Merge branch 'master'

Documentation/connector/connector.txt

@@ -131,3 +131,47 @@ Netlink itself is not reliable protocol, that means that messages can
 be lost due to memory pressure or process' receiving queue overflowed,
 so caller is warned must be prepared. That is why struct cn_msg [main
 connector's message header] contains u32 seq and u32 ack fields.
+
+/*****************************************/
+Userspace usage.
+/*****************************************/
+2.6.14 has a new netlink socket implementation, which by default does not
+allow to send data to netlink groups other than 1.
+So, if to use netlink socket (for example using connector) 
+with different group number userspace application must subscribe to 
+that group. It can be achieved by following pseudocode:
+
+s = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
+
+l_local.nl_family = AF_NETLINK;
+l_local.nl_groups = 12345;
+l_local.nl_pid = 0;
+
+if (bind(s, (struct sockaddr *)&l_local, sizeof(struct sockaddr_nl)) == -1) {
+	perror("bind");
+	close(s);
+	return -1;
+}
+
+{
+	int on = l_local.nl_groups;
+	setsockopt(s, 270, 1, &on, sizeof(on));
+}
+
+Where 270 above is SOL_NETLINK, and 1 is a NETLINK_ADD_MEMBERSHIP socket
+option. To drop multicast subscription one should call above socket option
+with NETLINK_DROP_MEMBERSHIP parameter which is defined as 0.
+
+2.6.14 netlink code only allows to select a group which is less or equal to
+the maximum group number, which is used at netlink_kernel_create() time.
+In case of connector it is CN_NETLINK_USERS + 0xf, so if you want to use
+group number 12345, you must increment CN_NETLINK_USERS to that number.
+Additional 0xf numbers are allocated to be used by non-in-kernel users.
+
+Due to this limitation, group 0xffffffff does not work now, so one can
+not use add/remove connector's group notifications, but as far as I know, 
+only cn_test.c test module used it.
+
+Some work in netlink area is still being done, so things can be changed in
+2.6.15 timeframe, if it will happen, documentation will be updated for that
+kernel.

Documentation/dell_rbu.txt

@@ -35,6 +35,7 @@ The driver load creates the following directories under the /sys file system.
 /sys/class/firmware/dell_rbu/data
 /sys/devices/platform/dell_rbu/image_type
 /sys/devices/platform/dell_rbu/data
+/sys/devices/platform/dell_rbu/packet_size
 
 The driver supports two types of update mechanism; monolithic and packetized.
 These update mechanism depends upon the BIOS currently running on the system.
@@ -47,8 +48,26 @@ By default the driver uses monolithic memory for the update type. This can be
 changed to packets during the driver load time by specifying the load
 parameter image_type=packet.  This can also be changed later as below
 echo packet > /sys/devices/platform/dell_rbu/image_type
-Also echoing either mono ,packet or init in to image_type will free up the
-memory allocated by the driver.
+
+In packet update mode the packet size has to be given before any packets can
+be downloaded. It is done as below
+echo XXXX > /sys/devices/platform/dell_rbu/packet_size
+In the packet update mechanism, the user neesd to create a new file having
+packets of data arranged back to back. It can be done as follows
+The user creates packets header, gets the chunk of the BIOS image and
+placs it next to the packetheader; now, the packetheader + BIOS image chunk
+added to geather should match the specified packet_size. This makes one
+packet, the user needs to create more such packets out of the entire BIOS
+image file and then arrange all these packets back to back in to one single
+file.
+This file is then copied to /sys/class/firmware/dell_rbu/data.
+Once this file gets to the driver, the driver extracts packet_size data from
+the file and spreads it accross the physical memory in contiguous packet_sized
+space.
+This method makes sure that all the packets get to the driver in a single operation.
+
+In monolithic update the user simply get the BIOS image (.hdr file) and copies
+to the data file as is without any change to the BIOS image itself.
 
 Do the steps below to download the BIOS image.
 1) echo 1 > /sys/class/firmware/dell_rbu/loading
@@ -58,7 +77,10 @@ Do the steps below to download the BIOS image.
 The /sys/class/firmware/dell_rbu/ entries will remain till the following is
 done.
 echo -1 > /sys/class/firmware/dell_rbu/loading.
-Until this step is completed the drivr cannot be unloaded.
+Until this step is completed the driver cannot be unloaded.
+Also echoing either mono ,packet or init in to image_type will free up the
+memory allocated by the driver.
+
 If an user by accident executes steps 1 and 3 above without executing step 2;
 it will make the /sys/class/firmware/dell_rbu/ entries to disappear.
 The entries can be recreated by doing the following
@@ -66,15 +88,11 @@ echo init > /sys/devices/platform/dell_rbu/image_type
 NOTE: echoing init in image_type does not change it original value.
 
 Also the driver provides /sys/devices/platform/dell_rbu/data readonly file to
-read back the image downloaded. This is useful in case of packet update
-mechanism where the above steps 1,2,3 will repeated for every packet.
-By reading the /sys/devices/platform/dell_rbu/data file all packet data
-downloaded can be verified in a single file.
-The packets are arranged in this file one after the other in a FIFO order.
+read back the image downloaded.
 
 NOTE:
-This driver requires a patch for firmware_class.c which has the addition
-of request_firmware_nowait_nohotplug function to wortk
+This driver requires a patch for firmware_class.c which has the modified
+request_firmware_nowait function.
 Also after updating the BIOS image an user mdoe application neeeds to execute
 code which message the BIOS update request to the BIOS. So on the next reboot
 the BIOS knows about the new image downloaded and it updates it self.

Documentation/keys-request-key.txt

+			      ===================
+			      KEY REQUEST SERVICE
+			      ===================
+
+The key request service is part of the key retention service (refer to
+Documentation/keys.txt). This document explains more fully how that the
+requesting algorithm works.
+
+The process starts by either the kernel requesting a service by calling
+request_key():
+
+	struct key *request_key(const struct key_type *type,
+				const char *description,
+				const char *callout_string);
+
+Or by userspace invoking the request_key system call:
+
+	key_serial_t request_key(const char *type,
+				 const char *description,
+				 const char *callout_info,
+				 key_serial_t dest_keyring);
+
+The main difference between the two access points is that the in-kernel
+interface does not need to link the key to a keyring to prevent it from being
+immediately destroyed. The kernel interface returns a pointer directly to the
+key, and it's up to the caller to destroy the key.
+
+The userspace interface links the key to a keyring associated with the process
+to prevent the key from going away, and returns the serial number of the key to
+the caller.
+
+
+===========
+THE PROCESS
+===========
+
+A request proceeds in the following manner:
+
+ (1) Process A calls request_key() [the userspace syscall calls the kernel
+     interface].
+
+ (2) request_key() searches the process's subscribed keyrings to see if there's
+     a suitable key there. If there is, it returns the key. If there isn't, and
+     callout_info is not set, an error is returned. Otherwise the process
+     proceeds to the next step.
+
+ (3) request_key() sees that A doesn't have the desired key yet, so it creates
+     two things:
+
+     (a) An uninstantiated key U of requested type and description.
+
+     (b) An authorisation key V that refers to key U and notes that process A
+     	 is the context in which key U should be instantiated and secured, and
+     	 from which associated key requests may be satisfied.
+
+ (4) request_key() then forks and executes /sbin/request-key with a new session
+     keyring that contains a link to auth key V.
+
+ (5) /sbin/request-key execs an appropriate program to perform the actual
+     instantiation.
+
+ (6) The program may want to access another key from A's context (say a
+     Kerberos TGT key). It just requests the appropriate key, and the keyring
+     search notes that the session keyring has auth key V in its bottom level.
+
+     This will permit it to then search the keyrings of process A with the
+     UID, GID, groups and security info of process A as if it was process A,
+     and come up with key W.
+
+ (7) The program then does what it must to get the data with which to
+     instantiate key U, using key W as a reference (perhaps it contacts a
+     Kerberos server using the TGT) and then instantiates key U.
+
+ (8) Upon instantiating key U, auth key V is automatically revoked so that it
+     may not be used again.
+
+ (9) The program then exits 0 and request_key() deletes key V and returns key
+     U to the caller.
+
+This also extends further. If key W (step 5 above) didn't exist, key W would be
+created uninstantiated, another auth key (X) would be created [as per step 3]
+and another copy of /sbin/request-key spawned [as per step 4]; but the context
+specified by auth key X will still be process A, as it was in auth key V.
+
+This is because process A's keyrings can't simply be attached to
+/sbin/request-key at the appropriate places because (a) execve will discard two
+of them, and (b) it requires the same UID/GID/Groups all the way through.
+
+
+======================
+NEGATIVE INSTANTIATION
+======================
+
+Rather than instantiating a key, it is possible for the possessor of an
+authorisation key to negatively instantiate a key that's under construction.
+This is a short duration placeholder that causes any attempt at re-requesting
+the key whilst it exists to fail with error ENOKEY.
+
+This is provided to prevent excessive repeated spawning of /sbin/request-key
+processes for a key that will never be obtainable.
+
+Should the /sbin/request-key process exit anything other than 0 or die on a
+signal, the key under construction will be automatically negatively
+instantiated for a short amount of time.
+
+
+====================
+THE SEARCH ALGORITHM
+====================
+
+A search of any particular keyring proceeds in the following fashion:
+
+ (1) When the key management code searches for a key (keyring_search_aux) it
+     firstly calls key_permission(SEARCH) on the keyring it's starting with,
+     if this denies permission, it doesn't search further.
+
+ (2) It considers all the non-keyring keys within that keyring and, if any key
+     matches the criteria specified, calls key_permission(SEARCH) on it to see
+     if the key is allowed to be found. If it is, that key is returned; if
+     not, the search continues, and the error code is retained if of higher
+     priority than the one currently set.
+
+ (3) It then considers all the keyring-type keys in the keyring it's currently
+     searching. It calls key_permission(SEARCH) on each keyring, and if this
+     grants permission, it recurses, executing steps (2) and (3) on that
+     keyring.
+
+The process stops immediately a valid key is found with permission granted to
+use it. Any error from a previous match attempt is discarded and the key is
+returned.
+
+When search_process_keyrings() is invoked, it performs the following searches
+until one succeeds:
+
+ (1) If extant, the process's thread keyring is searched.
+
+ (2) If extant, the process's process keyring is searched.
+
+ (3) The process's session keyring is searched.
+
+ (4) If the process has a request_key() authorisation key in its session
+     keyring then:
+
+     (a) If extant, the calling process's thread keyring is searched.
+
+     (b) If extant, the calling process's process keyring is searched.
+
+     (c) The calling process's session keyring is searched.
+
+The moment one succeeds, all pending errors are discarded and the found key is
+returned.
+
+Only if all these fail does the whole thing fail with the highest priority
+error. Note that several errors may have come from LSM.
+
+The error priority is:
+
+	EKEYREVOKED > EKEYEXPIRED > ENOKEY
+
+EACCES/EPERM are only returned on a direct search of a specific keyring where
+the basal keyring does not grant Search permission.

