提交 586b0cab 编写于 作者: M Mauro Carvalho Chehab 提交者: Linus Torvalds

[PATCH] v4l: tuner improvements

*tuner-core.c:
- some tuner_info msgs will be generated only if insmod opt
        tuner_debug enabled.
- Implemented tuner-core support for VIDIO_S_TUNER to allow
        changing mono/stereo mode
- Remove unneeded config options.
- I2C_CLIENT_MULTI option removed.
- support for Philips FMD12ME hybrid tuner
- allow to initialize with another tuner
- Move PHILIPS_FMD initialization code to set_type function,

* tda8290:

- Fix dumb error in tda8290 tunning.
- Radio tuner uses high-precision step instead of 62.5 KHz.

*tea5767.c:
- tuner_info msgs will be generated only if insmod tuner option
        tuner_debug enabled.
- some cleanups for better reading.
- Radio tuner uses high-precision step instead of 62.5 KHz.
- Changing radio mode stereo/mono for tea5767 working.

*tuner-simple.c:
- TNF9533-D/IF UHF fixup.
- Radio tuners now uses high-precision step instead of 62.5 KHz.

*mt20xx.c:
        - Radio tuner uses high-precision step instead of 62.5 KHz.

*tda9887.c:
        - tab and blank spaces corrections.
Signed-off-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NGerd Knorr <kraxel@bytesex.org>
Signed-off-by: NNickolay V Shmyrev <nshmyrev@yandex.ru>
Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 96b6aba0
......@@ -7,8 +7,7 @@ bttv-objs := bttv-driver.o bttv-cards.o bttv-if.o \
zoran-objs := zr36120.o zr36120_i2c.o zr36120_mem.o
zr36067-objs := zoran_procfs.o zoran_device.o \
zoran_driver.o zoran_card.o
tuner-objs := tuner-core.o tuner-simple.o mt20xx.o tda8290.o
tuner-objs := tuner-core.o tuner-simple.o mt20xx.o tda8290.o tea5767.o
obj-$(CONFIG_VIDEO_DEV) += videodev.o v4l2-common.o v4l1-compat.o
obj-$(CONFIG_VIDEO_BT848) += bttv.o msp3400.o tvaudio.o \
......
/*
* $Id: mt20xx.c,v 1.4 2005/03/04 09:24:56 kraxel Exp $
* $Id: mt20xx.c,v 1.5 2005/06/16 08:29:49 nsh Exp $
*
* i2c tv tuner chip device driver
* controls microtune tuners, mt2032 + mt2050 at the moment.
......@@ -295,8 +295,8 @@ static void mt2032_set_radio_freq(struct i2c_client *c, unsigned int freq)
int if2 = t->radio_if2;
// per Manual for FM tuning: first if center freq. 1085 MHz
mt2032_set_if_freq(c, freq*62500 /* freq*1000*1000/16 */,
1085*1000*1000,if2,if2,if2);
mt2032_set_if_freq(c, freq * 1000 / 16,
1085*1000*1000,if2,if2,if2);
}
// Initalization as described in "MT203x Programming Procedures", Rev 1.2, Feb.2001
......
/*
* $Id: tda8290.c,v 1.7 2005/03/07 12:01:51 kraxel Exp $
* $Id: tda8290.c,v 1.11 2005/06/18 06:09:06 nsh Exp $
*
* i2c tv tuner chip device driver
* controls the philips tda8290+75 tuner chip combo.
......@@ -69,7 +69,7 @@ static __u8 get_freq_entry( struct freq_entry* table, __u16 freq)
static unsigned char i2c_enable_bridge[2] = { 0x21, 0xC0 };
static unsigned char i2c_disable_bridge[2] = { 0x21, 0x80 };
static unsigned char i2c_init_tda8275[14] = { 0x00, 0x00, 0x00, 0x00,
0x7C, 0x04, 0xA3, 0x3F,
0xfC, 0x04, 0xA3, 0x3F,
0x2A, 0x04, 0xFF, 0x00,
0x00, 0x40 };
static unsigned char i2c_set_VS[2] = { 0x30, 0x6F };
......@@ -138,16 +138,24 @@ static int tda8290_tune(struct i2c_client *c)
static void set_frequency(struct tuner *t, u16 ifc)
{
u32 N = (((t->freq<<3)+ifc)&0x3fffc);
u32 freq;
u32 N;
N = N >> get_freq_entry(div_table, t->freq);
if (t->mode == V4L2_TUNER_RADIO)
freq = t->freq / 1000;
else
