提交 5d1b79d2 编写于 作者: M Michal Simek 提交者: Arnd Bergmann

ARM64: Add new Xilinx ZynqMP SoC

Initial version of device tree for Xilinx ZynqMP SoC.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Acked-by: NSören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
上级 13a7a6ac
......@@ -228,6 +228,11 @@ config ARCH_XGENE
help
This enables support for AppliedMicro X-Gene SOC Family
config ARCH_ZYNQMP
bool "Xilinx ZynqMP Family"
help
This enables support for Xilinx ZynqMP Family
endmenu
menu "Bus support"
......
......@@ -5,5 +5,6 @@ dts-dirs += cavium
dts-dirs += exynos
dts-dirs += freescale
dts-dirs += mediatek
dts-dirs += xilinx
subdir-y := $(dts-dirs)
dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-ep108.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
clean-files := *.dtb
/*
* dts file for Xilinx ZynqMP ep108 development board
*
* (C) Copyright 2014 - 2015, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*/
/dts-v1/;
/include/ "zynqmp.dtsi"
/ {
model = "ZynqMP EP108";
aliases {
serial0 = &uart0;
};
chosen {
stdout-path = "serial0:115200n8";
};
memory {
device_type = "memory";
reg = <0x0 0x0 0x40000000>;
};
};
&gem0 {
status = "okay";
phy-handle = <&phy0>;
phy-mode = "rgmii-id";
phy0: phy@0{
reg = <0>;
max-speed = <100>;
};
};
&uart0 {
status = "okay";
};
/*
* dts file for Xilinx ZynqMP
*
* (C) Copyright 2014 - 2015, Xilinx, Inc.
*
* Michal Simek <michal.simek@xilinx.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*/
/ {
compatible = "xlnx,zynqmp";
#address-cells = <2>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
enable-method = "psci";
reg = <0x0>;
};
cpu@1 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
enable-method = "psci";
reg = <0x1>;
};
cpu@2 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
enable-method = "psci";
reg = <0x2>;
};
cpu@3 {
compatible = "arm,cortex-a53", "arm,armv8";
device_type = "cpu";
enable-method = "psci";
reg = <0x3>;
};
};
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <0 143 4>,
<0 144 4>,
<0 145 4>,
<0 146 4>;
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
timer {
compatible = "arm,armv8-timer";
interrupt-parent = <&gic>;
interrupts = <1 13 0xf01>,
<1 14 0xf01>,
<1 11 0xf01>,
<1 10 0xf01>;
};
amba_apu {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges;
gic: interrupt-controller@f9010000 {
compatible = "arm,gic-400", "arm,cortex-a15-gic";
#interrupt-cells = <3>;
reg = <0x0 0xf9010000 0x10000>,
<0x0 0xf902f000 0x2000>,
<0x0 0xf9040000 0x20000>,
<0x0 0xf906f000 0x2000>;
interrupt-controller;
interrupt-parent = <&gic>;
interrupts = <1 9 0xf04>;
};
};
amba {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges;
misc_clk: misc_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <25000000>;
};
ttc0: timer@ff110000 {
compatible = "cdns,ttc";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 36 4>, <0 37 4>, <0 38 4>;
reg = <0x0 0xff110000 0x1000>;
clocks = <&misc_clk>;
timer-width = <32>;
};
ttc1: timer@ff120000 {
compatible = "cdns,ttc";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 39 4>, <0 40 4>, <0 41 4>;
reg = <0x0 0xff120000 0x1000>;
clocks = <&misc_clk>;
timer-width = <32>;
};
ttc2: timer@ff130000 {
compatible = "cdns,ttc";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 42 4>, <0 43 4>, <0 44 4>;
reg = <0x0 0xff130000 0x1000>;
clocks = <&misc_clk>;
timer-width = <32>;
};
ttc3: timer@ff140000 {
compatible = "cdns,ttc";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 45 4>, <0 46 4>, <0 47 4>;
reg = <0x0 0xff140000 0x1000>;
clocks = <&misc_clk>;
timer-width = <32>;
};
uart0: serial@ff000000 {
compatible = "cdns,uart-r1p8";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 21 4>;
reg = <0x0 0xff000000 0x1000>;
clock-names = "uart_clk", "pclk";
clocks = <&misc_clk &misc_clk>;
