Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 5c9decdf 编写于 作者: L Lorenzo Bianconi 提交者： Felix Fietkau
浏览文件
操作

mt76: add led support to mt76x0e driver 

Move mt76x02 led support in mt76x02-lib module in order to
add tpt led trigger to mt76x0e driver
Tested-by: NLGA1150 <dqfext@gmail.com>
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: NFelix Fietkau <nbd@nbd.name>
上级 31217429
隐藏空白更改
内联 并排
Showing with 82 addition and 77 deletion
drivers/net/wireless/mediatek/mt76/mt76x02_regs.h
浏览文件 @ 5c9decdf
......@@ -230,6 +230,29 @@
#define MT_COM_REG2 0x0738
#define MT_COM_REG3 0x073C
#define MT_LED_CTRL 0x0770
#define MT_LED_CTRL_REPLAY(_n) BIT(0 + (8 * (_n)))
#define MT_LED_CTRL_POLARITY(_n) BIT(1 + (8 * (_n)))
#define MT_LED_CTRL_TX_BLINK_MODE(_n) BIT(2 + (8 * (_n)))
#define MT_LED_CTRL_KICK(_n) BIT(7 + (8 * (_n)))
#define MT_LED_TX_BLINK_0 0x0774
#define MT_LED_TX_BLINK_1 0x0778
#define MT_LED_S0_BASE 0x077C
#define MT_LED_S0(_n) (MT_LED_S0_BASE + 8 * (_n))
#define MT_LED_S1_BASE 0x0780
#define MT_LED_S1(_n) (MT_LED_S1_BASE + 8 * (_n))
#define MT_LED_STATUS_OFF_MASK GENMASK(31, 24)
#define MT_LED_STATUS_OFF(_v) (((_v) << __ffs(MT_LED_STATUS_OFF_MASK)) & \
MT_LED_STATUS_OFF_MASK)
#define MT_LED_STATUS_ON_MASK GENMASK(23, 16)
#define MT_LED_STATUS_ON(_v) (((_v) << __ffs(MT_LED_STATUS_ON_MASK)) & \
MT_LED_STATUS_ON_MASK)
#define MT_LED_STATUS_DURATION_MASK GENMASK(15, 8)
#define MT_LED_STATUS_DURATION(_v) (((_v) << __ffs(MT_LED_STATUS_DURATION_MASK)) & \
MT_LED_STATUS_DURATION_MASK)
#define MT_FCE_PSE_CTRL 0x0800
#define MT_FCE_PARAMETERS 0x0804
#define MT_FCE_CSO 0x0808
......
drivers/net/wireless/mediatek/mt76/mt76x02_util.c
浏览文件 @ 5c9decdf
......@@ -75,6 +75,58 @@ static const struct ieee80211_iface_combination mt76x02_if_comb[] = {
}
};
static void
mt76x02_led_set_config(struct mt76_dev *mdev, u8 delay_on,
u8 delay_off)
{
struct mt76x02_dev *dev = container_of(mdev, struct mt76x02_dev,
mt76);
u32 val;
val = MT_LED_STATUS_DURATION(0xff) |
MT_LED_STATUS_OFF(delay_off) |
MT_LED_STATUS_ON(delay_on);
mt76_wr(dev, MT_LED_S0(mdev->led_pin), val);
mt76_wr(dev, MT_LED_S1(mdev->led_pin), val);
val = MT_LED_CTRL_REPLAY(mdev->led_pin) |
MT_LED_CTRL_KICK(mdev->led_pin);
if (mdev->led_al)
val |= MT_LED_CTRL_POLARITY(mdev->led_pin);
mt76_wr(dev, MT_LED_CTRL, val);
}
static int
mt76x02_led_set_blink(struct led_classdev *led_cdev,
unsigned long *delay_on,
unsigned long *delay_off)
{
struct mt76_dev *mdev = container_of(led_cdev, struct mt76_dev,
led_cdev);
u8 delta_on, delta_off;
delta_off = max_t(u8, *delay_off / 10, 1);
delta_on = max_t(u8, *delay_on / 10, 1);
mt76x02_led_set_config(mdev, delta_on, delta_off);
return 0;
}
static void
mt76x02_led_set_brightness(struct led_classdev *led_cdev,
enum led_brightness brightness)
{
struct mt76_dev *mdev = container_of(led_cdev, struct mt76_dev,
led_cdev);
if (!brightness)
mt76x02_led_set_config(mdev, 0, 0xff);
else
mt76x02_led_set_config(mdev, 0xff, 0);
}
void mt76x02_init_device(struct mt76x02_dev *dev)
{
struct ieee80211_hw *hw = mt76_hw(dev);
......@@ -109,6 +161,13 @@ void mt76x02_init_device(struct mt76x02_dev *dev)
BIT(NL80211_IFTYPE_ADHOC);
wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_VHT_IBSS);
/* init led callbacks */
if (IS_ENABLED(CONFIG_MT76_LEDS)) {
dev->mt76.led_cdev.brightness_set =
mt76x02_led_set_brightness;
dev->mt76.led_cdev.blink_set = mt76x02_led_set_blink;
}
}
hw->sta_data_size = sizeof(struct mt76x02_sta);
......