freq = t->freq;
N = (((freq<<3)+ifc)&0x3fffc);
N = N >> get_freq_entry(div_table, freq);
t->i2c_set_freq[0] = 0;
t->i2c_set_freq[1] = (unsigned char)(N>>8);
t->i2c_set_freq[2] = (unsigned char) N;
t->i2c_set_freq[3] = 0x40;
t->i2c_set_freq[4] = 0x52;
t->i2c_set_freq[5] = get_freq_entry(band_table, t->freq);
t->i2c_set_freq[6] = get_freq_entry(agc_table, t->freq);
t->i2c_set_freq[5] = get_freq_entry(band_table, freq);
t->i2c_set_freq[6] = get_freq_entry(agc_table, freq);
t->i2c_set_freq[7] = 0x8f;
}
......
......@@ -368,7 +368,7 @@ static int tda9887_set_tvnorm(struct tda9887 *t, char *buf)
if (t->radio_mode == V4L2_TUNER_MODE_MONO)
norm = &radio_mono;
else
norm = &radio_stereo;
norm = &radio_stereo;
} else {
for (i = 0; i < ARRAY_SIZE(tvnorms); i++) {
if (tvnorms[i].std & t->std) {
......@@ -566,7 +566,6 @@ static int tda9887_configure(struct tda9887 *t)
if (UNSET != t->pinnacle_id) {
tda9887_set_pinnacle(t,buf);
}
tda9887_set_config(t,buf);
tda9887_set_insmod(t,buf);
......@@ -615,8 +614,8 @@ static int tda9887_attach(struct i2c_adapter *adap, int addr, int kind)
t->pinnacle_id = UNSET;
t->radio_mode = V4L2_TUNER_MODE_STEREO;
i2c_set_clientdata(&t->client, t);
i2c_attach_client(&t->client);
i2c_set_clientdata(&t->client, t);
i2c_attach_client(&t->client);
return 0;
}
......
/*
* For Philips TEA5767 FM Chip used on some TV Cards like Prolink Pixelview
* I2C address is allways 0xC0.
*
* $Id: tea5767.c,v 1.11 2005/06/21 15:40:33 mchehab Exp $
*
* Copyright (c) 2005 Mauro Carvalho Chehab (mchehab@brturbo.com.br)
* This code is placed under the terms of the GNU General Public License
*
* tea5767 autodetection thanks to Torsten Seeboth and Atsushi Nakagawa
* from their contributions on DScaler.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/videodev.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include <media/tuner.h>
/* Declared at tuner-core.c */
extern unsigned int tuner_debug;
#define PREFIX "TEA5767 "
/*****************************************************************************/
/******************************
* Write mode register values *
******************************/
/* First register */
#define TEA5767_MUTE 0x80 /* Mutes output */
#define TEA5767_SEARCH 0x40 /* Activates station search */
/* Bits 0-5 for divider MSB */
/* Second register */
/* Bits 0-7 for divider LSB */
/* Third register */
/* Station search from botton to up */
#define TEA5767_SEARCH_UP 0x80
/* Searches with ADC output = 10 */
#define TEA5767_SRCH_HIGH_LVL 0x60
/* Searches with ADC output = 10 */
#define TEA5767_SRCH_MID_LVL 0x40
/* Searches with ADC output = 5 */
#define TEA5767_SRCH_LOW_LVL 0x20
/* if on, div=4*(Frf+Fif)/Fref otherwise, div=4*(Frf-Fif)/Freq) */
#define TEA5767_HIGH_LO_INJECT 0x10
/* Disable stereo */
#define TEA5767_MONO 0x08
/* Disable right channel and turns to mono */
#define TEA5767_MUTE_RIGHT 0x04
/* Disable left channel and turns to mono */
#define TEA5767_MUTE_LEFT 0x02
#define TEA5767_PORT1_HIGH 0x01
/* Forth register */
#define TEA5767_PORT2_HIGH 0x80
/* Chips stops working. Only I2C bus remains on */
#define TEA5767_STDBY 0x40
/* Japan freq (76-108 MHz. If disabled, 87.5-108 MHz */
#define TEA5767_JAPAN_BAND 0x20
/* Unselected means 32.768 KHz freq as reference. Otherwise Xtal at 13 MHz */
#define TEA5767_XTAL_32768 0x10
/* Cuts weak signals */
#define TEA5767_SOFT_MUTE 0x08