Documentation/keys.txt

@@ -361,6 +361,8 @@ The main syscalls are:
      /sbin/request-key will be invoked in an attempt to obtain a key. The
      callout_info string will be passed as an argument to the program.
 
+     See also Documentation/keys-request-key.txt.
+
 
 The keyctl syscall functions are:
 
@@ -533,8 +535,8 @@ The keyctl syscall functions are:
 
  (*) Read the payload data from a key:
 
-	key_serial_t keyctl(KEYCTL_READ, key_serial_t keyring, char *buffer,
-			    size_t buflen);
+	long keyctl(KEYCTL_READ, key_serial_t keyring, char *buffer,
+		    size_t buflen);
 
      This function attempts to read the payload data from the specified key
      into the buffer. The process must have read permission on the key to
@@ -555,9 +557,9 @@ The keyctl syscall functions are:
 
  (*) Instantiate a partially constructed key.
 
-	key_serial_t keyctl(KEYCTL_INSTANTIATE, key_serial_t key,
-			    const void *payload, size_t plen,
-			    key_serial_t keyring);
+	long keyctl(KEYCTL_INSTANTIATE, key_serial_t key,
+		    const void *payload, size_t plen,
+		    key_serial_t keyring);
 
      If the kernel calls back to userspace to complete the instantiation of a
      key, userspace should use this call to supply data for the key before the
@@ -576,8 +578,8 @@ The keyctl syscall functions are:
 
  (*) Negatively instantiate a partially constructed key.
 
-	key_serial_t keyctl(KEYCTL_NEGATE, key_serial_t key,
-			    unsigned timeout, key_serial_t keyring);
+	long keyctl(KEYCTL_NEGATE, key_serial_t key,
+		    unsigned timeout, key_serial_t keyring);
 
      If the kernel calls back to userspace to complete the instantiation of a
      key, userspace should use this call mark the key as negative before the
@@ -688,6 +690,8 @@ payload contents" for more information.
     If successful, the key will have been attached to the default keyring for
     implicitly obtained request-key keys, as set by KEYCTL_SET_REQKEY_KEYRING.
 
+    See also Documentation/keys-request-key.txt.
+
 
 (*) When it is no longer required, the key should be released using:
 

Makefile

 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 14
-EXTRAVERSION =-rc3
+EXTRAVERSION =-rc4
 NAME=Affluent Albatross
 
 # *DOCUMENTATION*

arch/arm/Makefile

@@ -53,7 +53,7 @@ tune-$(CONFIG_CPU_ARM926T)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_SA110)	:=-mtune=strongarm110
 tune-$(CONFIG_CPU_SA1100)	:=-mtune=strongarm1100
 tune-$(CONFIG_CPU_XSCALE)	:=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_V6)		:=-mtune=strongarm
+tune-$(CONFIG_CPU_V6)		:=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
 
 # Need -Uarm for gcc < 3.x
 CFLAGS_ABI	:=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,)

arch/arm/common/scoop.c

@@ -26,6 +26,8 @@ struct scoop_pcmcia_dev *scoop_devs;
 struct  scoop_dev {
 	void  *base;
 	spinlock_t scoop_lock;
+	unsigned short suspend_clr;
+	unsigned short suspend_set;
 	u32 scoop_gpwr;
 };
 
@@ -90,14 +92,24 @@ EXPORT_SYMBOL(reset_scoop);
 EXPORT_SYMBOL(read_scoop_reg);
 EXPORT_SYMBOL(write_scoop_reg);
 
+static void check_scoop_reg(struct scoop_dev *sdev)
+{
+	unsigned short mcr;
+
+	mcr = SCOOP_REG(sdev->base, SCOOP_MCR);
+	if ((mcr & 0x100) == 0)
+		SCOOP_REG(sdev->base, SCOOP_MCR) = 0x0101;
+}
+
 #ifdef CONFIG_PM
 static int scoop_suspend(struct device *dev, pm_message_t state, uint32_t level)
 {
 	if (level == SUSPEND_POWER_DOWN) {
 		struct scoop_dev *sdev = dev_get_drvdata(dev);
 
-		sdev->scoop_gpwr = SCOOP_REG(sdev->base,SCOOP_GPWR);
-		SCOOP_REG(sdev->base,SCOOP_GPWR) = 0;
+		check_scoop_reg(sdev);
+  		sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR);
+		SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set;
 	}
 	return 0;
 }
@@ -107,6 +119,7 @@ static int scoop_resume(struct device *dev, uint32_t level)
 	if (level == RESUME_POWER_ON) {
 		struct scoop_dev *sdev = dev_get_drvdata(dev);
 
+		check_scoop_reg(sdev);
 		SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr;
 	}
 	return 0;
@@ -151,6 +164,9 @@ int __init scoop_probe(struct device *dev)
 	SCOOP_REG(devptr->base, SCOOP_GPCR) = inf->io_dir & 0xffff;
 	SCOOP_REG(devptr->base, SCOOP_GPWR) = inf->io_out & 0xffff;
 
+	devptr->suspend_clr = inf->suspend_clr;
+	devptr->suspend_set = inf->suspend_set;
+
 	return 0;
 }
 

arch/arm/configs/collie_defconfig

+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc3
+# Sun Oct  9 16:55:14 2005
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+# CONFIG_CLEAN_COMPILE is not set
+CONFIG_BROKEN=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+CONFIG_HOTPLUG=y
+CONFIG_KOBJECT_UEVENT=y
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_OBSOLETE_MODPARM=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+CONFIG_ARCH_SA1100=y
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+
+#
+# SA11x0 Implementations
+#
+# CONFIG_SA1100_ASSABET is not set
+# CONFIG_SA1100_CERF is not set
+CONFIG_SA1100_COLLIE=y
+# CONFIG_SA1100_H3100 is not set
+# CONFIG_SA1100_H3600 is not set
+# CONFIG_SA1100_H3800 is not set
+# CONFIG_SA1100_BADGE4 is not set
+# CONFIG_SA1100_JORNADA720 is not set
+# CONFIG_SA1100_HACKKIT is not set
+# CONFIG_SA1100_LART is not set
+# CONFIG_SA1100_PLEB is not set
+# CONFIG_SA1100_SHANNON is not set
+# CONFIG_SA1100_SIMPAD is not set
+# CONFIG_SA1100_SSP is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_SA1100=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_EV4=y
+CONFIG_CPU_CACHE_V4WB=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WB=y
+
+#
+# Processor Features
+#
+CONFIG_SHARP_LOCOMO=y
+CONFIG_SHARP_PARAM=y
+CONFIG_SHARP_SCOOP=y
+
+#
+# Bus support
+#
+CONFIG_ISA=y
+CONFIG_ISA_DMA_API=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_SMP is not set
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2   debug"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_APM=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+# CONFIG_IPV6 is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_OBSOLETE_CHIPS=y
+# CONFIG_MTD_AMDSTD is not set
+CONFIG_MTD_SHARP=y
+# CONFIG_MTD_JEDEC is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNP is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_XD is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=1024
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+# CONFIG_NETDEVICES is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_TSDEV=y
+CONFIG_INPUT_TSDEV_SCREEN_X=240
+CONFIG_INPUT_TSDEV_SCREEN_Y=320
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_LOCOMO=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SA1100=y
+CONFIG_SERIAL_SA1100_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+# CONFIG_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+CONFIG_I2C=m
+# CONFIG_I2C_CHARDEV is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=m
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ELEKTOR is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_ISA is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_DS1337 is not set
+# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+# CONFIG_MCP_SA11X0 is not set
+
+#
+# Multimedia devices
+#
+CONFIG_VIDEO_DEV=m
+
+#
+# Video For Linux
+#
+
+#
+# Video Adapters
+#
+# CONFIG_VIDEO_PMS is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_TUNER_3036 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+
+#
+# Radio Adapters
+#
+# CONFIG_RADIO_CADET is not set
+# CONFIG_RADIO_RTRACK is not set
+# CONFIG_RADIO_RTRACK2 is not set
+# CONFIG_RADIO_AZTECH is not set
+# CONFIG_RADIO_GEMTEK is not set
+# CONFIG_RADIO_MAESTRO is not set
+# CONFIG_RADIO_SF16FMI is not set
+# CONFIG_RADIO_SF16FMR2 is not set
+# CONFIG_RADIO_TERRATEC is not set
+# CONFIG_RADIO_TRUST is not set
+# CONFIG_RADIO_TYPHOON is not set
+# CONFIG_RADIO_ZOLTRIX is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+CONFIG_FB_SA1100=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+
+#
+# Logo configuration
+#
+# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB is not set
+
+#
+# USB Gadget Support
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_PXA2XX is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_JBD is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_INOTIFY=y
+# CONFIG_QUOTA is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_WAITQ is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y

arch/arm/kernel/armksyms.c

@@ -45,8 +45,8 @@ extern void fp_enter(void);
 
