提交 59fd7e4b 编写于 作者: D Dave Airlie

Merge tag 'drm-intel-next-fixes-2015-04-25' of...

Merge tag 'drm-intel-next-fixes-2015-04-25' of git://anongit.freedesktop.org/drm-intel into drm-fixes

three fixes for i915.

* tag 'drm-intel-next-fixes-2015-04-25' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: vlv: fix save/restore of GFX_MAX_REQ_COUNT reg
  drm/i915: Workaround to avoid lite restore with HEAD==TAIL
  drm/i915: cope with large i2c transfers
......@@ -1038,7 +1038,7 @@ static void vlv_save_gunit_s0ix_state(struct drm_i915_private *dev_priv)
s->lra_limits[i] = I915_READ(GEN7_LRA_LIMITS_BASE + i * 4);
s->media_max_req_count = I915_READ(GEN7_MEDIA_MAX_REQ_COUNT);
s->gfx_max_req_count = I915_READ(GEN7_MEDIA_MAX_REQ_COUNT);
s->gfx_max_req_count = I915_READ(GEN7_GFX_MAX_REQ_COUNT);
s->render_hwsp = I915_READ(RENDER_HWS_PGA_GEN7);
s->ecochk = I915_READ(GAM_ECOCHK);
......@@ -1120,7 +1120,7 @@ static void vlv_restore_gunit_s0ix_state(struct drm_i915_private *dev_priv)
I915_WRITE(GEN7_LRA_LIMITS_BASE + i * 4, s->lra_limits[i]);
I915_WRITE(GEN7_MEDIA_MAX_REQ_COUNT, s->media_max_req_count);
I915_WRITE(GEN7_MEDIA_MAX_REQ_COUNT, s->gfx_max_req_count);
I915_WRITE(GEN7_GFX_MAX_REQ_COUNT, s->gfx_max_req_count);
I915_WRITE(RENDER_HWS_PGA_GEN7, s->render_hwsp);
I915_WRITE(GAM_ECOCHK, s->ecochk);
......
......@@ -2377,10 +2377,11 @@ int __i915_add_request(struct intel_engine_cs *ring,
ret = ring->add_request(ring);
if (ret)
return ret;
request->tail = intel_ring_get_tail(ringbuf);
}
request->head = request_start;
request->tail = intel_ring_get_tail(ringbuf);
/* Whilst this request exists, batch_obj will be on the
* active_list, and so will hold the active reference. Only when this
......
......@@ -1807,6 +1807,7 @@ enum skl_disp_power_wells {
#define GMBUS_CYCLE_INDEX (2<<25)
#define GMBUS_CYCLE_STOP (4<<25)
#define GMBUS_BYTE_COUNT_SHIFT 16
#define GMBUS_BYTE_COUNT_MAX 256U
#define GMBUS_SLAVE_INDEX_SHIFT 8
#define GMBUS_SLAVE_ADDR_SHIFT 1
#define GMBUS_SLAVE_READ (1<<0)
......
......@@ -270,18 +270,17 @@ gmbus_wait_idle(struct drm_i915_private *dev_priv)
}
static int
gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
u32 gmbus1_index)
gmbus_xfer_read_chunk(struct drm_i915_private *dev_priv,
unsigned short addr, u8 *buf, unsigned int len,
u32 gmbus1_index)
{
int reg_offset = dev_priv->gpio_mmio_base;
u16 len = msg->len;
u8 *buf = msg->buf;
I915_WRITE(GMBUS1 + reg_offset,
gmbus1_index |
GMBUS_CYCLE_WAIT |
(len << GMBUS_BYTE_COUNT_SHIFT) |
(msg->addr << GMBUS_SLAVE_ADDR_SHIFT) |
(addr << GMBUS_SLAVE_ADDR_SHIFT) |
GMBUS_SLAVE_READ | GMBUS_SW_RDY);
while (len) {
int ret;
......@@ -303,11 +302,35 @@ gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
}
static int
gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg)
gmbus_xfer_read(struct drm_i915_private *dev_priv, struct i2c_msg *msg,
u32 gmbus1_index)
{
int reg_offset = dev_priv->gpio_mmio_base;
u16 len = msg->len;
u8 *buf = msg->buf;
