提交 5c751c93 编写于 作者: D David S. Miller

Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless

John W. Linville says:

====================
Regarding the iwlwifi bits, Johannes says:

"We revert an rfkill bugfix that unfortunately caused more bugs, shuffle
some code to avoid touching the PCIe device before it's enabled and
disconnect if firmware fails to do our bidding. I also have Stanislaw's
fix to not crash in some channel switch scenarios."

As for the mac80211 bits, Johannes says:

"This time, I have one fix from Dan Carpenter for users of
nl80211hdr_put(), and one fix from myself fixing a regression with the
libertas driver."

Along with the above...

Dan Carpenter fixes some incorrectly placed "address of" operators
in hostap that caused copying of junk data.

Jussi Kivilinna corrects zd1201 to use an allocated buffer rather
than the stack for a URB operation.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
......@@ -523,9 +523,9 @@ static int prism2_ioctl_giwaplist(struct net_device *dev,
data->length = prism2_ap_get_sta_qual(local, addr, qual, IW_MAX_AP, 1);
memcpy(extra, &addr, sizeof(struct sockaddr) * data->length);
memcpy(extra, addr, sizeof(struct sockaddr) * data->length);
data->flags = 1; /* has quality information */
memcpy(extra + sizeof(struct sockaddr) * data->length, &qual,
memcpy(extra + sizeof(struct sockaddr) * data->length, qual,
sizeof(struct iw_quality) * data->length);
kfree(addr);
......
......@@ -1068,7 +1068,10 @@ void iwl_chswitch_done(struct iwl_priv *priv, bool is_success)
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
if (test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
if (!test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &priv->status))
return;
if (ctx->vif)
ieee80211_chswitch_done(ctx->vif, is_success);
}
......
......@@ -97,8 +97,6 @@
#define APMG_PCIDEV_STT_VAL_L1_ACT_DIS (0x00000800)
#define APMG_RTC_INT_STT_RFKILL (0x10000000)
/* Device system time */
#define DEVICE_SYSTEM_TIME_REG 0xA0206C
......
......@@ -138,6 +138,20 @@ static void iwl_mvm_roc_finished(struct iwl_mvm *mvm)
schedule_work(&mvm->roc_done_wk);
}
static bool iwl_mvm_te_check_disconnect(struct iwl_mvm *mvm,
struct ieee80211_vif *vif,
const char *errmsg)
{
if (vif->type != NL80211_IFTYPE_STATION)
return false;
if (vif->bss_conf.assoc && vif->bss_conf.dtim_period)
return false;
if (errmsg)
IWL_ERR(mvm, "%s\n", errmsg);
ieee80211_connection_loss(vif);
return true;
}
/*
* Handles a FW notification for an event that is known to the driver.
*
......@@ -163,8 +177,13 @@ static void iwl_mvm_te_handle_notif(struct iwl_mvm *mvm,
* P2P Device discoveribility, while there are other higher priority
* events in the system).
*/
WARN_ONCE(!le32_to_cpu(notif->status),
"Failed to schedule time event\n");
if (WARN_ONCE(!le32_to_cpu(notif->status),
"Failed to schedule time event\n")) {
if (iwl_mvm_te_check_disconnect(mvm, te_data->vif, NULL)) {
iwl_mvm_te_clear_data(mvm, te_data);
return;
}
}
if (le32_to_cpu(notif->action) & TE_NOTIF_HOST_EVENT_END) {
IWL_DEBUG_TE(mvm,
......@@ -180,14 +199,8 @@ static void iwl_mvm_te_handle_notif(struct iwl_mvm *mvm,
* By now, we should have finished association
* and know the dtim period.
*/
if (te_data->vif->type == NL80211_IFTYPE_STATION &&
(!te_data->vif->bss_conf.assoc ||
!te_data->vif->bss_conf.dtim_period)) {
IWL_ERR(mvm,
"No assocation and the time event is over already...\n");
ieee80211_connection_loss(te_data->vif);
}
iwl_mvm_te_check_disconnect(mvm, te_data->vif,
"No assocation and the time event is over already...");
iwl_mvm_te_clear_data(mvm, te_data);
} else if (le32_to_cpu(notif->action) & TE_NOTIF_HOST_EVENT_START) {
