提交 5dc47fef 编写于 作者: V Varadarajan Narayanan 提交者: Mark Brown

spi: qup: allow block mode to generate multiple transactions

This let's you write more to the SPI bus than 64K-1 which is important
if the block size of a SPI device is >= 64K or some other device wants
to do something larger.

This has the benefit of completely removing spi_message from the spi-qup
transactions
Signed-off-by: NMatthew McClintock <mmcclint@codeaurora.org>
Signed-off-by: NVaradarajan Narayanan <varada@codeaurora.org>
Signed-off-by: NMark Brown <broonie@kernel.org>
上级 3b5ea2c9
......@@ -120,7 +120,7 @@
#define SPI_NUM_CHIPSELECTS 4
#define SPI_MAX_DMA_XFER (SZ_64K - 64)
#define SPI_MAX_XFER (SZ_64K - 64)
/* high speed mode is when bus rate is greater then 26MHz */
#define SPI_HS_MIN_RATE 26000000
......@@ -149,6 +149,8 @@ struct spi_qup {
int n_words;
int tx_bytes;
int rx_bytes;
const u8 *tx_buf;
u8 *rx_buf;
int qup_v1;
int mode;
......@@ -173,6 +175,12 @@ static inline bool spi_qup_is_dma_xfer(int mode)
return false;
}
/* get's the transaction size length */
static inline unsigned int spi_qup_len(struct spi_qup *controller)
{
return controller->n_words * controller->w_size;
}
static inline bool spi_qup_is_valid_state(struct spi_qup *controller)
{
u32 opstate = readl_relaxed(controller->base + QUP_STATE);
......@@ -225,10 +233,9 @@ static int spi_qup_set_state(struct spi_qup *controller, u32 state)
return 0;
}
static void spi_qup_read_from_fifo(struct spi_qup *controller,
struct spi_transfer *xfer, u32 num_words)
static void spi_qup_read_from_fifo(struct spi_qup *controller, u32 num_words)
{
u8 *rx_buf = xfer->rx_buf;
u8 *rx_buf = controller->rx_buf;
int i, shift, num_bytes;
u32 word;
......@@ -236,8 +243,9 @@ static void spi_qup_read_from_fifo(struct spi_qup *controller,
word = readl_relaxed(controller->base + QUP_INPUT_FIFO);
num_bytes = min_t(int, xfer->len - controller->rx_bytes,
controller->w_size);
num_bytes = min_t(int, spi_qup_len(controller) -
controller->rx_bytes,
controller->w_size);
if (!rx_buf) {
controller->rx_bytes += num_bytes;
......@@ -258,13 +266,12 @@ static void spi_qup_read_from_fifo(struct spi_qup *controller,
}
}
static void spi_qup_read(struct spi_qup *controller,
struct spi_transfer *xfer)
static void spi_qup_read(struct spi_qup *controller)
{
u32 remainder, words_per_block, num_words;
bool is_block_mode = controller->mode == QUP_IO_M_MODE_BLOCK;
remainder = DIV_ROUND_UP(xfer->len - controller->rx_bytes,
remainder = DIV_ROUND_UP(spi_qup_len(controller) - controller->rx_bytes,
controller->w_size);
words_per_block = controller->in_blk_sz >> 2;
......@@ -285,7 +292,7 @@ static void spi_qup_read(struct spi_qup *controller,
}
/* read up to the maximum transfer size available */
spi_qup_read_from_fifo(controller, xfer, num_words);
spi_qup_read_from_fifo(controller, num_words);
remainder -= num_words;
......@@ -307,18 +314,18 @@ static void spi_qup_read(struct spi_qup *controller,
}
static void spi_qup_write_to_fifo(struct spi_qup *controller,
struct spi_transfer *xfer, u32 num_words)
static void spi_qup_write_to_fifo(struct spi_qup *controller, u32 num_words)
{
const u8 *tx_buf = xfer->tx_buf;
const u8 *tx_buf = controller->tx_buf;
int i, num_bytes;
u32 word, data;
for (; num_words; num_words--) {
word = 0;
num_bytes = min_t(int, xfer->len - controller->tx_bytes,
controller->w_size);
num_bytes = min_t(int, spi_qup_len(controller) -
controller->tx_bytes,
controller->w_size);
if (tx_buf)
for (i = 0; i < num_bytes; i++) {
data = tx_buf[controller->tx_bytes + i];
......@@ -338,13 +345,12 @@ static void spi_qup_dma_done(void *data)
complete(&qup->done);
}
static void spi_qup_write(struct spi_qup *controller,
struct spi_transfer *xfer)
static void spi_qup_write(struct spi_qup *controller)
{
bool is_block_mode = controller->mode == QUP_IO_M_MODE_BLOCK;