};
uart1: serial@ff010000 {
compatible = "cdns,uart-r1p8";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 22 4>;
reg = <0x0 0xff010000 0x1000>;
clock-names = "uart_clk", "pclk";
clocks = <&misc_clk &misc_clk>;
};
gpio: gpio@ff0a0000 {
compatible = "xlnx,zynq-gpio-1.0";
status = "disabled";
#gpio-cells = <0x2>;
clocks = <&misc_clk>;
interrupt-parent = <&gic>;
interrupts = <0 16 4>;
reg = <0x0 0xff0a0000 0x1000>;
};
gem0: ethernet@ff0b0000 {
compatible = "cdns,gem";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 57 4>, <0 57 4>;
reg = <0x0 0xff0b0000 0x1000>;
clock-names = "pclk", "hclk", "tx_clk";
clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
#address-cells = <1>;
#size-cells = <0>;
};
gem1: ethernet@ff0c0000 {
compatible = "cdns,gem";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 59 4>, <0 59 4>;
reg = <0x0 0xff0c0000 0x1000>;
clock-names = "pclk", "hclk", "tx_clk";
clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
#address-cells = <1>;
#size-cells = <0>;
};
gem2: ethernet@ff0d0000 {
compatible = "cdns,gem";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 61 4>, <0 61 4>;
reg = <0x0 0xff0d0000 0x1000>;
clock-names = "pclk", "hclk", "tx_clk";
clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
#address-cells = <1>;
#size-cells = <0>;
};
gem3: ethernet@ff0e0000 {
compatible = "cdns,gem";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 63 4>, <0 63 4>;
reg = <0x0 0xff0e0000 0x1000>;
clock-names = "pclk", "hclk", "tx_clk";
clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
#address-cells = <1>;
#size-cells = <0>;
};
spi0: spi@ff040000 {
compatible = "cdns,spi-r1p6";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 19 4>;
reg = <0x0 0xff040000 0x1000>;
clock-names = "ref_clk", "pclk";
clocks = <&misc_clk &misc_clk>;
#address-cells = <1>;
#size-cells = <0>;
};
spi1: spi@ff050000 {
compatible = "cdns,spi-r1p6";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 20 4>;
reg = <0x0 0xff050000 0x1000>;
clock-names = "ref_clk", "pclk";
clocks = <&misc_clk &misc_clk>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c_clk: i2c_clk {
compatible = "fixed-clock";
#clock-cells = <0x0>;
clock-frequency = <111111111>;
};
i2c0: i2c@ff020000 {
compatible = "cdns,i2c-r1p10";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 17 4>;
reg = <0x0 0xff020000 0x1000>;
clocks = <&i2c_clk>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c1: i2c@ff030000 {
compatible = "cdns,i2c-r1p10";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 18 4>;
reg = <0x0 0xff030000 0x1000>;
clocks = <&i2c_clk>;
#address-cells = <1>;
#size-cells = <0>;
};
sdhci0: sdhci@ff160000 {
compatible = "arasan,sdhci-8.9a";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 48 4>;
reg = <0x0 0xff160000 0x1000>;
clock-names = "clk_xin", "clk_ahb";
clocks = <&misc_clk>, <&misc_clk>;
};
sdhci1: sdhci@ff170000 {
compatible = "arasan,sdhci-8.9a";
status = "disabled";
interrupt-parent = <&gic>;
interrupts = <0 49 4>;
reg = <0x0 0xff170000 0x1000>;
clock-names = "clk_xin", "clk_ahb";
clocks = <&misc_clk>, <&misc_clk>;
};
watchdog0: watchdog@fd4d0000 {
compatible = "cdns,wdt-r1p2";
status = "disabled";
clocks= <&misc_clk>;
interrupt-parent = <&gic>;
interrupts = <0 52 1>;
reg = <0x0 0xfd4d0000 0x1000>;
timeout-sec = <10>;
};
};
};
......@@ -36,6 +36,7 @@ CONFIG_ARCH_MEDIATEK=y
CONFIG_ARCH_THUNDER=y
CONFIG_ARCH_VEXPRESS=y
CONFIG_ARCH_XGENE=y
CONFIG_ARCH_ZYNQMP=y
CONFIG_PCI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_XGENE=y
......@@ -94,6 +95,8 @@ CONFIG_SERIAL_8250_MT6577=y
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_XILINX_PS_UART=y
CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_SPI=y
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册