x86/32: Remove CONFIG_DOUBLEFAULT

Make the doublefault exception handler unconditional on 32-bit. Yes,
it is important to be able to catch #DF exceptions instead of silent
reboots. Yes, the code size increase is worth every byte. And one less
CONFIG symbol is just the cherry on top.

No functional changes.
Signed-off-by: NBorislav Petkov <bp@suse.de>
Acked-by: NAndy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200404083646.8897-1-bp@alien8.de

arch/x86/Kconfig.debug

@@ -99,15 +99,6 @@ config DEBUG_WX
 
 	  If in doubt, say "Y".
 
-config DOUBLEFAULT
-	default y
-	bool "Enable doublefault exception handler" if EXPERT && X86_32
-	---help---
-	  This option allows trapping of rare doublefault exceptions that
-	  would otherwise cause a system to silently reboot. Disabling this
-	  option saves about 4k and might cause you much additional grey
-	  hair.
-
 config DEBUG_TLBFLUSH
 	bool "Set upper limit of TLB entries to flush one-by-one"
 	depends on DEBUG_KERNEL

arch/x86/entry/entry_32.S

@@ -1536,7 +1536,6 @@ SYM_CODE_START(debug)
 	jmp	common_exception
 SYM_CODE_END(debug)
 
-#ifdef CONFIG_DOUBLEFAULT
 SYM_CODE_START(double_fault)
 1:
 	/*
@@ -1576,7 +1575,6 @@ SYM_CODE_START(double_fault)
 	hlt
 	jmp 1b
 SYM_CODE_END(double_fault)
-#endif
 
 /*
  * NMI is doubly nasty.  It can happen on the first instruction of

arch/x86/include/asm/doublefault.h

@@ -2,7 +2,7 @@
 #ifndef _ASM_X86_DOUBLEFAULT_H
 #define _ASM_X86_DOUBLEFAULT_H
 
-#if defined(CONFIG_X86_32) && defined(CONFIG_DOUBLEFAULT)
+#ifdef CONFIG_X86_32
 extern void doublefault_init_cpu_tss(void);
 #else
 static inline void doublefault_init_cpu_tss(void)

arch/x86/include/asm/traps.h

@@ -69,9 +69,7 @@ dotraplinkage void do_overflow(struct pt_regs *regs, long error_code);
 dotraplinkage void do_bounds(struct pt_regs *regs, long error_code);
 dotraplinkage void do_invalid_op(struct pt_regs *regs, long error_code);
 dotraplinkage void do_device_not_available(struct pt_regs *regs, long error_code);
-#if defined(CONFIG_X86_64) || defined(CONFIG_DOUBLEFAULT)
 dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code, unsigned long cr2);
-#endif
 dotraplinkage void do_coprocessor_segment_overrun(struct pt_regs *regs, long error_code);
 dotraplinkage void do_invalid_TSS(struct pt_regs *regs, long error_code);
 dotraplinkage void do_segment_not_present(struct pt_regs *regs, long error_code);

arch/x86/kernel/Makefile

@@ -102,9 +102,7 @@ obj-$(CONFIG_KEXEC_FILE)	+= kexec-bzimage64.o
 obj-$(CONFIG_CRASH_DUMP)	+= crash_dump_$(BITS).o
 obj-y				+= kprobes/
 obj-$(CONFIG_MODULES)		+= module.o
-ifeq ($(CONFIG_X86_32),y)
-obj-$(CONFIG_DOUBLEFAULT)	+= doublefault_32.o
-endif
+obj-$(CONFIG_X86_32)		+= doublefault_32.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_VM86)		+= vm86_32.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o

arch/x86/kernel/dumpstack_32.c

@@ -87,7 +87,6 @@ static bool in_softirq_stack(unsigned long *stack, struct stack_info *info)
 
 static bool in_doublefault_stack(unsigned long *stack, struct stack_info *info)
 {
-#ifdef CONFIG_DOUBLEFAULT
 	struct cpu_entry_area *cea = get_cpu_entry_area(raw_smp_processor_id());
 	struct doublefault_stack *ss = &cea->doublefault_stack;
 
@@ -103,9 +102,6 @@ static bool in_doublefault_stack(unsigned long *stack, struct stack_info *info)
 	info->next_sp	= (unsigned long *)this_cpu_read(cpu_tss_rw.x86_tss.sp);
 
 	return true;
-#else
-	return false;
-#endif
 }
 
 

arch/x86/kernel/traps.c

@@ -326,7 +326,6 @@ __visible void __noreturn handle_stack_overflow(const char *message,
 }
 #endif
 
-#if defined(CONFIG_X86_64) || defined(CONFIG_DOUBLEFAULT)
 /*
  * Runs on an IST stack for x86_64 and on a special task stack for x86_32.
  *
@@ -450,7 +449,6 @@ dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code, unsign
 	die("double fault", regs, error_code);
 	panic("Machine halted.");
 }
-#endif
 
 dotraplinkage void do_bounds(struct pt_regs *regs, long error_code)
 {

arch/x86/mm/cpu_entry_area.c

@@ -17,7 +17,7 @@ static DEFINE_PER_CPU_PAGE_ALIGNED(struct exception_stacks, exception_stacks);
 DEFINE_PER_CPU(struct cea_exception_stacks*, cea_exception_stacks);
 #endif
 
-#if defined(CONFIG_X86_32) && defined(CONFIG_DOUBLEFAULT)
+#ifdef CONFIG_X86_32
 DECLARE_PER_CPU_PAGE_ALIGNED(struct doublefault_stack, doublefault_stack);
 #endif
 
@@ -114,12 +114,10 @@ static void __init percpu_setup_exception_stacks(unsigned int cpu)
 #else
 static inline void percpu_setup_exception_stacks(unsigned int cpu)
 {
-#ifdef CONFIG_DOUBLEFAULT
 	struct cpu_entry_area *cea = get_cpu_entry_area(cpu);
 
 	cea_map_percpu_pages(&cea->doublefault_stack,
 			     &per_cpu(doublefault_stack, cpu), 1, PAGE_KERNEL);
-#endif
 }
 #endif
 

tools/testing/selftests/wireguard/qemu/debug.config

@@ -58,7 +58,6 @@ CONFIG_RCU_EQS_DEBUG=y
 CONFIG_USER_STACKTRACE_SUPPORT=y
 CONFIG_DEBUG_SG=y
 CONFIG_DEBUG_NOTIFIERS=y
-CONFIG_DOUBLEFAULT=y
 CONFIG_X86_DEBUG_FPU=y
 CONFIG_DEBUG_SECTION_MISMATCH=y
 CONFIG_DEBUG_PAGEALLOC=y