u32 remainder, words_per_block, num_words;
remainder = DIV_ROUND_UP(xfer->len - controller->tx_bytes,
remainder = DIV_ROUND_UP(spi_qup_len(controller) - controller->tx_bytes,
controller->w_size);
words_per_block = controller->out_blk_sz >> 2;
......@@ -364,7 +370,7 @@ static void spi_qup_write(struct spi_qup *controller,
num_words = 1;
}
spi_qup_write_to_fifo(controller, xfer, num_words);
spi_qup_write_to_fifo(controller, num_words);
remainder -= num_words;
......@@ -471,36 +477,62 @@ static int spi_qup_do_pio(struct spi_device *spi, struct spi_transfer *xfer,
{
struct spi_master *master = spi->master;
struct spi_qup *qup = spi_master_get_devdata(master);
int ret;
int ret, n_words, iterations, offset = 0;
ret = spi_qup_io_config(spi, xfer);
if (ret)
return ret;
n_words = qup->n_words;
iterations = n_words / SPI_MAX_XFER; /* round down */
qup->rx_buf = xfer->rx_buf;
qup->tx_buf = xfer->tx_buf;
ret = spi_qup_set_state(qup, QUP_STATE_RUN);
if (ret) {
dev_warn(qup->dev, "cannot set RUN state\n");
return ret;
}
do {
if (iterations)
qup->n_words = SPI_MAX_XFER;
else
qup->n_words = n_words % SPI_MAX_XFER;
ret = spi_qup_set_state(qup, QUP_STATE_PAUSE);
if (ret) {
dev_warn(qup->dev, "cannot set PAUSE state\n");
return ret;
}
if (qup->tx_buf && offset)
qup->tx_buf = xfer->tx_buf + offset * SPI_MAX_XFER;
if (qup->mode == QUP_IO_M_MODE_FIFO)
spi_qup_write(qup, xfer);
if (qup->rx_buf && offset)
qup->rx_buf = xfer->rx_buf + offset * SPI_MAX_XFER;
ret = spi_qup_set_state(qup, QUP_STATE_RUN);
if (ret) {
dev_warn(qup->dev, "%s(%d): cannot set RUN state\n",
__func__, __LINE__);
return ret;
}
/*
* if the transaction is small enough, we need
* to fallback to FIFO mode
*/
if (qup->n_words <= (qup->in_fifo_sz / sizeof(u32)))
qup->mode = QUP_IO_M_MODE_FIFO;
if (!wait_for_completion_timeout(&qup->done, timeout))
return -ETIMEDOUT;
ret = spi_qup_io_config(spi, xfer);
if (ret)
return ret;
ret = spi_qup_set_state(qup, QUP_STATE_RUN);
if (ret) {
dev_warn(qup->dev, "cannot set RUN state\n");
return ret;
}
ret = spi_qup_set_state(qup, QUP_STATE_PAUSE);
if (ret) {
dev_warn(qup->dev, "cannot set PAUSE state\n");
return ret;
}
if (qup->mode == QUP_IO_M_MODE_FIFO)
spi_qup_write(qup);
ret = spi_qup_set_state(qup, QUP_STATE_RUN);
if (ret) {
dev_warn(qup->dev, "cannot set RUN state\n");
return ret;
}
if (!wait_for_completion_timeout(&qup->done, timeout))
return -ETIMEDOUT;
offset++;
} while (iterations--);
return 0;
}
......@@ -508,7 +540,6 @@ static int spi_qup_do_pio(struct spi_device *spi, struct spi_transfer *xfer,
static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
{
struct spi_qup *controller = dev_id;
struct spi_transfer *xfer = controller->xfer;
u32 opflags, qup_err, spi_err;
int error = 0;
......@@ -545,10 +576,10 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
writel_relaxed(opflags, controller->base + QUP_OPERATIONAL);
} else {
if (opflags & QUP_OP_IN_SERVICE_FLAG)
spi_qup_read(controller, xfer);
spi_qup_read(controller);
if (opflags & QUP_OP_OUT_SERVICE_FLAG)
spi_qup_write(controller, xfer);
spi_qup_write(controller);
}
if ((opflags & QUP_OP_MAX_INPUT_DONE_FLAG) || error)
......@@ -755,7 +786,8 @@ static int spi_qup_transfer_one(struct spi_master *master,
return ret;
timeout = DIV_ROUND_UP(xfer->speed_hz, MSEC_PER_SEC);
timeout = DIV_ROUND_UP(xfer->len * 8, timeout);
timeout = DIV_ROUND_UP(min_t(unsigned long, SPI_MAX_XFER,
xfer->len) * 8, timeout);
timeout = 100 * msecs_to_jiffies(timeout);
reinit_completion(&controller->done);
......@@ -969,7 +1001,7 @@ static int spi_qup_probe(struct platform_device *pdev)
master->dev.of_node = pdev->dev.of_node;
master->auto_runtime_pm = true;
master->dma_alignment = dma_get_cache_alignment();
master->max_dma_len = SPI_MAX_DMA_XFER;
master->max_dma_len = SPI_MAX_XFER;
platform_set_drvdata(pdev, master);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册