提交 5d2bd700 编写于 作者: S Suresh Siddha 提交者: H. Peter Anvin

x86, fpu: decouple non-lazy/eager fpu restore from xsave

Decouple non-lazy/eager fpu restore policy from the existence of the xsave
feature. Introduce a synthetic CPUID flag to represent the eagerfpu
policy. "eagerfpu=on" boot paramter will enable the policy.
Requested-by: NH. Peter Anvin <hpa@zytor.com>
Requested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/1347300665-6209-2-git-send-email-suresh.b.siddha@intel.comSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
上级 304bceda
......@@ -1833,6 +1833,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
and restore using xsave. The kernel will fallback to
enabling legacy floating-point and sse state.
eagerfpu= [X86]
on enable eager fpu restore
off disable eager fpu restore
nohlt [BUGS=ARM,SH] Tells the kernel that the sleep(SH) or
wfi(ARM) instruction doesn't work correctly and not to
use it. This is also useful when using JTAG debugger.
......
......@@ -97,6 +97,7 @@
#define X86_FEATURE_EXTD_APICID (3*32+26) /* has extended APICID (8 bits) */
#define X86_FEATURE_AMD_DCM (3*32+27) /* multi-node processor */
#define X86_FEATURE_APERFMPERF (3*32+28) /* APERFMPERF */
#define X86_FEATURE_EAGER_FPU (3*32+29) /* "eagerfpu" Non lazy FPU restore */
/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
#define X86_FEATURE_XMM3 (4*32+ 0) /* "pni" SSE-3 */
......@@ -305,6 +306,7 @@ extern const char * const x86_power_flags[32];
#define cpu_has_perfctr_core boot_cpu_has(X86_FEATURE_PERFCTR_CORE)
#define cpu_has_cx8 boot_cpu_has(X86_FEATURE_CX8)
#define cpu_has_cx16 boot_cpu_has(X86_FEATURE_CX16)
#define cpu_has_eager_fpu boot_cpu_has(X86_FEATURE_EAGER_FPU)
#if defined(CONFIG_X86_INVLPG) || defined(CONFIG_X86_64)
# define cpu_has_invlpg 1
......
......@@ -38,6 +38,7 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka,
extern unsigned int mxcsr_feature_mask;
extern void fpu_init(void);
extern void eager_fpu_init(void);
DECLARE_PER_CPU(struct task_struct *, fpu_owner_task);
......@@ -84,6 +85,11 @@ static inline int is_x32_frame(void)
#define X87_FSW_ES (1 << 7) /* Exception Summary */
static __always_inline __pure bool use_eager_fpu(void)
{
return static_cpu_has(X86_FEATURE_EAGER_FPU);
}
static __always_inline __pure bool use_xsaveopt(void)
{
return static_cpu_has(X86_FEATURE_XSAVEOPT);
......@@ -99,6 +105,14 @@ static __always_inline __pure bool use_fxsr(void)
return static_cpu_has(X86_FEATURE_FXSR);
}
static inline void fx_finit(struct i387_fxsave_struct *fx)
{
memset(fx, 0, xstate_size);
fx->cwd = 0x37f;
if (cpu_has_xmm)
fx->mxcsr = MXCSR_DEFAULT;
}
extern void __sanitize_i387_state(struct task_struct *);
static inline void sanitize_i387_state(struct task_struct *tsk)
......@@ -291,13 +305,13 @@ static inline void __thread_set_has_fpu(struct task_struct *tsk)
static inline void __thread_fpu_end(struct task_struct *tsk)
{
__thread_clear_has_fpu(tsk);
if (!use_xsave())
if (!use_eager_fpu())
stts();
}
static inline void __thread_fpu_begin(struct task_struct *tsk)
{
if (!use_xsave())
if (!use_eager_fpu())
clts();
__thread_set_has_fpu(tsk);
}
......@@ -327,10 +341,14 @@ static inline void drop_fpu(struct task_struct *tsk)
static inline void drop_init_fpu(struct task_struct *tsk)
{
if (!use_xsave())
if (!use_eager_fpu())
drop_fpu(tsk);
else
xrstor_state(init_xstate_buf, -1);
else {
if (use_xsave())
xrstor_state(init_xstate_buf, -1);
else
fxrstor_checking(&init_xstate_buf->i387);
}
}
/*
......@@ -370,7 +388,7 @@ static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct ta
* If the task has used the math, pre-load the FPU on xsave processors
* or if the past 5 consecutive context-switches used math.
