hpt366: add debounce delay to cable_detect() method

Alan Cox reported that cable detection sometimes works unreliably
for HPT3xxN and that the issue is fixed by adding debounce delay
as used by the vendor drivers.

While at it, get rid of unneeded parens/space in the vicinity...
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/ide/hpt366.c

@@ -1173,8 +1173,9 @@ static u8 hpt3xx_cable_detect(ide_hwif_t *hwif)
 		u16 mcr;
 
 		pci_read_config_word(dev, mcr_addr, &mcr);
-		pci_write_config_word(dev, mcr_addr, (mcr | 0x8000));
-		/* now read cable id register */
+		pci_write_config_word(dev, mcr_addr, mcr | 0x8000);
+		/* Debounce, then read cable ID register */
+		udelay(10);
 		pci_read_config_byte(dev, 0x5a, &scr1);
 		pci_write_config_word(dev, mcr_addr, mcr);
 	} else if (chip_type >= HPT370) {
@@ -1185,10 +1186,11 @@ static u8 hpt3xx_cable_detect(ide_hwif_t *hwif)
 		u8 scr2 = 0;
 
 		pci_read_config_byte(dev, 0x5b, &scr2);
-		pci_write_config_byte(dev, 0x5b, (scr2 & ~1));
-		/* now read cable id register */
+		pci_write_config_byte(dev, 0x5b, scr2 & ~1);
+		/* Debounce, then read cable ID register */
+		udelay(10);
 		pci_read_config_byte(dev, 0x5a, &scr1);
-		pci_write_config_byte(dev, 0x5b,  scr2);
+		pci_write_config_byte(dev, 0x5b, scr2);
 	} else
 		pci_read_config_byte(dev, 0x5a, &scr1);