PCI/ERR: Update error status after reset_link()

mainline inclusion
from mainline-v5.7-rc1
commit 6d2c8944
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I47H3V
CVE: NA

--------------------------------

Commit bdb5ac85 ("PCI/ERR: Handle fatal error recovery") uses
reset_link() to recover from fatal errors.  But during fatal error
recovery, if the initial value of error status is PCI_ERS_RESULT_DISCONNECT
or PCI_ERS_RESULT_NO_AER_DRIVER then even after successful recovery (using
reset_link()) pcie_do_recovery() will report the recovery result as
failure.  Update the status of error after reset_link().

You can reproduce this issue by triggering a SW DPC using "DPC Software
Trigger" bit in "DPC Control Register".  You should see recovery failed
dmesg log as below:

  pcieport 0000:00:16.0: DPC: containment event, status:0x1f27 source:0x0000
  pcieport 0000:00:16.0: DPC: software trigger detected
  pci 0000:04:00.0: AER: can't recover (no error_detected callback)
  pcieport 0000:00:16.0: AER: device recovery failed

Fixes: bdb5ac85 ("PCI/ERR: Handle fatal error recovery")
Link: https://lore.kernel.org/r/a255fcb3a3fdebcd90f84e08b555f1786eb8eba2.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com
[bhelgaas: split pci_channel_io_frozen simplification to separate patch]
Signed-off-by: NKuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NKeith Busch <keith.busch@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: NXiongfeng Wang <wangxiongfeng2@huawei.com>
Reviewed-by: NXie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>

drivers/pci/pcie/err.c

@@ -203,7 +203,8 @@ void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state,
 	pci_dbg(dev, "broadcast error_detected message\n");
 	if (state == pci_channel_io_frozen) {
 		pci_walk_bus(bus, report_frozen_detected, &status);
-		if (reset_link(dev, service) != PCI_ERS_RESULT_RECOVERED)
+		status = reset_link(dev, service);
+		if (status != PCI_ERS_RESULT_RECOVERED)
 			goto failed;
 	} else {
 		pci_walk_bus(bus, report_normal_detected, &status);