 #define EXPORT_SYMBOL_ALIAS(sym,orig)		\
  EXPORT_CRC_ALIAS(sym)				\
- const struct kernel_symbol __ksymtab_##sym	\
-  __attribute__((section("__ksymtab"))) =	\
+ static const struct kernel_symbol __ksymtab_##sym	\
+  __attribute_used__ __attribute__((section("__ksymtab"))) =	\
     { (unsigned long)&orig, #sym };
 
 /*

arch/arm/kernel/entry-common.S

@@ -106,15 +106,10 @@ ENTRY(ret_from_fork)
 	.endm
 
 .Larm700bug:
-	ldr	r0, [sp, #S_PSR]		@ Get calling cpsr
-	sub	lr, lr, #4
-	str	lr, [r8]
-	msr	spsr_cxsf, r0
 	ldmia	sp, {r0 - lr}^			@ Get calling r0 - lr
 	mov	r0, r0
-	ldr	lr, [sp, #S_PC]			@ Get PC
 	add	sp, sp, #S_FRAME_SIZE
-	movs	pc, lr
+	subs	pc, lr, #4
 #else
 	.macro	arm710_bug_check, instr, temp
 	.endm

arch/arm/mach-pxa/corgi.c

@@ -36,6 +36,7 @@
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>
 #include <asm/arch/corgi.h>
+#include <asm/arch/sharpsl.h>
 
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>

arch/arm/mach-s3c2410/mach-anubis.c

@@ -125,7 +125,7 @@ static int external_map[]   = { 2 };
 static int chip0_map[]      = { 0 };
 static int chip1_map[]      = { 1 };
 
-struct mtd_partition anubis_default_nand_part[] = {
+static struct mtd_partition anubis_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_16K,

arch/arm/mach-s3c2410/mach-bast.c

@@ -230,7 +230,7 @@ static int chip0_map[] = { 1 };
 static int chip1_map[] = { 2 };
 static int chip2_map[] = { 3 };
 
-struct mtd_partition bast_default_nand_part[] = {
+static struct mtd_partition bast_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_16K,
@@ -340,7 +340,7 @@ static struct resource bast_dm9k_resource[] = {
  * better IO routines can be written and tested
 */
 
-struct dm9000_plat_data bast_dm9k_platdata = {
+static struct dm9000_plat_data bast_dm9k_platdata = {
 	.flags		= DM9000_PLATF_16BITONLY
 };
 

arch/arm/mach-s3c2410/mach-vr1000.c

@@ -288,7 +288,7 @@ static struct resource vr1000_dm9k1_resource[] = {
  * better IO routines can be written and tested
 */
 
-struct dm9000_plat_data vr1000_dm9k_platdata = {
+static struct dm9000_plat_data vr1000_dm9k_platdata = {
 	.flags		= DM9000_PLATF_16BITONLY,
 };
 

arch/arm/mach-s3c2410/s3c2410.c

@@ -125,9 +125,6 @@ static struct platform_device *uart_devices[] __initdata = {
 	&s3c_uart2
 };
 
-/* store our uart devices for the serial driver console */
-struct platform_device *s3c2410_uart_devices[3];
-
 static int s3c2410_uart_count = 0;
 
 /* uart registration process */

arch/arm/mach-s3c2410/s3c2440.c

@@ -151,7 +151,7 @@ void __init s3c2440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 
 #ifdef CONFIG_PM
 
-struct sleep_save s3c2440_sleep[] = {
+static struct sleep_save s3c2440_sleep[] = {
 	SAVE_ITEM(S3C2440_DSC0),
 	SAVE_ITEM(S3C2440_DSC1),
 	SAVE_ITEM(S3C2440_GPJDAT),
@@ -260,7 +260,7 @@ void __init s3c2440_init_clocks(int xtal)
  * as a driver which may support both 2410 and 2440 may try and use it.
 */
 
-int __init s3c2440_core_init(void)
+static int __init s3c2440_core_init(void)
 {
 	return sysdev_class_register(&s3c2440_sysclass);
 }

arch/arm/mach-s3c2410/time.c

@@ -38,6 +38,7 @@
 #include <asm/hardware/clock.h>
 
 #include "clock.h"
+#include "cpu.h"
 
 static unsigned long timer_startval;
 static unsigned long timer_usec_ticks;

arch/arm/mach-sa1100/collie.c

@@ -111,11 +111,11 @@ static struct mtd_partition collie_partitions[] = {
 
 static void collie_set_vpp(int vpp)
 {
-	write_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR, read_scoop_reg(SCOOP_GPCR) | COLLIE_SCP_VPEN);
+	write_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR) | COLLIE_SCP_VPEN);
 	if (vpp)
-		write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) | COLLIE_SCP_VPEN);
+		write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) | COLLIE_SCP_VPEN);
 	else
-		write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) & ~COLLIE_SCP_VPEN);
+		write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) & ~COLLIE_SCP_VPEN);
 }
 
 static struct flash_platform_data collie_flash_data = {

arch/arm/mm/Kconfig

@@ -370,21 +370,21 @@ config CPU_BIG_ENDIAN
 
 config CPU_ICACHE_DISABLE
 	bool "Disable I-Cache"
-	depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020
+	depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6
 	help
 	  Say Y here to disable the processor instruction cache. Unless
 	  you have a reason not to or are unsure, say N.
 
 config CPU_DCACHE_DISABLE
 	bool "Disable D-Cache"
-	depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020
+	depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6
 	help
 	  Say Y here to disable the processor data cache. Unless
 	  you have a reason not to or are unsure, say N.
 
 config CPU_DCACHE_WRITETHROUGH
 	bool "Force write through D-cache"
-	depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020) && !CPU_DCACHE_DISABLE
+	depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6) && !CPU_DCACHE_DISABLE
 	default y if CPU_ARM925T
 	help
 	  Say Y here to use the data cache in writethrough mode. Unless you
@@ -399,7 +399,7 @@ config CPU_CACHE_ROUND_ROBIN
 
 config CPU_BPREDICT_DISABLE
 	bool "Disable branch prediction"
-	depends on CPU_ARM1020
+	depends on CPU_ARM1020 || CPU_V6
 	help
 	  Say Y here to disable branch prediction.  If unsure, say N.
 

arch/arm/mm/alignment.c

@@ -111,7 +111,7 @@ proc_alignment_read(char *page, char **start, off_t off, int count, int *eof,
 }
 
 static int proc_alignment_write(struct file *file, const char __user *buffer,
-			       unsigned long count, void *data)
+				unsigned long count, void *data)
 {
 	char mode;
 
@@ -119,7 +119,7 @@ static int proc_alignment_write(struct file *file, const char __user *buffer,
 		if (get_user(mode, buffer))
 			return -EFAULT;
 		if (mode >= '0' && mode <= '5')
-			   ai_usermode = mode - '0';
+			ai_usermode = mode - '0';
 	}
 	return count;
 }
@@ -262,7 +262,7 @@ union offset_union {
 			goto fault;				\
 	} while (0)
 
-#define put32_unaligned_check(val,addr)	 \
+#define put32_unaligned_check(val,addr) \
 	__put32_unaligned_check("strb", val, addr)
 
 #define put32t_unaligned_check(val,addr) \
@@ -306,19 +306,19 @@ do_alignment_ldrhstrh(unsigned long addr, unsigned long instr, struct pt_regs *r
 	return TYPE_LDST;
 
  user:
- 	if (LDST_L_BIT(instr)) {
- 		unsigned long val;
- 		get16t_unaligned_check(val, addr);
+	if (LDST_L_BIT(instr)) {
+		unsigned long val;
+		get16t_unaligned_check(val, addr);
 
- 		/* signed half-word? */
- 		if (instr & 0x40)
- 			val = (signed long)((signed short) val);
+		/* signed half-word? */
+		if (instr & 0x40)
+			val = (signed long)((signed short) val);
 
- 		regs->uregs[rd] = val;
- 	} else
- 		put16t_unaligned_check(regs->uregs[rd], addr);
+		regs->uregs[rd] = val;
+	} else
+		put16t_unaligned_check(regs->uregs[rd], addr);
 
- 	return TYPE_LDST;
+	return TYPE_LDST;
 
  fault:
 	return TYPE_FAULT;
@@ -330,6 +330,9 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr,
 {
 	unsigned int rd = RD_BITS(instr);
 
+	if (((rd & 1) == 1) || (rd == 14))
+		goto bad;
+
 	ai_dword += 1;
 
 	if (user_mode(regs))
@@ -339,11 +342,11 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr,
 		unsigned long val;
 		get32_unaligned_check(val, addr);
 		regs->uregs[rd] = val;
-		get32_unaligned_check(val, addr+4);
-		regs->uregs[rd+1] = val;
+		get32_unaligned_check(val, addr + 4);
+		regs->uregs[rd + 1] = val;
 	} else {
 		put32_unaligned_check(regs->uregs[rd], addr);
-		put32_unaligned_check(regs->uregs[rd+1], addr+4);
+		put32_unaligned_check(regs->uregs[rd + 1], addr + 4);
 	}
 
 	return TYPE_LDST;
@@ -353,15 +356,16 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr,
 		unsigned long val;
 		get32t_unaligned_check(val, addr);
 		regs->uregs[rd] = val;
-		get32t_unaligned_check(val, addr+4);
-		regs->uregs[rd+1] = val;
+		get32t_unaligned_check(val, addr + 4);
+		regs->uregs[rd + 1] = val;
 	} else {
 		put32t_unaligned_check(regs->uregs[rd], addr);
-		put32t_unaligned_check(regs->uregs[rd+1], addr+4);
+		put32t_unaligned_check(regs->uregs[rd + 1], addr + 4);
 	}
 
 	return TYPE_LDST;
-
+ bad:
+	return TYPE_ERROR;
  fault:
 	return TYPE_FAULT;
 }
@@ -439,7 +443,7 @@ do_alignment_ldmstm(unsigned long addr, unsigned long instr, struct pt_regs *reg
 	if (LDST_P_EQ_U(instr))	/* U = P */
 		eaddr += 4;
 
