8531, led-%d-mode' as an u32

In the DT binding, it is specified nowhere that 'vsc8531,led-%d-mode' is
an u8, even though it's read as an u8 in the driver.

Let's update the driver to take into consideration that the
'vsc8531,led-%d-mode' property is of the default type u32.
Signed-off-by: NQuentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 36c53cf0
......@@ -122,7 +122,7 @@ enum rgmii_rx_clock_delay {
struct vsc8531_private {
int rate_magic;
u16 supp_led_modes;
u8 leds_mode[MAX_LEDS];
u32 leds_mode[MAX_LEDS];
u8 nleds;
};
......@@ -414,19 +414,19 @@ static int vsc85xx_edge_rate_magic_get(struct phy_device *phydev)
static int vsc85xx_dt_led_mode_get(struct phy_device *phydev,
char *led,
u8 default_mode)
u32 default_mode)
{
struct vsc8531_private *priv = phydev->priv;
struct device *dev = &phydev->mdio.dev;
struct device_node *of_node = dev->of_node;
u8 led_mode;
u32 led_mode;
int err;
if (!of_node)
return -ENODEV;
led_mode = default_mode;
err = of_property_read_u8(of_node, led, &led_mode);
err = of_property_read_u32(of_node, led, &led_mode);
if (!err && !(BIT(led_mode) & priv->supp_led_modes)) {
phydev_err(phydev, "DT %s invalid\n", led);
return -EINVAL;
......@@ -449,7 +449,8 @@ static int vsc85xx_dt_led_mode_get(struct phy_device *phydev,
}
#endif /* CONFIG_OF_MDIO */
static int vsc85xx_dt_led_modes_get(struct phy_device *phydev, u8 *default_mode)
static int vsc85xx_dt_led_modes_get(struct phy_device *phydev,
u32 *default_mode)
{
struct vsc8531_private *priv = phydev->priv;
char led_dt_prop[19];
......@@ -656,7 +657,7 @@ static int vsc85xx_probe(struct phy_device *phydev)
{
struct vsc8531_private *vsc8531;
int rate_magic;
u8 default_mode[2] = {VSC8531_LINK_1000_ACTIVITY,
u32 default_mode[2] = {VSC8531_LINK_1000_ACTIVITY,
VSC8531_LINK_100_ACTIVITY};
rate_magic = vsc85xx_edge_rate_magic_get(phydev);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册