Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 5f540fb4 编写于 作者: B Brian Masney 提交者： Linus Walleij
浏览文件
操作

ARM: dts: qcom: pm8941: add interrupt controller properties 

Add interrupt controller properties now that spmi-gpio is a proper
hierarchical IRQ chip. The interrupts property is no longer needed so
remove it. Code was tested on the LG Nexus 5 (hammerhead) phone.
Signed-off-by: NBrian Masney <masneyb@onstation.org>
Reviewed-by: NStephen Boyd <sboyd@kernel.org>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
上级 ca69e2d1
隐藏空白更改
内联 并排
Showing with 2 addition and 36 deletion
arch/arm/boot/dts/qcom-pm8941.dtsi
浏览文件 @ 5f540fb4
......@@ -64,42 +64,8 @@
reg = <0xc000>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
<0 0xc1 0 IRQ_TYPE_NONE>,
<0 0xc2 0 IRQ_TYPE_NONE>,
<0 0xc3 0 IRQ_TYPE_NONE>,
<0 0xc4 0 IRQ_TYPE_NONE>,
<0 0xc5 0 IRQ_TYPE_NONE>,
<0 0xc6 0 IRQ_TYPE_NONE>,
<0 0xc7 0 IRQ_TYPE_NONE>,
<0 0xc8 0 IRQ_TYPE_NONE>,
<0 0xc9 0 IRQ_TYPE_NONE>,
<0 0xca 0 IRQ_TYPE_NONE>,
<0 0xcb 0 IRQ_TYPE_NONE>,
<0 0xcc 0 IRQ_TYPE_NONE>,
<0 0xcd 0 IRQ_TYPE_NONE>,
<0 0xce 0 IRQ_TYPE_NONE>,
<0 0xcf 0 IRQ_TYPE_NONE>,
<0 0xd0 0 IRQ_TYPE_NONE>,
<0 0xd1 0 IRQ_TYPE_NONE>,
<0 0xd2 0 IRQ_TYPE_NONE>,
<0 0xd3 0 IRQ_TYPE_NONE>,
<0 0xd4 0 IRQ_TYPE_NONE>,
<0 0xd5 0 IRQ_TYPE_NONE>,
<0 0xd6 0 IRQ_TYPE_NONE>,
<0 0xd7 0 IRQ_TYPE_NONE>,
<0 0xd8 0 IRQ_TYPE_NONE>,
<0 0xd9 0 IRQ_TYPE_NONE>,
<0 0xda 0 IRQ_TYPE_NONE>,
<0 0xdb 0 IRQ_TYPE_NONE>,
<0 0xdc 0 IRQ_TYPE_NONE>,
<0 0xdd 0 IRQ_TYPE_NONE>,
<0 0xde 0 IRQ_TYPE_NONE>,
<0 0xdf 0 IRQ_TYPE_NONE>,
<0 0xe0 0 IRQ_TYPE_NONE>,
<0 0xe1 0 IRQ_TYPE_NONE>,
<0 0xe2 0 IRQ_TYPE_NONE>,
<0 0xe3 0 IRQ_TYPE_NONE>;
interrupt-controller;
#interrupt-cells = <2>;
boost_bypass_n_pin: boost-bypass {
pins = "gpio21";
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或