提交 5f6c32d7 编写于 作者: J John Garry 提交者: Martin K. Petersen

scsi: hisi_sas: Drop SMP resp frame DMA mapping

The SMP frame response is written to the command table and not the SMP
response pointer from libsas, so don't bother DMA mapping (and unmapping)
the SMP response from libsas.
Suggested-by: NXiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: NJohn Garry <john.garry@huawei.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>
上级 1c003146
......@@ -300,7 +300,7 @@ static void hisi_sas_task_prep_abort(struct hisi_hba *hisi_hba,
static void hisi_sas_dma_unmap(struct hisi_hba *hisi_hba,
struct sas_task *task, int n_elem,
int n_elem_req, int n_elem_resp)
int n_elem_req)
{
struct device *dev = hisi_hba->dev;
......@@ -314,16 +314,13 @@ static void hisi_sas_dma_unmap(struct hisi_hba *hisi_hba,
if (n_elem_req)
dma_unmap_sg(dev, &task->smp_task.smp_req,
1, DMA_TO_DEVICE);
if (n_elem_resp)
dma_unmap_sg(dev, &task->smp_task.smp_resp,
1, DMA_FROM_DEVICE);
}
}
}
static int hisi_sas_dma_map(struct hisi_hba *hisi_hba,
struct sas_task *task, int *n_elem,
int *n_elem_req, int *n_elem_resp)
int *n_elem_req)
{
struct device *dev = hisi_hba->dev;
int rc;
......@@ -331,7 +328,7 @@ static int hisi_sas_dma_map(struct hisi_hba *hisi_hba,
if (sas_protocol_ata(task->task_proto)) {
*n_elem = task->num_scatter;
} else {
unsigned int req_len, resp_len;
unsigned int req_len;
if (task->num_scatter) {
*n_elem = dma_map_sg(dev, task->scatter,
......@@ -352,17 +349,6 @@ static int hisi_sas_dma_map(struct hisi_hba *hisi_hba,
rc = -EINVAL;
goto err_out_dma_unmap;
}
*n_elem_resp = dma_map_sg(dev, &task->smp_task.smp_resp,
1, DMA_FROM_DEVICE);
if (!*n_elem_resp) {
rc = -ENOMEM;
goto err_out_dma_unmap;
}
resp_len = sg_dma_len(&task->smp_task.smp_resp);
if (resp_len & 0x3) {
rc = -EINVAL;
goto err_out_dma_unmap;
}
}
}
......@@ -377,7 +363,7 @@ static int hisi_sas_dma_map(struct hisi_hba *hisi_hba,
err_out_dma_unmap:
/* It would be better to call dma_unmap_sg() here, but it's messy */
hisi_sas_dma_unmap(hisi_hba, task, *n_elem,
*n_elem_req, *n_elem_resp);
*n_elem_req);
prep_out:
return rc;
}
......@@ -449,7 +435,7 @@ static int hisi_sas_task_prep(struct sas_task *task,
struct asd_sas_port *sas_port = device->port;
struct device *dev = hisi_hba->dev;
int dlvry_queue_slot, dlvry_queue, rc, slot_idx;
int n_elem = 0, n_elem_dif = 0, n_elem_req = 0, n_elem_resp = 0;
int n_elem = 0, n_elem_dif = 0, n_elem_req = 0;
struct hisi_sas_dq *dq;
unsigned long flags;
int wr_q_index;
......@@ -485,7 +471,7 @@ static int hisi_sas_task_prep(struct sas_task *task,
}
rc = hisi_sas_dma_map(hisi_hba, task, &n_elem,
&n_elem_req, &n_elem_resp);
&n_elem_req);
if (rc < 0)
goto prep_out;
......@@ -580,7 +566,7 @@ static int hisi_sas_task_prep(struct sas_task *task,
hisi_sas_dif_dma_unmap(hisi_hba, task, n_elem_dif);
err_out_dma_unmap:
hisi_sas_dma_unmap(hisi_hba, task, n_elem,
n_elem_req, n_elem_resp);
n_elem_req);
prep_out:
dev_err(dev, "task prep: failed[%d]!\n", rc);
return rc;
......
......@@ -1280,14 +1280,12 @@ static int slot_complete_v1_hw(struct hisi_hba *hisi_hba,
ts->stat = SAM_STAT_GOOD;
dma_unmap_sg(dev, &task->smp_task.smp_resp, 1,
DMA_FROM_DEVICE);
dma_unmap_sg(dev, &task->smp_task.smp_req, 1,
DMA_TO_DEVICE);
memcpy(to + sg_resp->offset,
hisi_sas_status_buf_addr_mem(slot) +
sizeof(struct hisi_sas_err_record),
sg_dma_len(sg_resp));
sg_resp->length);
break;
}
case SAS_PROTOCOL_SATA:
......
......@@ -2423,14 +2423,12 @@ slot_complete_v2_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot)
ts->stat = SAM_STAT_GOOD;
dma_unmap_sg(dev, &task->smp_task.smp_resp, 1,
DMA_FROM_DEVICE);
dma_unmap_sg(dev, &task->smp_task.smp_req, 1,
DMA_TO_DEVICE);
memcpy(to + sg_resp->offset,
hisi_sas_status_buf_addr_mem(slot) +
sizeof(struct hisi_sas_err_record),
sg_dma_len(sg_resp));
sg_resp->length);
break;
}
case SAS_PROTOCOL_SATA:
......
......@@ -2215,14 +2215,12 @@ slot_complete_v3_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot)
ts->stat = SAM_STAT_GOOD;
dma_unmap_sg(dev, &task->smp_task.smp_resp, 1,
DMA_FROM_DEVICE);
dma_unmap_sg(dev, &task->smp_task.smp_req, 1,
DMA_TO_DEVICE);
memcpy(to + sg_resp->offset,
hisi_sas_status_buf_addr_mem(slot) +
sizeof(struct hisi_sas_err_record),
sg_dma_len(sg_resp));
sg_resp->length);
break;
}
case SAS_PROTOCOL_SATA:
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册