mtd: gpmi: remove unneccessary header

The whole gpmi-nand driver has turned to pure devicetree supported.
So the linux/mtd/gpmi-nand.h is not neccessary now. Just remove it,
and move some macros to the gpmi-nand driver itself.
Signed-off-by: NHuang Shijie <shijie8@gmail.com>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

drivers/mtd/nand/gpmi-nand/gpmi-lib.c

@@ -18,7 +18,6 @@
  * with this program; if not, write to the Free Software Foundation, Inc.,
  * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
  */
-#include <linux/mtd/gpmi-nand.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
 

drivers/mtd/nand/gpmi-nand/gpmi-nand.c

@@ -25,7 +25,6 @@
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
-#include <linux/mtd/gpmi-nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/of.h>
@@ -33,6 +32,12 @@
 #include <linux/of_mtd.h>
 #include "gpmi-nand.h"
 
+/* Resource names for the GPMI NAND driver. */
+#define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME  "gpmi-nand"
+#define GPMI_NAND_BCH_REGS_ADDR_RES_NAME   "bch"
+#define GPMI_NAND_BCH_INTERRUPT_RES_NAME   "bch"
+#define GPMI_NAND_DMA_INTERRUPT_RES_NAME   "gpmi-dma"
+
 /* add our owner bbt descriptor */
 static uint8_t scan_ff_pattern[] = { 0xff };
 static struct nand_bbt_descr gpmi_bbt_descr = {

drivers/mtd/nand/gpmi-nand/gpmi-nand.h

@@ -130,7 +130,6 @@ struct gpmi_nand_data {
 	/* System Interface */
 	struct device		*dev;
 	struct platform_device	*pdev;
-	struct gpmi_nand_platform_data	*pdata;
 
 	/* Resources */
 	struct resources	resources;

include/linux/mtd/gpmi-nand.h

-/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_MXS_GPMI_NAND_H__
-#define __MACH_MXS_GPMI_NAND_H__
-
-/* The size of the resources is fixed. */
-#define GPMI_NAND_RES_SIZE	6
-
-/* Resource names for the GPMI NAND driver. */
-#define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME  "gpmi-nand"
-#define GPMI_NAND_GPMI_INTERRUPT_RES_NAME  "GPMI NAND GPMI Interrupt"
-#define GPMI_NAND_BCH_REGS_ADDR_RES_NAME   "bch"
-#define GPMI_NAND_BCH_INTERRUPT_RES_NAME   "bch"
-#define GPMI_NAND_DMA_CHANNELS_RES_NAME    "GPMI NAND DMA Channels"
-#define GPMI_NAND_DMA_INTERRUPT_RES_NAME   "gpmi-dma"
-
-/**
- * struct gpmi_nand_platform_data - GPMI NAND driver platform data.
- *
- * This structure communicates platform-specific information to the GPMI NAND
- * driver that can't be expressed as resources.
- *
- * @platform_init:           A pointer to a function the driver will call to
- *                           initialize the platform (e.g., set up the pin mux).
- * @min_prop_delay_in_ns:    Minimum propagation delay of GPMI signals to and
- *                           from the NAND Flash device, in nanoseconds.
- * @max_prop_delay_in_ns:    Maximum propagation delay of GPMI signals to and
- *                           from the NAND Flash device, in nanoseconds.
- * @max_chip_count:          The maximum number of chips for which the driver
- *                           should configure the hardware. This value most
- *                           likely reflects the number of pins that are
- *                           connected to a NAND Flash device. If this is
- *                           greater than the SoC hardware can support, the
- *                           driver will print a message and fail to initialize.
- * @partitions:              An optional pointer to an array of partition
- *                           descriptions.
- * @partition_count:         The number of elements in the partitions array.
- */
-struct gpmi_nand_platform_data {
-	/* SoC hardware information. */
-	int		(*platform_init)(void);
-
-	/* NAND Flash information. */
-	unsigned int	min_prop_delay_in_ns;
-	unsigned int	max_prop_delay_in_ns;
-	unsigned int	max_chip_count;
-
-	/* Medium information. */
-	struct		mtd_partition *partitions;
-	unsigned	partition_count;
-};
-#endif