-	/* 
+	/*
 	 * For alignment faults on the ARM922T/ARM920T the MMU  makes
 	 * the FSR (and hence addr) equal to the updated base address
 	 * of the multiple access rather than the restored value.
@@ -566,7 +570,7 @@ thumb2arm(u16 tinstr)
 	/* 6.5.1 Format 3: */
 	case 0x4800 >> 11:				/* 7.1.28 LDR(3) */
 		/* NOTE: This case is not technically possible. We're
-		 * 	 loading 32-bit memory data via PC relative
+		 *	 loading 32-bit memory data via PC relative
 		 *	 addressing mode. So we can and should eliminate
 		 *	 this case. But I'll leave it here for now.
 		 */
@@ -638,7 +642,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 
 	if (fault) {
 		type = TYPE_FAULT;
- 		goto bad_or_fault;
+		goto bad_or_fault;
 	}
 
 	if (user_mode(regs))
@@ -663,6 +667,8 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 		else if ((instr & 0x001000f0) == 0x000000d0 || /* LDRD */
 			 (instr & 0x001000f0) == 0x000000f0)   /* STRD */
 			handler = do_alignment_ldrdstrd;
+		else if ((instr & 0x01f00ff0) == 0x01000090) /* SWP */
+			goto swp;
 		else
 			goto bad;
 		break;
@@ -733,6 +739,9 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	do_bad_area(current, current->mm, addr, fsr, regs);
 	return 0;
 
+ swp:
+	printk(KERN_ERR "Alignment trap: not handling swp instruction\n");
+
  bad:
 	/*
 	 * Oops, we didn't handle the instruction.

arch/arm/nwfpe/fpa11.c

@@ -31,11 +31,6 @@
 #include <linux/string.h>
 #include <asm/system.h>
 
-/* forward declarations */
-unsigned int EmulateCPDO(const unsigned int);
-unsigned int EmulateCPDT(const unsigned int);
-unsigned int EmulateCPRT(const unsigned int);
-
 /* Reset the FPA11 chip.  Called to initialize and reset the emulator. */
 static void resetFPA11(void)
 {

arch/arm/nwfpe/fpa11.h

@@ -95,4 +95,24 @@ extern int8 SetRoundingMode(const unsigned int);
 extern int8 SetRoundingPrecision(const unsigned int);
 extern void nwfpe_init_fpa(union fp_state *fp);
 
+extern unsigned int EmulateAll(unsigned int opcode);
+
+extern unsigned int EmulateCPDT(const unsigned int opcode);
+extern unsigned int EmulateCPDO(const unsigned int opcode);
+extern unsigned int EmulateCPRT(const unsigned int opcode);
+
+/* fpa11_cpdt.c */
+extern unsigned int PerformLDF(const unsigned int opcode);
+extern unsigned int PerformSTF(const unsigned int opcode);
+extern unsigned int PerformLFM(const unsigned int opcode);
+extern unsigned int PerformSFM(const unsigned int opcode);
+
+/* single_cpdo.c */
+
+extern unsigned int SingleCPDO(struct roundingData *roundData,
+			       const unsigned int opcode, FPREG * rFd);
+/* double_cpdo.c */
+extern unsigned int DoubleCPDO(struct roundingData *roundData,
+			       const unsigned int opcode, FPREG * rFd);
+
 #endif

arch/arm/nwfpe/fpa11_cprt.c

@@ -26,12 +26,11 @@
 #include "fpa11.inl"
 #include "fpmodule.h"
 #include "fpmodule.inl"
+#include "softfloat.h"
 
 #ifdef CONFIG_FPE_NWFPE_XP
 extern flag floatx80_is_nan(floatx80);
 #endif
-extern flag float64_is_nan(float64);
-extern flag float32_is_nan(float32);
 
 unsigned int PerformFLT(const unsigned int opcode);
 unsigned int PerformFIX(const unsigned int opcode);

arch/arm/nwfpe/fpopcode.h

@@ -476,4 +476,10 @@ static inline unsigned int getDestinationSize(const unsigned int opcode)
 	return (nRc);
 }
 
+extern unsigned int checkCondition(const unsigned int opcode,
+				   const unsigned int ccodes);
+
+extern const float64 float64Constant[];
+extern const float32 float32Constant[];
+
 #endif

arch/arm/nwfpe/softfloat.h

@@ -265,4 +265,7 @@ static inline flag float64_lt_nocheck(float64 a, float64 b)
 	return (a != b) && (aSign ^ (a < b));
 }
 
+extern flag float32_is_nan( float32 a );
+extern flag float64_is_nan( float64 a );
+
 #endif

arch/arm/tools/mach-types

@@ -2,11 +2,17 @@
 #
 # This file is linux/arch/arm/tools/mach-types
 #
+# Up to date versions of this file can be obtained from:
+#
+#   http://www.arm.linux.org.uk/developer/machines/?action=download
+#
 # Please do not send patches to this file; it is automatically generated!
 # To add an entry into this database, please see Documentation/arm/README,
-# or contact rmk@arm.linux.org.uk
+# or visit:
+#
+#   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Thu Jun 23 20:19:33 2005
+# Last update: Mon Oct 10 09:46:25 2005
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -421,7 +427,7 @@ mt02			MACH_MT02		MT02			410
 mport3s			MACH_MPORT3S		MPORT3S			411
 ra_alpha		MACH_RA_ALPHA		RA_ALPHA		412
 xcep			MACH_XCEP		XCEP			413
-arcom_mercury		MACH_ARCOM_MERCURY	ARCOM_MERCURY		414
+arcom_vulcan		MACH_ARCOM_VULCAN	ARCOM_VULCAN		414
 stargate		MACH_STARGATE		STARGATE		415
 armadilloj		MACH_ARMADILLOJ		ARMADILLOJ		416
 elroy_jack		MACH_ELROY_JACK		ELROY_JACK		417
@@ -454,7 +460,7 @@ esl_sarva		MACH_ESL_SARVA		ESL_SARVA		443
 xm250			MACH_XM250		XM250			444
 t6tc1xb			MACH_T6TC1XB		T6TC1XB			445
 ess710			MACH_ESS710		ESS710			446
-mx3ads			MACH_MX3ADS		MX3ADS			447
+mx31ads			MACH_MX3ADS		MX3ADS			447
 himalaya		MACH_HIMALAYA		HIMALAYA		448
 bolfenk			MACH_BOLFENK		BOLFENK			449
 at91rm9200kr		MACH_AT91RM9200KR	AT91RM9200KR		450
@@ -787,3 +793,79 @@ ez_ixp42x		MACH_EZ_IXP42X		EZ_IXP42X		778
 tapwave_zodiac		MACH_TAPWAVE_ZODIAC	TAPWAVE_ZODIAC		779
 universalmeter		MACH_UNIVERSALMETER	UNIVERSALMETER		780
 hicoarm9		MACH_HICOARM9		HICOARM9		781
+pnx4008			MACH_PNX4008		PNX4008			782
+kws6000			MACH_KWS6000		KWS6000			783
+portux920t		MACH_PORTUX920T		PORTUX920T		784
+ez_x5			MACH_EZ_X5		EZ_X5			785
+omap_rudolph		MACH_OMAP_RUDOLPH	OMAP_RUDOLPH		786
+cpuat91			MACH_CPUAT91		CPUAT91			787
+rea9200			MACH_REA9200		REA9200			788
+acts_pune_sa1110	MACH_ACTS_PUNE_SA1110	ACTS_PUNE_SA1110	789
+ixp425			MACH_IXP425		IXP425			790
+argonplusodyssey	MACH_ODYSSEY		ODYSSEY			791
+perch			MACH_PERCH		PERCH			792
+eis05r1			MACH_EIS05R1		EIS05R1			793
+pepperpad		MACH_PEPPERPAD		PEPPERPAD		794
+sb3010			MACH_SB3010		SB3010			795
+rm9200			MACH_RM9200		RM9200			796
+dma03			MACH_DMA03		DMA03			797
+road_s101		MACH_ROAD_S101		ROAD_S101		798
+iq_nextgen_a		MACH_IQ_NEXTGEN_A	IQ_NEXTGEN_A		799
+iq_nextgen_b		MACH_IQ_NEXTGEN_B	IQ_NEXTGEN_B		800
+iq_nextgen_c		MACH_IQ_NEXTGEN_C	IQ_NEXTGEN_C		801
+iq_nextgen_d		MACH_IQ_NEXTGEN_D	IQ_NEXTGEN_D		802
+iq_nextgen_e		MACH_IQ_NEXTGEN_E	IQ_NEXTGEN_E		803
+mallow_at91		MACH_MALLOW_AT91	MALLOW_AT91		804
+cybertracker		MACH_CYBERTRACKER	CYBERTRACKER		805
+gesbc931x		MACH_GESBC931X		GESBC931X		806
+centipad		MACH_CENTIPAD		CENTIPAD		807
+armsoc			MACH_ARMSOC		ARMSOC			808
+se4200			MACH_SE4200		SE4200			809
+ems197a			MACH_EMS197A		EMS197A			810
+micro9			MACH_MICRO9		MICRO9			811
+micro9l			MACH_MICRO9L		MICRO9L			812
+uc5471dsp		MACH_UC5471DSP		UC5471DSP		813
+sj5471eng		MACH_SJ5471ENG		SJ5471ENG		814
+none			MACH_CMPXA26X		CMPXA26X		815
+nc			MACH_NC			NC			816
+omap_palmte		MACH_OMAP_PALMTE	OMAP_PALMTE		817
+ajax52x			MACH_AJAX52X		AJAX52X			818
+siriustar		MACH_SIRIUSTAR		SIRIUSTAR		819
+iodata_hdlg		MACH_IODATA_HDLG	IODATA_HDLG		820
+at91rm9200utl		MACH_AT91RM9200UTL	AT91RM9200UTL		821
+biosafe			MACH_BIOSAFE		BIOSAFE			822
+mp1000			MACH_MP1000		MP1000			823
+parsy			MACH_PARSY		PARSY			824
+ccxp270			MACH_CCXP		CCXP			825
+omap_gsample		MACH_OMAP_GSAMPLE	OMAP_GSAMPLE		826
+realview_eb		MACH_REALVIEW_EB	REALVIEW_EB		827
+samoa			MACH_SAMOA		SAMOA			828
+t3xscale		MACH_T3XSCALE		T3XSCALE		829
+i878			MACH_I878		I878			830
+borzoi			MACH_BORZOI		BORZOI			831
+gecko			MACH_GECKO		GECKO			832
+ds101			MACH_DS101		DS101			833
+omap_palmtt2		MACH_OMAP_PALMTT2	OMAP_PALMTT2		834
+xscale_palmld		MACH_XSCALE_PALMLD	XSCALE_PALMLD		835
+cc9c			MACH_CC9C		CC9C			836
+sbc1670			MACH_SBC1670		SBC1670			837
+ixdp28x5		MACH_IXDP28X5		IXDP28X5		838
+omap_palmtt		MACH_OMAP_PALMTT	OMAP_PALMTT		839
+ml696k			MACH_ML696K		ML696K			840
+arcom_zeus		MACH_ARCOM_ZEUS		ARCOM_ZEUS		841
+osiris			MACH_OSIRIS		OSIRIS			842
+maestro			MACH_MAESTRO		MAESTRO			843
+tunge2			MACH_TUNGE2		TUNGE2			844
+ixbbm			MACH_IXBBM		IXBBM			845
+mx27			MACH_MX27		MX27			846
+ax8004			MACH_AX8004		AX8004			847
+at91sam9261ek		MACH_AT91SAM9261EK	AT91SAM9261EK		848
+loft			MACH_LOFT		LOFT			849
+magpie			MACH_MAGPIE		MAGPIE			850
+mx21			MACH_MX21		MX21			851
+mb87m3400		MACH_MB87M3400		MB87M3400		852
+mguard_delta		MACH_MGUARD_DELTA	MGUARD_DELTA		853
+davinci_dvdp		MACH_DAVINCI_DVDP	DAVINCI_DVDP		854
+htcuniversal		MACH_HTCUNIVERSAL	HTCUNIVERSAL		855
+tpad			MACH_TPAD		TPAD			856
+roverp3			MACH_ROVERP3		ROVERP3			857