*/
fpu.preload = tsk_used_math(new) && (use_xsave() ||
fpu.preload = tsk_used_math(new) && (use_eager_fpu() ||
new->fpu_counter > 5);
if (__thread_has_fpu(old)) {
if (!__save_init_fpu(old))
......@@ -383,14 +401,14 @@ static inline fpu_switch_t switch_fpu_prepare(struct task_struct *old, struct ta
new->fpu_counter++;
__thread_set_has_fpu(new);
prefetch(new->thread.fpu.state);
} else if (!use_xsave())
} else if (!use_eager_fpu())
stts();
} else {
old->fpu_counter = 0;
old->thread.fpu.last_cpu = ~0;
if (fpu.preload) {
new->fpu_counter++;
if (!use_xsave() && fpu_lazy_restore(new, cpu))
if (!use_eager_fpu() && fpu_lazy_restore(new, cpu))
fpu.preload = 0;
else
prefetch(new->thread.fpu.state);
......@@ -452,6 +470,14 @@ static inline void user_fpu_begin(void)
preempt_enable();
}
static inline void __save_fpu(struct task_struct *tsk)
{
if (use_xsave())
xsave_state(&tsk->thread.fpu.state->xsave, -1);
else
fpu_fxsave(&tsk->thread.fpu);
}
/*
* These disable preemption on their own and are safe
*/
......@@ -459,8 +485,8 @@ static inline void save_init_fpu(struct task_struct *tsk)
{
WARN_ON_ONCE(!__thread_has_fpu(tsk));
if (use_xsave()) {
xsave_state(&tsk->thread.fpu.state->xsave, -1);
if (use_eager_fpu()) {
__save_fpu(tsk);
return;
}
......@@ -526,11 +552,9 @@ static inline void fpu_free(struct fpu *fpu)
static inline void fpu_copy(struct task_struct *dst, struct task_struct *src)
{
if (use_xsave()) {
struct xsave_struct *xsave = &dst->thread.fpu.state->xsave;
memset(&xsave->xsave_hdr, 0, sizeof(struct xsave_hdr_struct));
xsave_state(xsave, -1);
if (use_eager_fpu()) {
memset(&dst->thread.fpu.state->xsave, 0, xstate_size);
__save_fpu(dst);
} else {
struct fpu *dfpu = &dst->thread.fpu;
struct fpu *sfpu = &src->thread.fpu;
......
......@@ -1297,7 +1297,6 @@ void __cpuinit cpu_init(void)
dbg_restore_debug_regs();
fpu_init();
xsave_init();
raw_local_save_flags(kernel_eflags);
......@@ -1352,6 +1351,5 @@ void __cpuinit cpu_init(void)
dbg_restore_debug_regs();
fpu_init();
xsave_init();
}
#endif
......@@ -22,9 +22,8 @@
/*
* Were we in an interrupt that interrupted kernel mode?
*
* For now, on xsave platforms we will return interrupted
* kernel FPU as not-idle. TBD: As we use non-lazy FPU restore
* for xsave platforms, ideally we can change the return value
* For now, with eagerfpu we will return interrupted kernel FPU
* state as not-idle. TBD: Ideally we can change the return value
* to something like __thread_has_fpu(current). But we need to
* be careful of doing __thread_clear_has_fpu() before saving
* the FPU etc for supporting nested uses etc. For now, take
......@@ -38,7 +37,7 @@
*/
static inline bool interrupted_kernel_fpu_idle(void)
{
if (use_xsave())
if (use_eager_fpu())
return 0;
return !__thread_has_fpu(current) &&
......@@ -84,7 +83,7 @@ void kernel_fpu_begin(void)
__save_init_fpu(me);
__thread_clear_has_fpu(me);
/* We do 'stts()' in kernel_fpu_end() */
} else if (!use_xsave()) {
} else if (!use_eager_fpu()) {
this_cpu_write(fpu_owner_task, NULL);
clts();
}
......@@ -93,7 +92,7 @@ EXPORT_SYMBOL(kernel_fpu_begin);
void kernel_fpu_end(void)
{
if (use_xsave())
if (use_eager_fpu())
math_state_restore();
else
stts();
......@@ -122,7 +121,6 @@ static void __cpuinit mxcsr_feature_mask_init(void)
{
unsigned long mask = 0;
clts();
if (cpu_has_fxsr) {
memset(&fx_scratch, 0, sizeof(struct i387_fxsave_struct));
asm volatile("fxsave %0" : : "m" (fx_scratch));
......@@ -131,7 +129,6 @@ static void __cpuinit mxcsr_feature_mask_init(void)
mask = 0x0000ffbf;
}
mxcsr_feature_mask &= mask;
stts();
}
static void __cpuinit init_thread_xstate(void)
......@@ -185,9 +182,8 @@ void __cpuinit fpu_init(void)
init_thread_xstate();
mxcsr_feature_mask_init();
/* clean state in init */
current_thread_info()->status = 0;
clear_used_math();
xsave_init();
eager_fpu_init();
}
void fpu_finit(struct fpu *fpu)
......@@ -198,12 +194,7 @@ void fpu_finit(struct fpu *fpu)
}
if (cpu_has_fxsr) {
struct i387_fxsave_struct *fx = &fpu->state->fxsave;
memset(fx, 0, xstate_size);
fx->cwd = 0x37f;
if (cpu_has_xmm)
fx->mxcsr = MXCSR_DEFAULT;
fx_finit(&fpu->state->fxsave);
} else {
struct i387_fsave_struct *fp = &fpu->state->fsave;
memset(fp, 0, xstate_size);
......
