ARM: S5PC1xx: add platform helpers for i2c adapter devices

Samsung S5PC100 has I2C bus controller compatible with the one known from
previous SoCs series. Add required platform setup and support code that
it can be used with s3c2410-i2c driver.
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

arch/arm/mach-s5pc100/cpu.c

@@ -75,6 +75,10 @@ void __init s5pc100_map_io(void)
 	iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
 
 	/* initialise device information early */
+
+	/* the i2c devices are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+	s3c_i2c1_setname("s3c2440-i2c");
 }
 
 void __init s5pc100_init_clocks(int xtal)

arch/arm/plat-s5pc1xx/Kconfig

@@ -42,7 +42,7 @@ config S5PC1XX_SETUP_FB_24BPP
 	help
           Common setup code for S5PC1XX with an 24bpp RGB display helper.
 
-config S5PC100_SETUP_I2C0
+config S5PC1XX_SETUP_I2C0
 	bool
 	default y
 	help
@@ -51,7 +51,7 @@ config S5PC100_SETUP_I2C0
 	  Note, currently since i2c0 is always compiled, this setup helper
 	  is always compiled with it.
 
-config S5PC100_SETUP_I2C1
+config S5PC1XX_SETUP_I2C1
 	bool
 	help
 	  Common setup code for i2c bus 1.

arch/arm/plat-s5pc1xx/Makefile

@@ -26,5 +26,5 @@ obj-$(CONFIG_CPU_S5PC100_CLOCK)	+= s5pc100-clock.o
 
 obj-$(CONFIG_S5P_GPIO_CFG_S5PC1XX) += gpio-config.o
 obj-$(CONFIG_S5PC1XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
-obj-$(CONFIG_S5PC100_SETUP_I2C0) += setup-i2c0.o
-obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S5PC1XX_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S5PC1XX_SETUP_I2C1) += setup-i2c1.o

arch/arm/plat-s5pc1xx/setup-i2c0.c

@@ -17,9 +17,14 @@
 
 struct platform_device; /* don't need the contents */
 
+#include <linux/gpio.h>
 #include <plat/iic.h>
+#include <plat/gpio-cfg.h>
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
 {
-	/* Pin configuration would be needed */
+	s3c_gpio_cfgpin(S5PC100_GPD(3), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPD(3), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPD(4), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPD(4), S3C_GPIO_PULL_UP);
 }

arch/arm/plat-s5pc1xx/setup-i2c1.c

@@ -17,9 +17,14 @@
 
 struct platform_device; /* don't need the contents */
 
+#include <linux/gpio.h>
 #include <plat/iic.h>
+#include <plat/gpio-cfg.h>
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev)
 {
-	/* Pin configuration would be needed */
+	s3c_gpio_cfgpin(S5PC100_GPD(5), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPD(5), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPD(6), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPD(6), S3C_GPIO_PULL_UP);
 }