arch/cris/arch-v32/drivers/pci/dma.c

@@ -24,7 +24,7 @@ struct dma_coherent_mem {
 };
 
 void *dma_alloc_coherent(struct device *dev, size_t size,
-			   dma_addr_t *dma_handle, unsigned int __nocast gfp)
+			   dma_addr_t *dma_handle, gfp_t gfp)
 {
 	void *ret;
 	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;

arch/cris/arch-v32/kernel/smp.c

@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/cpumask.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 
 #define IPI_SCHEDULE 1
 #define IPI_CALL 2
@@ -28,6 +29,7 @@ spinlock_t cris_atomic_locks[] = { [0 ... LOCK_COUNT - 1] = SPIN_LOCK_UNLOCKED};
 /* CPU masks */
 cpumask_t cpu_online_map = CPU_MASK_NONE;
 cpumask_t phys_cpu_present_map = CPU_MASK_NONE;
+EXPORT_SYMBOL(phys_cpu_present_map);
 
 /* Variables used during SMP boot */
 volatile int cpu_now_booting = 0;

arch/i386/kernel/cpu/amd.c

@@ -29,7 +29,7 @@ static void __init init_amd(struct cpuinfo_x86 *c)
 	int r;
 
 #ifdef CONFIG_SMP
-	unsigned long value;
+	unsigned long long value;
 
 	/* Disable TLB flush filter by setting HWCR.FFDIS on K8
 	 * bit 6 of msr C001_0015

arch/i386/kernel/pci-dma.c

@@ -23,7 +23,7 @@ struct dma_coherent_mem {
 };
 
 void *dma_alloc_coherent(struct device *dev, size_t size,
-			   dma_addr_t *dma_handle, unsigned int __nocast gfp)
+			   dma_addr_t *dma_handle, gfp_t gfp)
 {
 	void *ret;
 	struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL;

arch/i386/kernel/signal.c

@@ -338,7 +338,11 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size)
 		esp = (unsigned long) ka->sa.sa_restorer;
 	}
 
-	return (void __user *)((esp - frame_size) & -8ul);
+	esp -= frame_size;
+	/* Align the stack pointer according to the i386 ABI,
+	 * i.e. so that on function entry ((sp + 4) & 15) == 0. */
+	esp = ((esp + 4) & -16ul) - 4;
+	return (void __user *) esp;
 }
 
 /* These symbols are defined with the addresses in the vsyscall page.

arch/ia64/kernel/mca.c

@@ -1016,6 +1016,11 @@ ia64_mca_cmc_int_handler(int cmc_irq, void *arg, struct pt_regs *ptregs)
 
 			cmc_polling_enabled = 1;
 			spin_unlock(&cmc_history_lock);
+			/* If we're being hit with CMC interrupts, we won't
+			 * ever execute the schedule_work() below.  Need to
+			 * disable CMC interrupts on this processor now.
+			 */
+			ia64_mca_cmc_vector_disable(NULL);
 			schedule_work(&cmc_disable_work);
 
 			/*

arch/m32r/kernel/entry.S

@@ -681,6 +681,15 @@ ENTRY(debug_trap)
 	bl	do_debug_trap
 	bra	error_code
 
+ENTRY(ill_trap)
+	/* void ill_trap(void) */
+	SWITCH_TO_KERNEL_STACK
+	SAVE_ALL
+	ldi	r1, #0				; error_code ; FIXME
+	mv	r0, sp				; pt_regs
+	bl	do_ill_trap
+	bra	error_code
+
 
 /* Cache flushing handler */
 ENTRY(cache_flushing_handler)

arch/m32r/kernel/traps.c

@@ -5,8 +5,6 @@
  *                            Hitoshi Yamamoto
  */
 
-/* $Id$ */
-
 /*
  * 'traps.c' handles hardware traps and faults after we have saved some
  * state in 'entry.S'.
@@ -35,6 +33,7 @@ asmlinkage void ei_handler(void);
 asmlinkage void rie_handler(void);
 asmlinkage void debug_trap(void);
 asmlinkage void cache_flushing_handler(void);
+asmlinkage void ill_trap(void);
 
 #ifdef CONFIG_SMP
 extern void smp_reschedule_interrupt(void);
@@ -77,22 +76,22 @@ void	set_eit_vector_entries(void)
 	eit_vector[5] = BRA_INSN(default_eit_handler, 5);
 	eit_vector[8] = BRA_INSN(rie_handler, 8);
 	eit_vector[12] = BRA_INSN(alignment_check, 12);
-	eit_vector[16] = 0xff000000UL;
+	eit_vector[16] = BRA_INSN(ill_trap, 16);
 	eit_vector[17] = BRA_INSN(debug_trap, 17);
 	eit_vector[18] = BRA_INSN(system_call, 18);
-	eit_vector[19] = 0xff000000UL;
-	eit_vector[20] = 0xff000000UL;
-	eit_vector[21] = 0xff000000UL;
-	eit_vector[22] = 0xff000000UL;
-	eit_vector[23] = 0xff000000UL;
-	eit_vector[24] = 0xff000000UL;
-	eit_vector[25] = 0xff000000UL;
-	eit_vector[26] = 0xff000000UL;
-	eit_vector[27] = 0xff000000UL;
+	eit_vector[19] = BRA_INSN(ill_trap, 19);
+	eit_vector[20] = BRA_INSN(ill_trap, 20);
+	eit_vector[21] = BRA_INSN(ill_trap, 21);
+	eit_vector[22] = BRA_INSN(ill_trap, 22);
+	eit_vector[23] = BRA_INSN(ill_trap, 23);
+	eit_vector[24] = BRA_INSN(ill_trap, 24);
+	eit_vector[25] = BRA_INSN(ill_trap, 25);
+	eit_vector[26] = BRA_INSN(ill_trap, 26);
+	eit_vector[27] = BRA_INSN(ill_trap, 27);
 	eit_vector[28] = BRA_INSN(cache_flushing_handler, 28);
-	eit_vector[29] = 0xff000000UL;
-	eit_vector[30] = 0xff000000UL;
-	eit_vector[31] = 0xff000000UL;
+	eit_vector[29] = BRA_INSN(ill_trap, 29);
+	eit_vector[30] = BRA_INSN(ill_trap, 30);
+	eit_vector[31] = BRA_INSN(ill_trap, 31);
 	eit_vector[32] = BRA_INSN(ei_handler, 32);
 	eit_vector[64] = BRA_INSN(pie_handler, 64);
 #ifdef CONFIG_MMU
@@ -286,7 +285,8 @@ asmlinkage void do_##name(struct pt_regs * regs, long error_code) \
 
 DO_ERROR( 1, SIGTRAP, "debug trap", debug_trap)
 DO_ERROR_INFO(0x20, SIGILL,  "reserved instruction ", rie_handler, ILL_ILLOPC, regs->bpc)
-DO_ERROR_INFO(0x100, SIGILL,  "privilege instruction", pie_handler, ILL_PRVOPC, regs->bpc)
+DO_ERROR_INFO(0x100, SIGILL,  "privileged instruction", pie_handler, ILL_PRVOPC, regs->bpc)
+DO_ERROR_INFO(-1, SIGILL,  "illegal trap", ill_trap, ILL_ILLTRP, regs->bpc)
 
 extern int handle_unaligned_access(unsigned long, struct pt_regs *);
 