......@@ -156,7 +156,7 @@ void flush_thread(void)
* Free the FPU state for non xsave platforms. They get reallocated
* lazily at the first use.
*/
if (!use_xsave())
if (!use_eager_fpu())
free_thread_xstate(tsk);
}
......
......@@ -630,7 +630,7 @@ EXPORT_SYMBOL_GPL(math_state_restore);
dotraplinkage void __kprobes
do_device_not_available(struct pt_regs *regs, long error_code)
{
BUG_ON(use_xsave());
BUG_ON(use_eager_fpu());
#ifdef CONFIG_MATH_EMULATION
if (read_cr0() & X86_CR0_EM) {
......
......@@ -400,7 +400,7 @@ int __restore_xstate_sig(void __user *buf, void __user *buf_fx, int size)
set_used_math();
}
if (use_xsave())
if (use_eager_fpu())
math_state_restore();
return err;
......@@ -450,28 +450,10 @@ static void prepare_fx_sw_frame(void)
*/
static inline void xstate_enable(void)
{
clts();
set_in_cr4(X86_CR4_OSXSAVE);
xsetbv(XCR_XFEATURE_ENABLED_MASK, pcntxt_mask);
}
/*
* This is same as math_state_restore(). But use_xsave() is not yet
* patched to use math_state_restore().
*/
static inline void init_restore_xstate(void)
{
init_fpu(current);
__thread_fpu_begin(current);
xrstor_state(init_xstate_buf, -1);
}
static inline void xstate_enable_ap(void)
{
xstate_enable();
init_restore_xstate();
}
/*
* Record the offsets and sizes of different state managed by the xsave
* memory layout.
......@@ -500,17 +482,20 @@ static void __init setup_xstate_features(void)
/*
* setup the xstate image representing the init state
*/
static void __init setup_xstate_init(void)
static void __init setup_init_fpu_buf(void)
{
setup_xstate_features();
/*
* Setup init_xstate_buf to represent the init state of
* all the features managed by the xsave
*/
init_xstate_buf = alloc_bootmem_align(xstate_size,
__alignof__(struct xsave_struct));
init_xstate_buf->i387.mxcsr = MXCSR_DEFAULT;
fx_finit(&init_xstate_buf->i387);
if (!cpu_has_xsave)
return;
setup_xstate_features();
/*
* Init all the features state with header_bv being 0x0
......@@ -523,6 +508,17 @@ static void __init setup_xstate_init(void)
xsave_state(init_xstate_buf, -1);
}
static int disable_eagerfpu;
static int __init eager_fpu_setup(char *s)
{
if (!strcmp(s, "on"))
setup_force_cpu_cap(X86_FEATURE_EAGER_FPU);
else if (!strcmp(s, "off"))
disable_eagerfpu = 1;
return 1;
}
__setup("eagerfpu=", eager_fpu_setup);
/*
* Enable and initialize the xsave feature.
*/
......@@ -559,15 +555,10 @@ static void __init xstate_enable_boot_cpu(void)
update_regset_xstate_info(xstate_size, pcntxt_mask);
prepare_fx_sw_frame();
setup_xstate_init();
setup_init_fpu_buf();
pr_info("enabled xstate_bv 0x%llx, cntxt size 0x%x\n",
pcntxt_mask, xstate_size);
current->thread.fpu.state =
alloc_bootmem_align(xstate_size, __alignof__(struct xsave_struct));
init_restore_xstate();
}
/*
......@@ -586,6 +577,42 @@ void __cpuinit xsave_init(void)
return;
this_func = next_func;
next_func = xstate_enable_ap;
next_func = xstate_enable;
this_func();
}
static inline void __init eager_fpu_init_bp(void)
{
current->thread.fpu.state =
alloc_bootmem_align(xstate_size, __alignof__(struct xsave_struct));
if (!init_xstate_buf)
setup_init_fpu_buf();
}
void __cpuinit eager_fpu_init(void)
{
static __refdata void (*boot_func)(void) = eager_fpu_init_bp;
clear_used_math();
current_thread_info()->status = 0;
if (!cpu_has_eager_fpu) {
stts();
return;
}
if (boot_func) {
boot_func();
boot_func = NULL;
}
/*
* This is same as math_state_restore(). But use_xsave() is
* not yet patched to use math_state_restore().
*/
init_fpu(current);
__thread_fpu_begin(current);
if (cpu_has_xsave)
xrstor_state(init_xstate_buf, -1);
else
fxrstor_checking(&init_xstate_buf->i387);
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册