/* Activates high cut control */
#define TEA5767_HIGH_CUT_CTRL 0x04
/* Activates stereo noise control */
#define TEA5767_ST_NOISE_CTL 0x02
/* If activate PORT 1 indicates SEARCH or else it is used as PORT1 */
#define TEA5767_SRCH_IND 0x01
/* Fiveth register */
/* By activating, it will use Xtal at 13 MHz as reference for divider */
#define TEA5767_PLLREF_ENABLE 0x80
/* By activating, deemphasis=50, or else, deemphasis of 50us */
#define TEA5767_DEEMPH_75 0X40
/*****************************
* Read mode register values *
*****************************/
/* First register */
#define TEA5767_READY_FLAG_MASK 0x80
#define TEA5767_BAND_LIMIT_MASK 0X40
/* Bits 0-5 for divider MSB after search or preset */
/* Second register */
/* Bits 0-7 for divider LSB after search or preset */
/* Third register */
#define TEA5767_STEREO_MASK 0x80
#define TEA5767_IF_CNTR_MASK 0x7f
/* Four register */
#define TEA5767_ADC_LEVEL_MASK 0xf0
/* should be 0 */
#define TEA5767_CHIP_ID_MASK 0x0f
/* Fiveth register */
/* Reserved for future extensions */
#define TEA5767_RESERVED_MASK 0xff
/*****************************************************************************/
static void set_tv_freq(struct i2c_client *c, unsigned int freq)
{
struct tuner *t = i2c_get_clientdata(c);
tuner_warn("This tuner doesn't support TV freq.\n");
}
static void tea5767_status_dump(unsigned char *buffer)
{
unsigned int div, frq;
if (TEA5767_READY_FLAG_MASK & buffer[0])
printk(PREFIX "Ready Flag ON\n");
else
printk(PREFIX "Ready Flag OFF\n");
if (TEA5767_BAND_LIMIT_MASK & buffer[0])
printk(PREFIX "Tuner at band limit\n");
else
printk(PREFIX "Tuner not at band limit\n");
div=((buffer[0]&0x3f)<<8) | buffer[1];
switch (TEA5767_HIGH_LO_32768) {
case TEA5767_HIGH_LO_13MHz:
frq = 1000*(div*50-700-225)/4; /* Freq in KHz */
break;
case TEA5767_LOW_LO_13MHz:
frq = 1000*(div*50+700+225)/4; /* Freq in KHz */
break;
case TEA5767_LOW_LO_32768:
frq = 1000*(div*32768/1000+700+225)/4; /* Freq in KHz */
break;
case TEA5767_HIGH_LO_32768:
default:
frq = 1000*(div*32768/1000-700-225)/4; /* Freq in KHz */
break;
}
buffer[0] = (div>>8) & 0x3f;
buffer[1] = div & 0xff;
printk(PREFIX "Frequency %d.%03d KHz (divider = 0x%04x)\n",
frq/1000,frq%1000,div);
if (TEA5767_STEREO_MASK & buffer[2])
printk(PREFIX "Stereo\n");
else
printk(PREFIX "Mono\n");
printk(PREFIX "IF Counter = %d\n",buffer[2] & TEA5767_IF_CNTR_MASK);
printk(PREFIX "ADC Level = %d\n",(buffer[3] & TEA5767_ADC_LEVEL_MASK)>>4);
printk(PREFIX "Chip ID = %d\n",(buffer[3] & TEA5767_CHIP_ID_MASK));
printk(PREFIX "Reserved = 0x%02x\n",(buffer[4] & TEA5767_RESERVED_MASK));
}
/* Freq should be specifyed at 62.5 Hz */
static void set_radio_freq(struct i2c_client *c, unsigned int frq)
{
struct tuner *t = i2c_get_clientdata(c);
unsigned char buffer[5];
unsigned div;
int rc;
if ( tuner_debug )
printk(PREFIX "radio freq counter %d\n",frq);
/* Rounds freq to next decimal value - for 62.5 KHz step */
/* frq = 20*(frq/16)+radio_frq[frq%16]; */
buffer[2] = TEA5767_PORT1_HIGH;
buffer[3] = TEA5767_PORT2_HIGH | TEA5767_HIGH_CUT_CTRL | TEA5767_ST_NOISE_CTL | TEA5767_JAPAN_BAND;
buffer[4]=0;
if (t->audmode == V4L2_TUNER_MODE_MONO) {
tuner_dbg("TEA5767 set to mono\n");
buffer[2] |= TEA5767_MONO;
} else
tuner_dbg("TEA5767 set to stereo\n");
switch (t->type) {
case TEA5767_HIGH_LO_13MHz:
tuner_dbg("TEA5767 radio HIGH LO inject xtal @ 13 MHz\n");