@@ -329,4 +329,3 @@ asmlinkage void do_alignment_check(struct pt_regs *regs, long error_code)
 		set_fs(oldfs);
 	}
 }
-

arch/ppc/kernel/cputable.c

@@ -91,7 +91,7 @@ struct cpu_spec	cpu_specs[] = {
 		.cpu_features		= CPU_FTR_COMMON | CPU_FTR_601 |
 			CPU_FTR_HPTE_TABLE,
 		.cpu_user_features 	= COMMON_PPC | PPC_FEATURE_601_INSTR |
-			PPC_FEATURE_UNIFIED_CACHE,
+			PPC_FEATURE_UNIFIED_CACHE | PPC_FEATURE_NO_TB,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
 		.cpu_setup		= __setup_cpu_601
@@ -745,7 +745,8 @@ struct cpu_spec	cpu_specs[] = {
 		.cpu_name		= "403GCX",
 		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
 			CPU_FTR_USE_TB,
-		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
+		.cpu_user_features	= PPC_FEATURE_32 |
+		 	PPC_FEATURE_HAS_MMU | PPC_FEATURE_NO_TB,
 		.icache_bsize		= 16,
 		.dcache_bsize		= 16,
 	},

arch/ppc/kernel/dma-mapping.c

@@ -401,10 +401,10 @@ EXPORT_SYMBOL(__dma_sync);
 static inline void __dma_sync_page_highmem(struct page *page,
 		unsigned long offset, size_t size, int direction)
 {
-	size_t seg_size = min((size_t)PAGE_SIZE, size) - offset;
+	size_t seg_size = min((size_t)(PAGE_SIZE - offset), size);
 	size_t cur_size = seg_size;
 	unsigned long flags, start, seg_offset = offset;
-	int nr_segs = PAGE_ALIGN(size + (PAGE_SIZE - offset))/PAGE_SIZE;
+	int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE;
 	int seg_nr = 0;
 
 	local_irq_save(flags);

arch/ppc/platforms/pmac_time.c

@@ -195,7 +195,7 @@ via_calibrate_decr(void)
 		;
 	dend = get_dec();
 
-	tb_ticks_per_jiffy = (dstart - dend) / (6 * (HZ/100));
+	tb_ticks_per_jiffy = (dstart - dend) / ((6 * HZ)/100);
 	tb_to_us = mulhwu_scale_factor(dstart - dend, 60000);
 
 	printk(KERN_INFO "via_calibrate_decr: ticks per jiffy = %u (%u ticks)\n",

arch/ppc64/kernel/bpa_iommu.c

@@ -310,7 +310,7 @@ static void bpa_map_iommu(void)
 
 
 static void *bpa_alloc_coherent(struct device *hwdev, size_t size,
-			   dma_addr_t *dma_handle, unsigned int __nocast flag)
+			   dma_addr_t *dma_handle, gfp_t flag)
 {
 	void *ret;
 

arch/ppc64/kernel/dma.c

@@ -53,7 +53,7 @@ int dma_set_mask(struct device *dev, u64 dma_mask)
 EXPORT_SYMBOL(dma_set_mask);
 
 void *dma_alloc_coherent(struct device *dev, size_t size,
-		dma_addr_t *dma_handle, unsigned int __nocast flag)
+		dma_addr_t *dma_handle, gfp_t flag)
 {
 	struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
 

arch/ppc64/kernel/iommu.c

@@ -519,7 +519,7 @@ void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle,
  * to the dma address (mapping) of the first page.
  */
 void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size,
-		dma_addr_t *dma_handle, unsigned int __nocast flag)
+		dma_addr_t *dma_handle, gfp_t flag)
 {
 	void *ret = NULL;
 	dma_addr_t mapping;

arch/ppc64/kernel/module.c

@@ -341,6 +341,19 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 			*(unsigned long *)location = my_r2(sechdrs, me);
 			break;
 
+		case R_PPC64_TOC16:
+			/* Subtact TOC pointer */
+			value -= my_r2(sechdrs, me);
+			if (value + 0x8000 > 0xffff) {
+				printk("%s: bad TOC16 relocation (%lu)\n",
+				       me->name, value);
+				return -ENOEXEC;
+			}
+			*((uint16_t *) location)
+				= (*((uint16_t *) location) & ~0xffff)
+				| (value & 0xffff);
+			break;
+
 		case R_PPC64_TOC16_DS:
 			/* Subtact TOC pointer */
 			value -= my_r2(sechdrs, me);

arch/ppc64/kernel/pSeries_pci.c

@@ -32,7 +32,7 @@
 
 #include "pci.h"
 
-static int __initdata s7a_workaround = -1;
+static int __devinitdata s7a_workaround = -1;
 
 #if 0
 void pcibios_name_device(struct pci_dev *dev)
@@ -60,7 +60,7 @@ void pcibios_name_device(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_name_device);
 #endif
 
-static void __init check_s7a(void)
+static void __devinit check_s7a(void)
 {
 	struct device_node *root;
 	char *model;

arch/ppc64/kernel/pci_direct_iommu.c

@@ -31,7 +31,7 @@
 #include "pci.h"
 
 static void *pci_direct_alloc_coherent(struct device *hwdev, size_t size,
-				   dma_addr_t *dma_handle, unsigned int __nocast flag)
+				   dma_addr_t *dma_handle, gfp_t flag)
 {
 	void *ret;
 

arch/ppc64/kernel/pci_iommu.c

@@ -76,7 +76,7 @@ static inline struct iommu_table *devnode_table(struct device *dev)
  * to the dma address (mapping) of the first page.
  */
 static void *pci_iommu_alloc_coherent(struct device *hwdev, size_t size,
-			   dma_addr_t *dma_handle, unsigned int __nocast flag)
+			   dma_addr_t *dma_handle, gfp_t flag)
 {
 	return iommu_alloc_coherent(devnode_table(hwdev), size, dma_handle,
 			flag);

arch/ppc64/kernel/vio.c

@@ -218,7 +218,7 @@ static void vio_unmap_sg(struct device *dev, struct scatterlist *sglist,
 }
 
 static void *vio_alloc_coherent(struct device *dev, size_t size,
-			   dma_addr_t *dma_handle, unsigned int __nocast flag)
+			   dma_addr_t *dma_handle, gfp_t flag)
 {
 	return iommu_alloc_coherent(to_vio_dev(dev)->iommu_table, size,
 			dma_handle, flag);

arch/sh/kernel/smp.c

@@ -22,6 +22,7 @@
 #include <linux/time.h>
 #include <linux/timex.h>
 #include <linux/sched.h>
+#include <linux/module.h>
 
 #include <asm/atomic.h>
 #include <asm/processor.h>
@@ -39,6 +40,8 @@ struct sh_cpuinfo cpu_data[NR_CPUS];
 extern void per_cpu_trap_init(void);
 
 cpumask_t cpu_possible_map;
+EXPORT_SYMBOL(cpu_possible_map);
+
 cpumask_t cpu_online_map;
 static atomic_t cpus_booted = ATOMIC_INIT(0);
 

arch/sparc/Kconfig

@@ -25,62 +25,6 @@ source "init/Kconfig"
 
 menu "General machine setup"
 
-config VT
-	bool
-	select INPUT
-	default y
-	---help---
-	  If you say Y here, you will get support for terminal devices with
-	  display and keyboard devices. These are called "virtual" because you
-	  can run several virtual terminals (also called virtual consoles) on
-	  one physical terminal. This is rather useful, for example one
-	  virtual terminal can collect system messages and warnings, another
-	  one can be used for a text-mode user session, and a third could run
-	  an X session, all in parallel. Switching between virtual terminals
-	  is done with certain key combinations, usually Alt-<function key>.
-
-	  The setterm command ("man setterm") can be used to change the
-	  properties (such as colors or beeping) of a virtual terminal. The
-	  man page console_codes(4) ("man console_codes") contains the special
-	  character sequences that can be used to change those properties
-	  directly. The fonts used on virtual terminals can be changed with
-	  the setfont ("man setfont") command and the key bindings are defined
-	  with the loadkeys ("man loadkeys") command.
-
-	  You need at least one virtual terminal device in order to make use
-	  of your keyboard and monitor. Therefore, only people configuring an
-	  embedded system would want to say N here in order to save some
-	  memory; the only way to log into such a system is then via a serial
-	  or network connection.
-
-	  If unsure, say Y, or else you won't be able to do much with your new
-	  shiny Linux system :-)
-
-config VT_CONSOLE
-	bool
-	default y
-	---help---
-	  The system console is the device which receives all kernel messages
-	  and warnings and which allows logins in single user mode. If you
-	  answer Y here, a virtual terminal (the device used to interact with
-	  a physical terminal) can be used as system console. This is the most
-	  common mode of operations, so you should say Y here unless you want
-	  the kernel messages be output only to a serial port (in which case
-	  you should say Y to "Console on serial port", below).
-
-	  If you do say Y here, by default the currently visible virtual
-	  terminal (/dev/tty0) will be used as system console. You can change
-	  that with a kernel command line option such as "console=tty3" which
-	  would use the third virtual terminal as system console. (Try "man
-	  bootparam" or see the documentation of your boot loader (lilo or
-	  loadlin) about how to pass options to the kernel at boot time.)
-
-	  If unsure, say Y.
-
-config HW_CONSOLE
-	bool
-	default y
-
 config SMP
 	bool "Symmetric multi-processing support (does not work on sun4/sun4c)"
 	depends on BROKEN

arch/sparc64/kernel/dtlb_base.S

@@ -53,19 +53,18 @@
  * be guaranteed to be 0 ... mmu_context.h does guarantee this
  * by only using 10 bits in the hwcontext value.
  */
-#define CREATE_VPTE_OFFSET1(r1, r2)
+#define CREATE_VPTE_OFFSET1(r1, r2) nop
 #define CREATE_VPTE_OFFSET2(r1, r2) \
 				srax	r1, 10, r2
-#define CREATE_VPTE_NOP		nop
 #else
 #define CREATE_VPTE_OFFSET1(r1, r2) \
 				srax	r1, PAGE_SHIFT, r2
 #define CREATE_VPTE_OFFSET2(r1, r2) \
 				sllx	r2, 3, r2
-#define CREATE_VPTE_NOP
 #endif
 