drivers/net/wireless/mediatek/mt76/mt76x2/mcu.h
浏览文件 @ 5c9decdf
......@@ -26,29 +26,6 @@
#define MT_MCU_PCIE_REMAP_BASE2 0x0744
#define MT_MCU_PCIE_REMAP_BASE3 0x0748
#define MT_LED_CTRL 0x0770
#define MT_LED_CTRL_REPLAY(_n) BIT(0 + (8 * (_n)))
#define MT_LED_CTRL_POLARITY(_n) BIT(1 + (8 * (_n)))
#define MT_LED_CTRL_TX_BLINK_MODE(_n) BIT(2 + (8 * (_n)))
#define MT_LED_CTRL_KICK(_n) BIT(7 + (8 * (_n)))
#define MT_LED_TX_BLINK_0 0x0774
#define MT_LED_TX_BLINK_1 0x0778
#define MT_LED_S0_BASE 0x077C
#define MT_LED_S0(_n) (MT_LED_S0_BASE + 8 * (_n))
#define MT_LED_S1_BASE 0x0780
#define MT_LED_S1(_n) (MT_LED_S1_BASE + 8 * (_n))
#define MT_LED_STATUS_OFF_MASK GENMASK(31, 24)
#define MT_LED_STATUS_OFF(_v) (((_v) << __ffs(MT_LED_STATUS_OFF_MASK)) & \
MT_LED_STATUS_OFF_MASK)
#define MT_LED_STATUS_ON_MASK GENMASK(23, 16)
#define MT_LED_STATUS_ON(_v) (((_v) << __ffs(MT_LED_STATUS_ON_MASK)) & \
MT_LED_STATUS_ON_MASK)
#define MT_LED_STATUS_DURATION_MASK GENMASK(15, 8)
#define MT_LED_STATUS_DURATION(_v) (((_v) << __ffs(MT_LED_STATUS_DURATION_MASK)) & \
MT_LED_STATUS_DURATION_MASK)
#define MT_MCU_ROM_PATCH_OFFSET 0x80000
#define MT_MCU_ROM_PATCH_ADDR 0x90000
......
drivers/net/wireless/mediatek/mt76/mt76x2/pci_init.c
浏览文件 @ 5c9decdf
......@@ -342,54 +342,6 @@ struct mt76x02_dev *mt76x2_alloc_device(struct device *pdev)
return dev;
}
static void mt76x2_led_set_config(struct mt76_dev *mt76, u8 delay_on,
u8 delay_off)
{
struct mt76x02_dev *dev = container_of(mt76, struct mt76x02_dev,
mt76);
u32 val;
val = MT_LED_STATUS_DURATION(0xff) |
MT_LED_STATUS_OFF(delay_off) |
MT_LED_STATUS_ON(delay_on);
mt76_wr(dev, MT_LED_S0(mt76->led_pin), val);
mt76_wr(dev, MT_LED_S1(mt76->led_pin), val);
val = MT_LED_CTRL_REPLAY(mt76->led_pin) |
MT_LED_CTRL_KICK(mt76->led_pin);
if (mt76->led_al)
val |= MT_LED_CTRL_POLARITY(mt76->led_pin);
mt76_wr(dev, MT_LED_CTRL, val);
}
static int mt76x2_led_set_blink(struct led_classdev *led_cdev,
unsigned long *delay_on,
unsigned long *delay_off)
{
struct mt76_dev *mt76 = container_of(led_cdev, struct mt76_dev,
led_cdev);
u8 delta_on, delta_off;
delta_off = max_t(u8, *delay_off / 10, 1);
delta_on = max_t(u8, *delay_on / 10, 1);
mt76x2_led_set_config(mt76, delta_on, delta_off);
return 0;
}
static void mt76x2_led_set_brightness(struct led_classdev *led_cdev,
enum led_brightness brightness)
{
struct mt76_dev *mt76 = container_of(led_cdev, struct mt76_dev,
led_cdev);
if (!brightness)
mt76x2_led_set_config(mt76, 0, 0xff);
else
mt76x2_led_set_config(mt76, 0xff, 0);
}
int mt76x2_register_device(struct mt76x02_dev *dev)
{
int ret;
......@@ -404,12 +356,6 @@ int mt76x2_register_device(struct mt76x02_dev *dev)
mt76x02_config_mac_addr_list(dev);
/* init led callbacks */
if (IS_ENABLED(CONFIG_MT76_LEDS)) {
dev->mt76.led_cdev.brightness_set = mt76x2_led_set_brightness;
dev->mt76.led_cdev.blink_set = mt76x2_led_set_blink;
}
ret = mt76_register_device(&dev->mt76, true, mt76x02_rates,
ARRAY_SIZE(mt76x02_rates));
if (ret)
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或