提交 5e0fac63 编写于 作者: D Ding Tianhong 提交者: Jeff Kirsher

net: ixgbe: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flag

The ixgbe driver use the compile check to determine if it can
send TLPs to Root Port with the Relaxed Ordering Attribute set,
this is too inconvenient, now the new flag PCI_DEV_FLAGS_NO_RELAXED_ORDERING
has been added to the kernel and we could check the bit4 in the PCIe
Device Control register to determine whether we should use the Relaxed
Ordering Attributes or not, so use this new way in the ixgbe driver.
Signed-off-by: NDing Tianhong <dingtianhong@huawei.com>
Acked-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
上级 f4986d25
......@@ -175,31 +175,9 @@ static s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw)
**/
static s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
{
#ifndef CONFIG_SPARC
u32 regval;
u32 i;
#endif
s32 ret_val;
ret_val = ixgbe_start_hw_generic(hw);
#ifndef CONFIG_SPARC
/* Disable relaxed ordering */
for (i = 0; ((i < hw->mac.max_tx_queues) &&
(i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i));
regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval);
}
for (i = 0; ((i < hw->mac.max_rx_queues) &&
(i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN |
IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
}
#endif
if (ret_val)
return ret_val;
......
......@@ -366,25 +366,6 @@ s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw)
}
IXGBE_WRITE_FLUSH(hw);
#ifndef CONFIG_SPARC
/* Disable relaxed ordering */
for (i = 0; i < hw->mac.max_tx_queues; i++) {
u32 regval;
regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i));
regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval);
}
for (i = 0; i < hw->mac.max_rx_queues; i++) {
u32 regval;
regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN |
IXGBE_DCA_RXCTRL_HEAD_WRO_EN);
IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
}
#endif
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册