 /* DTLB ** ICACHE line 1: Quick user TLB misses		*/
+	mov		TLB_SFSR, %g1
 	ldxa		[%g1 + %g1] ASI_DMMU, %g4	! Get TAG_ACCESS
 	andcc		%g4, TAG_CONTEXT_BITS, %g0	! From Nucleus?
 from_tl1_trap:
@@ -74,18 +73,16 @@ from_tl1_trap:
 	be,pn		%xcc, kvmap			! Yep, special processing
 	 CREATE_VPTE_OFFSET2(%g4, %g6)			! Create VPTE offset
 	cmp		%g5, 4				! Last trap level?
-	be,pn		%xcc, longpath			! Yep, cannot risk VPTE miss
-	 nop						! delay slot
 
 /* DTLB ** ICACHE line 2: User finish + quick kernel TLB misses	*/
+	be,pn		%xcc, longpath			! Yep, cannot risk VPTE miss
+	 nop						! delay slot
 	ldxa		[%g3 + %g6] ASI_S, %g5		! Load VPTE
 1:	brgez,pn	%g5, longpath			! Invalid, branch out
 	 nop						! Delay-slot
 9:	stxa		%g5, [%g0] ASI_DTLB_DATA_IN	! Reload TLB
 	retry						! Trap return
 	nop
-	nop
-	nop
 
 /* DTLB ** ICACHE line 3: winfixups+real_faults		*/
 longpath:
@@ -106,8 +103,7 @@ longpath:
 	nop
 	nop
 	nop
-	CREATE_VPTE_NOP
+	nop
 
 #undef CREATE_VPTE_OFFSET1
 #undef CREATE_VPTE_OFFSET2
-#undef CREATE_VPTE_NOP

arch/sparc64/kernel/dtlb_prot.S

@@ -14,14 +14,14 @@
  */
 
 /* PROT ** ICACHE line 1: User DTLB protection trap	*/
-	stxa		%g0, [%g1] ASI_DMMU		! Clear SFSR FaultValid bit
-	membar		#Sync				! Synchronize ASI stores
-	rdpr		%pstate, %g5			! Move into alternate globals
+	mov		TLB_SFSR, %g1
+	stxa		%g0, [%g1] ASI_DMMU		! Clear FaultValid bit
+	membar		#Sync				! Synchronize stores
+	rdpr		%pstate, %g5			! Move into alt-globals
 	wrpr		%g5, PSTATE_AG|PSTATE_MG, %pstate
-	rdpr		%tl, %g1			! Need to do a winfixup?
+	rdpr		%tl, %g1			! Need a winfixup?
 	cmp		%g1, 1				! Trap level >1?
-	mov		TLB_TAG_ACCESS, %g4		! Prepare reload of vaddr
-	nop
+	mov		TLB_TAG_ACCESS, %g4		! For reload of vaddr
 
 /* PROT ** ICACHE line 2: More real fault processing */
 	bgu,pn		%xcc, winfix_trampoline		! Yes, perform winfixup

arch/sparc64/kernel/entry.S

@@ -33,7 +33,7 @@
 	/* This is trivial with the new code... */
 	.globl		do_fpdis
 do_fpdis:
-	sethi		%hi(TSTATE_PEF), %g4					! IEU0
+	sethi		%hi(TSTATE_PEF), %g4
 	rdpr		%tstate, %g5
 	andcc		%g5, %g4, %g0
 	be,pt		%xcc, 1f
@@ -50,18 +50,18 @@ do_fpdis:
 	add		%g0, %g0, %g0
 	ba,a,pt		%xcc, rtrap_clr_l6
 
-1:	ldub		[%g6 + TI_FPSAVED], %g5					! Load	Group
-	wr		%g0, FPRS_FEF, %fprs					! LSU	Group+4bubbles
-	andcc		%g5, FPRS_FEF, %g0					! IEU1	Group
-	be,a,pt		%icc, 1f						! CTI
-	 clr		%g7							! IEU0
-	ldx		[%g6 + TI_GSR], %g7					! Load	Group
-1:	andcc		%g5, FPRS_DL, %g0					! IEU1
-	bne,pn		%icc, 2f						! CTI
-	 fzero		%f0							! FPA
-	andcc		%g5, FPRS_DU, %g0					! IEU1  Group
-	bne,pn		%icc, 1f						! CTI
-	 fzero		%f2							! FPA
+1:	ldub		[%g6 + TI_FPSAVED], %g5
+	wr		%g0, FPRS_FEF, %fprs
+	andcc		%g5, FPRS_FEF, %g0
+	be,a,pt		%icc, 1f
+	 clr		%g7
+	ldx		[%g6 + TI_GSR], %g7
+1:	andcc		%g5, FPRS_DL, %g0
+	bne,pn		%icc, 2f
+	 fzero		%f0
+	andcc		%g5, FPRS_DU, %g0
+	bne,pn		%icc, 1f
+	 fzero		%f2
 	faddd		%f0, %f2, %f4
 	fmuld		%f0, %f2, %f6
 	faddd		%f0, %f2, %f8
@@ -97,15 +97,17 @@ do_fpdis:
 	faddd		%f0, %f2, %f4
 	fmuld		%f0, %f2, %f6
 	ldxa		[%g3] ASI_DMMU, %g5
-cplus_fptrap_insn_1:
-	sethi		%hi(0), %g2
+	sethi		%hi(sparc64_kern_sec_context), %g2
+	ldx		[%g2 + %lo(sparc64_kern_sec_context)], %g2
 	stxa		%g2, [%g3] ASI_DMMU
 	membar		#Sync
 	add		%g6, TI_FPREGS + 0xc0, %g2
 	faddd		%f0, %f2, %f8
 	fmuld		%f0, %f2, %f10
-	ldda		[%g1] ASI_BLK_S, %f32	! grrr, where is ASI_BLK_NUCLEUS 8-(
+	membar		#Sync
+	ldda		[%g1] ASI_BLK_S, %f32
 	ldda		[%g2] ASI_BLK_S, %f48
+	membar		#Sync
 	faddd		%f0, %f2, %f12
 	fmuld		%f0, %f2, %f14
 	faddd		%f0, %f2, %f16
@@ -116,7 +118,6 @@ cplus_fptrap_insn_1:
 	fmuld		%f0, %f2, %f26
 	faddd		%f0, %f2, %f28
 	fmuld		%f0, %f2, %f30
-	membar		#Sync
 	b,pt		%xcc, fpdis_exit
 	 nop
 2:	andcc		%g5, FPRS_DU, %g0
@@ -126,15 +127,17 @@ cplus_fptrap_insn_1:
 	fzero		%f34
 	ldxa		[%g3] ASI_DMMU, %g5
 	add		%g6, TI_FPREGS, %g1
-cplus_fptrap_insn_2:
-	sethi		%hi(0), %g2
+	sethi		%hi(sparc64_kern_sec_context), %g2
+	ldx		[%g2 + %lo(sparc64_kern_sec_context)], %g2
 	stxa		%g2, [%g3] ASI_DMMU
 	membar		#Sync
 	add		%g6, TI_FPREGS + 0x40, %g2
 	faddd		%f32, %f34, %f36
 	fmuld		%f32, %f34, %f38
-	ldda		[%g1] ASI_BLK_S, %f0	! grrr, where is ASI_BLK_NUCLEUS 8-(
+	membar		#Sync
+	ldda		[%g1] ASI_BLK_S, %f0
 	ldda		[%g2] ASI_BLK_S, %f16
+	membar		#Sync
 	faddd		%f32, %f34, %f40
 	fmuld		%f32, %f34, %f42
 	faddd		%f32, %f34, %f44
@@ -147,18 +150,18 @@ cplus_fptrap_insn_2:
 	fmuld		%f32, %f34, %f58
 	faddd		%f32, %f34, %f60
 	fmuld		%f32, %f34, %f62
-	membar		#Sync
 	ba,pt		%xcc, fpdis_exit
 	 nop
 3:	mov		SECONDARY_CONTEXT, %g3
 	add		%g6, TI_FPREGS, %g1
 	ldxa		[%g3] ASI_DMMU, %g5
-cplus_fptrap_insn_3:
-	sethi		%hi(0), %g2
+	sethi		%hi(sparc64_kern_sec_context), %g2
+	ldx		[%g2 + %lo(sparc64_kern_sec_context)], %g2
 	stxa		%g2, [%g3] ASI_DMMU
 	membar		#Sync
 	mov		0x40, %g2
-	ldda		[%g1] ASI_BLK_S, %f0		! grrr, where is ASI_BLK_NUCLEUS 8-(
+	membar		#Sync
+	ldda		[%g1] ASI_BLK_S, %f0
 	ldda		[%g1 + %g2] ASI_BLK_S, %f16
 	add		%g1, 0x80, %g1
 	ldda		[%g1] ASI_BLK_S, %f32
@@ -319,8 +322,8 @@ do_fptrap_after_fsr:
 	stx		%g3, [%g6 + TI_GSR]
 	mov		SECONDARY_CONTEXT, %g3
 	ldxa		[%g3] ASI_DMMU, %g5
-cplus_fptrap_insn_4:
-	sethi		%hi(0), %g2
+	sethi		%hi(sparc64_kern_sec_context), %g2
+	ldx		[%g2 + %lo(sparc64_kern_sec_context)], %g2
 	stxa		%g2, [%g3] ASI_DMMU
 	membar		#Sync
 	add		%g6, TI_FPREGS, %g2
@@ -341,33 +344,6 @@ cplus_fptrap_insn_4:
 	ba,pt		%xcc, etrap
 	 wr		%g0, 0, %fprs
 
