firmware/qcom_scm: Add scm call to handle smmu errata

Qcom's smmu-500 needs to toggle wait-for-safe sequence to
handle TLB invalidation sync's.
Few firmwares allow doing that through SCM interface.
Add API to toggle wait for safe from firmware through a
SCM call.
Signed-off-by: NVivek Gautam <vivek.gautam@codeaurora.org>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: NStephen Boyd <swboyd@chromium.org>
Acked-by: NAndy Gross <agross@kernel.org>
Signed-off-by: NSai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: NWill Deacon <will@kernel.org>

drivers/firmware/qcom_scm-32.c

@@ -614,3 +614,8 @@ int __qcom_scm_io_writel(struct device *dev, phys_addr_t addr, unsigned int val)
 	return qcom_scm_call_atomic2(QCOM_SCM_SVC_IO, QCOM_SCM_IO_WRITE,
 				     addr, val);
 }
+
+int __qcom_scm_qsmmu500_wait_safe_toggle(struct device *dev, bool enable)
+{
+	return -ENODEV;
+}

drivers/firmware/qcom_scm-64.c

@@ -552,3 +552,16 @@ int __qcom_scm_io_writel(struct device *dev, phys_addr_t addr, unsigned int val)
 	return qcom_scm_call(dev, QCOM_SCM_SVC_IO, QCOM_SCM_IO_WRITE,
 			     &desc, &res);
 }
+
+int __qcom_scm_qsmmu500_wait_safe_toggle(struct device *dev, bool en)
+{
+	struct qcom_scm_desc desc = {0};
+	struct arm_smccc_res res;
+
+	desc.args[0] = QCOM_SCM_CONFIG_ERRATA1_CLIENT_ALL;
+	desc.args[1] = en;
+	desc.arginfo = QCOM_SCM_ARGS(2);
+
+	return qcom_scm_call_atomic(dev, QCOM_SCM_SVC_SMMU_PROGRAM,
+				    QCOM_SCM_CONFIG_ERRATA1, &desc, &res);
+}

drivers/firmware/qcom_scm.c

@@ -345,6 +345,12 @@ int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare)
 }
 EXPORT_SYMBOL(qcom_scm_iommu_secure_ptbl_init);
 
+int qcom_scm_qsmmu500_wait_safe_toggle(bool en)
+{
+	return __qcom_scm_qsmmu500_wait_safe_toggle(__scm->dev, en);
+}
+EXPORT_SYMBOL(qcom_scm_qsmmu500_wait_safe_toggle);
+
 int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val)
 {
 	return __qcom_scm_io_readl(__scm->dev, addr, val);

drivers/firmware/qcom_scm.h

@@ -91,10 +91,15 @@ extern int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
 				      u32 spare);
 #define QCOM_SCM_IOMMU_SECURE_PTBL_SIZE	3
 #define QCOM_SCM_IOMMU_SECURE_PTBL_INIT	4
+#define QCOM_SCM_SVC_SMMU_PROGRAM	0x15
+#define QCOM_SCM_CONFIG_ERRATA1		0x3
+#define QCOM_SCM_CONFIG_ERRATA1_CLIENT_ALL	0x2
 extern int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
 					     size_t *size);
 extern int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr,
 					     u32 size, u32 spare);
+extern int __qcom_scm_qsmmu500_wait_safe_toggle(struct device *dev,
+						bool enable);
 #define QCOM_MEM_PROT_ASSIGN_ID	0x16
 extern int  __qcom_scm_assign_mem(struct device *dev,
 				  phys_addr_t mem_region, size_t mem_sz,

include/linux/qcom_scm.h

@@ -58,6 +58,7 @@ extern int qcom_scm_set_remote_state(u32 state, u32 id);
 extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);
 extern int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size);
 extern int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare);
+extern int qcom_scm_qsmmu500_wait_safe_toggle(bool en);
 extern int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val);
 extern int qcom_scm_io_writel(phys_addr_t addr, unsigned int val);
 #else
@@ -97,6 +98,7 @@ qcom_scm_set_remote_state(u32 state,u32 id) { return -ENODEV; }
 static inline int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare) { return -ENODEV; }
 static inline int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size) { return -ENODEV; }
 static inline int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare) { return -ENODEV; }
+static inline int qcom_scm_qsmmu500_wait_safe_toggle(bool en) { return -ENODEV; }
 static inline int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val) { return -ENODEV; }
 static inline int qcom_scm_io_writel(phys_addr_t addr, unsigned int val) { return -ENODEV; }
 #endif