te_data->running = true;
......
......@@ -888,14 +888,6 @@ irqreturn_t iwl_pcie_irq_handler(int irq, void *dev_id)
iwl_op_mode_hw_rf_kill(trans->op_mode, hw_rfkill);
if (hw_rfkill) {
/*
* Clear the interrupt in APMG if the NIC is going down.
* Note that when the NIC exits RFkill (else branch), we
* can't access prph and the NIC will be reset in
* start_hw anyway.
*/
iwl_write_prph(trans, APMG_RTC_INT_STT_REG,
APMG_RTC_INT_STT_RFKILL);
set_bit(STATUS_RFKILL, &trans_pcie->status);
if (test_and_clear_bit(STATUS_HCMD_ACTIVE,
&trans_pcie->status))
......
......@@ -1502,16 +1502,16 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev,
spin_lock_init(&trans_pcie->reg_lock);
init_waitqueue_head(&trans_pcie->ucode_write_waitq);
/* W/A - seems to solve weird behavior. We need to remove this if we
* don't want to stay in L1 all the time. This wastes a lot of power */
pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
PCIE_LINK_STATE_CLKPM);
if (pci_enable_device(pdev)) {
err = -ENODEV;
goto out_no_pci;
}
/* W/A - seems to solve weird behavior. We need to remove this if we
* don't want to stay in L1 all the time. This wastes a lot of power */
pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
PCIE_LINK_STATE_CLKPM);
pci_set_master(pdev);
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36));
......
......@@ -98,10 +98,12 @@ static int zd1201_fw_upload(struct usb_device *dev, int apfw)
goto exit;
err = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), 0x4,
USB_DIR_IN | 0x40, 0,0, &ret, sizeof(ret), ZD1201_FW_TIMEOUT);
USB_DIR_IN | 0x40, 0, 0, buf, sizeof(ret), ZD1201_FW_TIMEOUT);
if (err < 0)
goto exit;
memcpy(&ret, buf, sizeof(ret));
if (ret & 0x80) {
err = -EIO;
goto exit;
......
......@@ -2622,8 +2622,8 @@ static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info)
hdr = nl80211hdr_put(msg, info->snd_portid, info->snd_seq, 0,
NL80211_CMD_NEW_KEY);
if (IS_ERR(hdr))
return PTR_ERR(hdr);
if (!hdr)
return -ENOBUFS;
cookie.msg = msg;
cookie.idx = key_idx;
......@@ -6507,6 +6507,9 @@ static int nl80211_testmode_dump(struct sk_buff *skb,
NL80211_CMD_TESTMODE);
struct nlattr *tmdata;
if (!hdr)
break;
if (nla_put_u32(skb, NL80211_ATTR_WIPHY, phy_idx)) {
genlmsg_cancel(skb, hdr);
break;
......@@ -6951,9 +6954,8 @@ static int nl80211_remain_on_channel(struct sk_buff *skb,
hdr = nl80211hdr_put(msg, info->snd_portid, info->snd_seq, 0,
NL80211_CMD_REMAIN_ON_CHANNEL);
if (IS_ERR(hdr)) {
err = PTR_ERR(hdr);
if (!hdr) {
err = -ENOBUFS;
goto free_msg;
}
......@@ -7251,9 +7253,8 @@ static int nl80211_tx_mgmt(struct sk_buff *skb, struct genl_info *info)
hdr = nl80211hdr_put(msg, info->snd_portid, info->snd_seq, 0,
NL80211_CMD_FRAME);
if (IS_ERR(hdr)) {
err = PTR_ERR(hdr);
if (!hdr) {
err = -ENOBUFS;
goto free_msg;
}
}
......@@ -8132,9 +8133,8 @@ static int nl80211_probe_client(struct sk_buff *skb,
hdr = nl80211hdr_put(msg, info->snd_portid, info->snd_seq, 0,
NL80211_CMD_PROBE_CLIENT);
if (IS_ERR(hdr)) {
err = PTR_ERR(hdr);
if (!hdr) {
err = -ENOBUFS;
goto free_msg;
}
......
......@@ -976,21 +976,19 @@ int cfg80211_disconnect(struct cfg80211_registered_device *rdev,
struct net_device *dev, u16 reason, bool wextev)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
int err;
int err = 0;
ASSERT_WDEV_LOCK(wdev);
kfree(wdev->connect_keys);
wdev->connect_keys = NULL;
if (wdev->conn) {
if (wdev->conn)
err = cfg80211_sme_disconnect(wdev, reason);
} else if (!rdev->ops->disconnect) {
else if (!rdev->ops->disconnect)
cfg80211_mlme_down(rdev, dev);
err = 0;
} else {
else if (wdev->current_bss)
err = rdev_disconnect(rdev, dev, reason);
}
return err;
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册