-cplus_fptrap_1:
-	sethi		%hi(CTX_CHEETAH_PLUS_CTX0), %g2
-
-	.globl		cheetah_plus_patch_fpdis
-cheetah_plus_patch_fpdis:
-	/* We configure the dTLB512_0 for 4MB pages and the
-	 * dTLB512_1 for 8K pages when in context zero.
-	 */
-	sethi			%hi(cplus_fptrap_1), %o0
-	lduw			[%o0 + %lo(cplus_fptrap_1)], %o1
-
-	set			cplus_fptrap_insn_1, %o2
-	stw			%o1, [%o2]
-	flush			%o2
-	set			cplus_fptrap_insn_2, %o2
-	stw			%o1, [%o2]
-	flush			%o2
-	set			cplus_fptrap_insn_3, %o2
-	stw			%o1, [%o2]
-	flush			%o2
-	set			cplus_fptrap_insn_4, %o2
-	stw			%o1, [%o2]
-	flush			%o2
-
-	retl
-	 nop
-
 	/* The registers for cross calls will be:
 	 *
 	 * DATA 0: [low 32-bits]  Address of function to call, jmp to this

arch/sparc64/kernel/etrap.S

@@ -68,12 +68,8 @@ etrap_irq:
 
 		wrpr	%g3, 0, %otherwin
 		wrpr	%g2, 0, %wstate
-cplus_etrap_insn_1:
-		sethi	%hi(0), %g3
-		sllx	%g3, 32, %g3
-cplus_etrap_insn_2:
-		sethi	%hi(0), %g2
-		or	%g3, %g2, %g3
+		sethi	%hi(sparc64_kern_pri_context), %g2
+		ldx	[%g2 + %lo(sparc64_kern_pri_context)], %g3
 		stxa	%g3, [%l4] ASI_DMMU
 		flush	%l6
 		wr	%g0, ASI_AIUS, %asi
@@ -215,12 +211,8 @@ scetrap:	rdpr	%pil, %g2
 		mov	PRIMARY_CONTEXT, %l4
 		wrpr	%g3, 0, %otherwin
 		wrpr	%g2, 0, %wstate
-cplus_etrap_insn_3:
-		sethi	%hi(0), %g3
-		sllx	%g3, 32, %g3
-cplus_etrap_insn_4:
-		sethi	%hi(0), %g2
-		or	%g3, %g2, %g3
+		sethi	%hi(sparc64_kern_pri_context), %g2
+		ldx	[%g2 + %lo(sparc64_kern_pri_context)], %g3
 		stxa	%g3, [%l4] ASI_DMMU
 		flush	%l6
 
@@ -264,38 +256,3 @@ cplus_etrap_insn_4:
 
 #undef TASK_REGOFF
 #undef ETRAP_PSTATE1
-
-cplus_einsn_1:
-		sethi			%uhi(CTX_CHEETAH_PLUS_NUC), %g3
-cplus_einsn_2:
-		sethi			%hi(CTX_CHEETAH_PLUS_CTX0), %g2
-
-		.globl			cheetah_plus_patch_etrap
-cheetah_plus_patch_etrap:
-		/* We configure the dTLB512_0 for 4MB pages and the
-		 * dTLB512_1 for 8K pages when in context zero.
-		 */
-		sethi			%hi(cplus_einsn_1), %o0
-		sethi			%hi(cplus_etrap_insn_1), %o2
-		lduw			[%o0 + %lo(cplus_einsn_1)], %o1
-		or			%o2, %lo(cplus_etrap_insn_1), %o2
-		stw			%o1, [%o2]
-		flush			%o2
-		sethi			%hi(cplus_etrap_insn_3), %o2
-		or			%o2, %lo(cplus_etrap_insn_3), %o2
-		stw			%o1, [%o2]
-		flush			%o2
-
-		sethi			%hi(cplus_einsn_2), %o0
-		sethi			%hi(cplus_etrap_insn_2), %o2
-		lduw			[%o0 + %lo(cplus_einsn_2)], %o1
-		or			%o2, %lo(cplus_etrap_insn_2), %o2
-		stw			%o1, [%o2]
-		flush			%o2
-		sethi			%hi(cplus_etrap_insn_4), %o2
-		or			%o2, %lo(cplus_etrap_insn_4), %o2
-		stw			%o1, [%o2]
-		flush			%o2
-
-		retl
-		 nop

arch/sparc64/kernel/irq.c

@@ -27,6 +27,7 @@
 #include <asm/atomic.h>
 #include <asm/system.h>
 #include <asm/irq.h>
+#include <asm/io.h>
 #include <asm/sbus.h>
 #include <asm/iommu.h>
 #include <asm/upa.h>

arch/sparc64/kernel/itlb_base.S

@@ -15,14 +15,12 @@
  */
 #define CREATE_VPTE_OFFSET1(r1, r2) \
 				srax	r1, 10, r2
-#define CREATE_VPTE_OFFSET2(r1, r2)
-#define CREATE_VPTE_NOP		nop
+#define CREATE_VPTE_OFFSET2(r1, r2) nop
 #else /* PAGE_SHIFT */
 #define CREATE_VPTE_OFFSET1(r1, r2) \
 				srax	r1, PAGE_SHIFT, r2
 #define CREATE_VPTE_OFFSET2(r1, r2) \
 				sllx	r2, 3, r2
-#define CREATE_VPTE_NOP
 #endif /* PAGE_SHIFT */
 
 
@@ -36,6 +34,7 @@
  */
 
 /* ITLB ** ICACHE line 1: Quick user TLB misses		*/
+	mov		TLB_SFSR, %g1
 	ldxa		[%g1 + %g1] ASI_IMMU, %g4	! Get TAG_ACCESS
 	CREATE_VPTE_OFFSET1(%g4, %g6)			! Create VPTE offset
 	CREATE_VPTE_OFFSET2(%g4, %g6)			! Create VPTE offset
@@ -43,41 +42,38 @@
 1:	brgez,pn	%g5, 3f				! Not valid, branch out
 	 sethi		%hi(_PAGE_EXEC), %g4		! Delay-slot
 	andcc		%g5, %g4, %g0			! Executable?
+
+/* ITLB ** ICACHE line 2: Real faults			*/
 	be,pn		%xcc, 3f			! Nope, branch.
 	 nop						! Delay-slot
 2:	stxa		%g5, [%g0] ASI_ITLB_DATA_IN	! Load PTE into TLB
 	retry						! Trap return
-3:	rdpr		%pstate, %g4			! Move into alternate globals
-
-/* ITLB ** ICACHE line 2: Real faults			*/
+3:	rdpr		%pstate, %g4			! Move into alt-globals
 	wrpr		%g4, PSTATE_AG|PSTATE_MG, %pstate
 	rdpr		%tpc, %g5			! And load faulting VA
 	mov		FAULT_CODE_ITLB, %g4		! It was read from ITLB
-sparc64_realfault_common:				! Called by TL0 dtlb_miss too
+
+/* ITLB ** ICACHE line 3: Finish faults	*/
+sparc64_realfault_common:				! Called by dtlb_miss
 	stb		%g4, [%g6 + TI_FAULT_CODE]
 	stx		%g5, [%g6 + TI_FAULT_ADDR]
 	ba,pt		%xcc, etrap			! Save state
 1:	 rd		%pc, %g7			! ...
-	nop
-
-/* ITLB ** ICACHE line 3: Finish faults + window fixups	*/
 	call		do_sparc64_fault		! Call fault handler
 	 add		%sp, PTREGS_OFF, %o0! Compute pt_regs arg
 	ba,pt		%xcc, rtrap_clr_l6		! Restore cpu state
 	 nop
+
+/* ITLB ** ICACHE line 4: Window fixups */
 winfix_trampoline:
 	rdpr		%tpc, %g3			! Prepare winfixup TNPC
-	or		%g3, 0x7c, %g3			! Compute offset to branch
+	or		%g3, 0x7c, %g3			! Compute branch offset
 	wrpr		%g3, %tnpc			! Write it into TNPC
 	done						! Do it to it
-
-/* ITLB ** ICACHE line 4: Unused...	*/
 	nop
 	nop
 	nop
 	nop
-	CREATE_VPTE_NOP
 
 #undef CREATE_VPTE_OFFSET1
 #undef CREATE_VPTE_OFFSET2
-#undef CREATE_VPTE_NOP

arch/sparc64/kernel/setup.c

@@ -187,17 +187,13 @@ int prom_callback(long *args)
 		}
 
 		if ((va >= KERNBASE) && (va < (KERNBASE + (4 * 1024 * 1024)))) {
-			unsigned long kernel_pctx = 0;
-
-			if (tlb_type == cheetah_plus)
-				kernel_pctx |= (CTX_CHEETAH_PLUS_NUC |
-						CTX_CHEETAH_PLUS_CTX0);
+			extern unsigned long sparc64_kern_pri_context;
 
 			/* Spitfire Errata #32 workaround */
 			__asm__ __volatile__("stxa	%0, [%1] %2\n\t"
 					     "flush	%%g6"
 					     : /* No outputs */
-					     : "r" (kernel_pctx),
+					     : "r" (sparc64_kern_pri_context),
 					       "r" (PRIMARY_CONTEXT),
 					       "i" (ASI_DMMU));
 

arch/um/Makefile

@@ -152,7 +152,7 @@ archclean:
 $(SYMLINK_HEADERS):
 	@echo '  SYMLINK $@'
 ifneq ($(KBUILD_SRC),)
-	ln -fsn $(srctree)/include/asm-um/$(basename $(notdir $@))-$(SUBARCH)$(suffix $@) $@
+	$(Q)ln -fsn $(srctree)/include/asm-um/$(basename $(notdir $@))-$(SUBARCH)$(suffix $@) $@
 else
 	$(Q)cd $(TOPDIR)/$(dir $@) ; \
 	ln -sf $(basename $(notdir $@))-$(SUBARCH)$(suffix $@) $(notdir $@)