unsigned int rx_size = msg->len;
unsigned int len;
int ret;
do {
len = min(rx_size, GMBUS_BYTE_COUNT_MAX);
ret = gmbus_xfer_read_chunk(dev_priv, msg->addr,
buf, len, gmbus1_index);
if (ret)
return ret;
rx_size -= len;
buf += len;
} while (rx_size != 0);
return 0;
}
static int
gmbus_xfer_write_chunk(struct drm_i915_private *dev_priv,
unsigned short addr, u8 *buf, unsigned int len)
{
int reg_offset = dev_priv->gpio_mmio_base;
unsigned int chunk_size = len;
u32 val, loop;
val = loop = 0;
......@@ -319,8 +342,8 @@ gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg)
I915_WRITE(GMBUS3 + reg_offset, val);
I915_WRITE(GMBUS1 + reg_offset,
GMBUS_CYCLE_WAIT |
(msg->len << GMBUS_BYTE_COUNT_SHIFT) |
(msg->addr << GMBUS_SLAVE_ADDR_SHIFT) |
(chunk_size << GMBUS_BYTE_COUNT_SHIFT) |
(addr << GMBUS_SLAVE_ADDR_SHIFT) |
GMBUS_SLAVE_WRITE | GMBUS_SW_RDY);
while (len) {
int ret;
......@@ -337,6 +360,29 @@ gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg)
if (ret)
return ret;
}
return 0;
}
static int
gmbus_xfer_write(struct drm_i915_private *dev_priv, struct i2c_msg *msg)
{
u8 *buf = msg->buf;
unsigned int tx_size = msg->len;
unsigned int len;
int ret;
do {
len = min(tx_size, GMBUS_BYTE_COUNT_MAX);
ret = gmbus_xfer_write_chunk(dev_priv, msg->addr, buf, len);
if (ret)
return ret;
buf += len;
tx_size -= len;
} while (tx_size != 0);
return 0;
}
......
......@@ -393,6 +393,26 @@ static void execlists_context_unqueue(struct intel_engine_cs *ring)
}
}
if (IS_GEN8(ring->dev) || IS_GEN9(ring->dev)) {
/*
* WaIdleLiteRestore: make sure we never cause a lite
* restore with HEAD==TAIL
*/
if (req0 && req0->elsp_submitted) {
/*
* Apply the wa NOOPS to prevent ring:HEAD == req:TAIL
* as we resubmit the request. See gen8_emit_request()
* for where we prepare the padding after the end of the
* request.
*/
struct intel_ringbuffer *ringbuf;
ringbuf = req0->ctx->engine[ring->id].ringbuf;
req0->tail += 8;
req0->tail &= ringbuf->size - 1;
}
}
WARN_ON(req1 && req1->elsp_submitted);
execlists_submit_contexts(ring, req0->ctx, req0->tail,
......@@ -1315,7 +1335,12 @@ static int gen8_emit_request(struct intel_ringbuffer *ringbuf,
u32 cmd;
int ret;
ret = intel_logical_ring_begin(ringbuf, request->ctx, 6);
/*
* Reserve space for 2 NOOPs at the end of each request to be
* used as a workaround for not being allowed to do lite
* restore with HEAD==TAIL (WaIdleLiteRestore).
*/
ret = intel_logical_ring_begin(ringbuf, request->ctx, 8);
if (ret)
return ret;
......@@ -1333,6 +1358,14 @@ static int gen8_emit_request(struct intel_ringbuffer *ringbuf,
intel_logical_ring_emit(ringbuf, MI_NOOP);
intel_logical_ring_advance_and_submit(ringbuf, request->ctx, request);
/*
* Here we add two extra NOOPs as padding to avoid
* lite restore of a context with HEAD==TAIL.
*/
intel_logical_ring_emit(ringbuf, MI_NOOP);
intel_logical_ring_emit(ringbuf, MI_NOOP);
intel_logical_ring_advance(ringbuf);
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册