net/mlx5e: Add support for reading connector type from PTYS

Read port connector type from the firmware instead of caching it in the
driver metadata.
Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c

@@ -809,8 +809,23 @@ static void get_advertising(u32 eth_proto_cap, u8 tx_pause,
 		ethtool_link_ksettings_add_link_mode(link_ksettings, advertising, Asym_Pause);
 }
 
-static u8 get_connector_port(u32 eth_proto)
+static int ptys2connector_type[MLX5E_CONNECTOR_TYPE_NUMBER] = {
+		[MLX5E_PORT_UNKNOWN]            = PORT_OTHER,
+		[MLX5E_PORT_NONE]               = PORT_NONE,
+		[MLX5E_PORT_TP]                 = PORT_TP,
+		[MLX5E_PORT_AUI]                = PORT_AUI,
+		[MLX5E_PORT_BNC]                = PORT_BNC,
+		[MLX5E_PORT_MII]                = PORT_MII,
+		[MLX5E_PORT_FIBRE]              = PORT_FIBRE,
+		[MLX5E_PORT_DA]                 = PORT_DA,
+		[MLX5E_PORT_OTHER]              = PORT_OTHER,
+	};
+
+static u8 get_connector_port(u32 eth_proto, u8 connector_type)
 {
+	if (connector_type && connector_type < MLX5E_CONNECTOR_TYPE_NUMBER)
+		return ptys2connector_type[connector_type];
+
 	if (eth_proto & (MLX5E_PROT_MASK(MLX5E_10GBASE_SR)
 			 | MLX5E_PROT_MASK(MLX5E_40GBASE_SR4)
 			 | MLX5E_PROT_MASK(MLX5E_100GBASE_SR4)
@@ -856,6 +871,7 @@ static int mlx5e_get_link_ksettings(struct net_device *netdev,
 	u32 eth_proto_oper;
 	u8 an_disable_admin;
 	u8 an_status;
+	u8 connector_type;
 	int err;
 
 	err = mlx5_query_port_ptys(mdev, out, sizeof(out), MLX5_PTYS_EN, 1);
@@ -871,6 +887,7 @@ static int mlx5e_get_link_ksettings(struct net_device *netdev,
 	eth_proto_lp     = MLX5_GET(ptys_reg, out, eth_proto_lp_advertise);
 	an_disable_admin = MLX5_GET(ptys_reg, out, an_disable_admin);
 	an_status        = MLX5_GET(ptys_reg, out, an_status);
+	connector_type   = MLX5_GET(ptys_reg, out, connector_type);
 
 	mlx5_query_port_pause(mdev, &rx_pause, &tx_pause);
 
@@ -883,7 +900,8 @@ static int mlx5e_get_link_ksettings(struct net_device *netdev,
 
 	eth_proto_oper = eth_proto_oper ? eth_proto_oper : eth_proto_cap;
 
-	link_ksettings->base.port = get_connector_port(eth_proto_oper);
+	link_ksettings->base.port = get_connector_port(eth_proto_oper,
+						       connector_type);
 	get_lp_advertising(eth_proto_lp, link_ksettings);
 
 	if (an_status == MLX5_AN_COMPLETE)

include/linux/mlx5/mlx5_ifc.h

@@ -7295,7 +7295,8 @@ struct mlx5_ifc_ptys_reg_bits {
 	u8         ib_link_width_oper[0x10];
 	u8         ib_proto_oper[0x10];
 
-	u8         reserved_at_160[0x20];
+	u8         reserved_at_160[0x1c];
+	u8         connector_type[0x4];
 
 	u8         eth_proto_lp_advertise[0x20];
 
@@ -7698,8 +7699,10 @@ struct mlx5_ifc_peir_reg_bits {
 };
 
 struct mlx5_ifc_pcam_enhanced_features_bits {
-	u8         reserved_at_0[0x7e];
+	u8         reserved_at_0[0x7c];
 
+	u8         ptys_connector_type[0x1];
+	u8         reserved_at_7d[0x1];
 	u8         ppcnt_discard_group[0x1];
 	u8         ppcnt_statistical_group[0x1];
 };

include/linux/mlx5/port.h

@@ -92,6 +92,19 @@ enum mlx5e_link_mode {
 	MLX5E_LINK_MODES_NUMBER,
 };
 
+enum mlx5e_connector_type {
+	MLX5E_PORT_UNKNOWN	= 0,
+	MLX5E_PORT_NONE			= 1,
+	MLX5E_PORT_TP			= 2,
+	MLX5E_PORT_AUI			= 3,
+	MLX5E_PORT_BNC			= 4,
+	MLX5E_PORT_MII			= 5,
+	MLX5E_PORT_FIBRE		= 6,
+	MLX5E_PORT_DA			= 7,
+	MLX5E_PORT_OTHER		= 8,
+	MLX5E_CONNECTOR_TYPE_NUMBER,
+};
+
 #define MLX5E_PROT_MASK(link_mode) (1 << link_mode)
 
 #define PORT_MODULE_EVENT_MODULE_STATUS_MASK 0xF