DDB5477: remove driver bits of support

Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Acked-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

drivers/net/tulip/tulip_core.c

@@ -1471,14 +1471,6 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 			sa_offset = 2;		/* Grrr, damn Matrox boards. */
 			multiport_cnt = 4;
 		}
-#ifdef CONFIG_DDB5477
-               if ((pdev->bus->number == 0) && (PCI_SLOT(pdev->devfn) == 4)) {
-                       /* DDB5477 MAC address in first EEPROM locations. */
-                       sa_offset = 0;
-                       /* No media table either */
-                       tp->flags &= ~HAS_MEDIA_TABLE;
-               }
-#endif
 #ifdef CONFIG_MIPS_COBALT
                if ((pdev->bus->number == 0) &&
                    ((PCI_SLOT(pdev->devfn) == 7) ||

drivers/serial/8250_pci.c

@@ -976,7 +976,6 @@ enum pci_board_num_t {
 	pbn_oxsemi,
 	pbn_intel_i960,
 	pbn_sgi_ioc3,
-	pbn_nec_nile4,
 	pbn_computone_4,
 	pbn_computone_6,
 	pbn_computone_8,
@@ -1442,18 +1441,6 @@ static struct pciserial_board pci_boards[] __devinitdata = {
 		.first_offset	= 0x20178,
 	},
 
-	/*
-	 * NEC Vrc-5074 (Nile 4) builtin UART.
-	 */
-	[pbn_nec_nile4] = {
-		.flags		= FL_BASE0,
-		.num_ports	= 1,
-		.base_baud	= 520833,
-		.uart_offset	= 8 << 3,
-		.reg_shift	= 3,
-		.first_offset	= 0x300,
-	},
-
 	/*
 	 * Computone - uses IOMEM.
 	 */
@@ -2345,13 +2332,6 @@ static struct pci_device_id serial_pci_tbl[] = {
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b2_1_115200 },
 
-	/*
-	 * NEC Vrc-5074 (Nile 4) builtin UART.
-	 */
-	{	PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_NILE4,
-		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
-		pbn_nec_nile4 },
-
 	{	PCI_VENDOR_ID_DCI, PCI_DEVICE_ID_DCI_PCCOM2,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b3_2_115200 },

include/linux/pci_ids.h

@@ -611,7 +611,6 @@
 #define PCI_DEVICE_ID_NEC_CBUS_3	0x003b
 #define PCI_DEVICE_ID_NEC_NAPCCARD	0x003e
 #define PCI_DEVICE_ID_NEC_PCX2		0x0046 /* PowerVR */
-#define PCI_DEVICE_ID_NEC_NILE4		0x005a
 #define PCI_DEVICE_ID_NEC_VRC5476       0x009b
 #define PCI_DEVICE_ID_NEC_VRC4173	0x00a5
 #define PCI_DEVICE_ID_NEC_VRC5477_AC97  0x00a6

sound/oss/Kconfig

@@ -31,14 +31,6 @@ config SOUND_HAL2
 	  Say Y or M if you have an SGI Indy or Indigo2 system and want to be able to
 	  use its on-board A2 audio system.
 
-config SOUND_VRC5477
-	tristate "NEC Vrc5477 AC97 sound"
-	depends on SOUND_PRIME && DDB5477
-	help
-	  Say Y here to enable sound support for the NEC Vrc5477 chip, an
-	  integrated, multi-function controller chip for MIPS CPUs.  Works
-	  with the AC97 codec.
-
 config SOUND_AU1550_AC97
 	tristate "Au1550/Au1200 AC97 Sound"
 	select SND_AC97_CODEC

sound/oss/Makefile

@@ -37,7 +37,6 @@ obj-$(CONFIG_SOUND_MSNDPIN)	+= msnd.o msnd_pinnacle.o
 obj-$(CONFIG_SOUND_VWSND)	+= vwsnd.o
 obj-$(CONFIG_SOUND_ICH)		+= i810_audio.o ac97_codec.o
 obj-$(CONFIG_SOUND_ES1371)	+= es1371.o ac97_codec.o
-obj-$(CONFIG_SOUND_VRC5477)	+= nec_vrc5477.o ac97_codec.o
 obj-$(CONFIG_SOUND_AU1550_AC97)	+= au1550_ac97.o ac97_codec.o
 obj-$(CONFIG_SOUND_TRIDENT)	+= trident.o ac97_codec.o
 obj-$(CONFIG_SOUND_BCM_CS4297A)	+= swarm_cs4297a.o