buffer[2] |= TEA5767_HIGH_LO_INJECT;
buffer[4] |= TEA5767_PLLREF_ENABLE;
div = (frq*4/16+700+225+25)/50;
break;
case TEA5767_LOW_LO_13MHz:
tuner_dbg("TEA5767 radio LOW LO inject xtal @ 13 MHz\n");
buffer[4] |= TEA5767_PLLREF_ENABLE;
div = (frq*4/16-700-225+25)/50;
break;
case TEA5767_LOW_LO_32768:
tuner_dbg("TEA5767 radio LOW LO inject xtal @ 32,768 MHz\n");
buffer[3] |= TEA5767_XTAL_32768;
/* const 700=4000*175 Khz - to adjust freq to right value */
div = (1000*(frq*4/16-700-225)+16384)>>15;
break;
case TEA5767_HIGH_LO_32768:
default:
tuner_dbg("TEA5767 radio HIGH LO inject xtal @ 32,768 MHz\n");
buffer[2] |= TEA5767_HIGH_LO_INJECT;
buffer[3] |= TEA5767_XTAL_32768;
div = (1000*(frq*4/16+700+225)+16384)>>15;
break;
}
buffer[0] = (div>>8) & 0x3f;
buffer[1] = div & 0xff;
if ( tuner_debug )
tea5767_status_dump(buffer);
if (5 != (rc = i2c_master_send(c,buffer,5)))
tuner_warn("i2c i/o error: rc == %d (should be 5)\n",rc);
}
static int tea5767_signal(struct i2c_client *c)
{
unsigned char buffer[5];
int rc;
struct tuner *t = i2c_get_clientdata(c);
memset(buffer,0,sizeof(buffer));
if (5 != (rc = i2c_master_recv(c,buffer,5)))
tuner_warn ( "i2c i/o error: rc == %d (should be 5)\n",rc);
return ((buffer[3] & TEA5767_ADC_LEVEL_MASK) <<(13-4));
}
static int tea5767_stereo(struct i2c_client *c)
{
unsigned char buffer[5];
int rc;
struct tuner *t = i2c_get_clientdata(c);
memset(buffer,0,sizeof(buffer));
if (5 != (rc = i2c_master_recv(c,buffer,5)))
tuner_warn ( "i2c i/o error: rc == %d (should be 5)\n",rc);
rc = buffer[2] & TEA5767_STEREO_MASK;
if ( tuner_debug )
tuner_dbg("TEA5767 radio ST GET = %02x\n", rc);
return ( (buffer[2] & TEA5767_STEREO_MASK) ? V4L2_TUNER_SUB_STEREO: 0);
}
int tea_detection(struct i2c_client *c)
{
unsigned char buffer[5]= { 0xff, 0xff, 0xff, 0xff, 0xff };
int rc;
struct tuner *t = i2c_get_clientdata(c);
if (5 != (rc = i2c_master_recv(c,buffer,5))) {
tuner_warn ( "it is not a TEA5767. Received %i chars.\n",rc );
return EINVAL;
}
/* If all bytes are the same then it's a TV tuner and not a tea5767 chip. */
if (buffer[0] == buffer[1] && buffer[0] == buffer[2] &&
buffer[0] == buffer[3] && buffer[0] == buffer[4]) {
tuner_warn ( "All bytes are equal. It is not a TEA5767\n" );
return EINVAL;
}
/* Status bytes:
* Byte 4: bit 3:1 : CI (Chip Identification) == 0
* bit 0 : internally set to 0
* Byte 5: bit 7:0 : == 0
*/
if (!((buffer[3] & 0x0f) == 0x00) && (buffer[4] == 0x00)) {
tuner_warn ( "Chip ID is not zero. It is not a TEA5767\n" );
return EINVAL;
}
tuner_warn ( "TEA5767 detected.\n" );
return 0;
}
int tea5767_tuner_init(struct i2c_client *c)
{
struct tuner *t = i2c_get_clientdata(c);
if (tea_detection(c)==EINVAL) return EINVAL;
tuner_info("type set to %d (%s)\n",
t->type, TEA5767_TUNER_NAME);
strlcpy(c->name, TEA5767_TUNER_NAME, sizeof(c->name));
t->tv_freq = set_tv_freq;
t->radio_freq = set_radio_freq;
t->has_signal = tea5767_signal;
t->is_stereo = tea5767_stereo;
return (0);
}
/*
* $Id: tuner-core.c,v 1.15 2005/06/12 01:36:14 mchehab Exp $
* $Id: tuner-core.c,v 1.29 2005/06/21 15:40:33 mchehab Exp $
*
* i2c tv tuner chip device driver
* core core, i.e. kernel interfaces, registering and so on
......@@ -26,7 +26,6 @@
/*
* comment line bellow to return to old behavor, where only one I2C device is supported
*/
#define CONFIG_TUNER_MULTI_I2C /**/
#define UNSET (-1U)
......@@ -58,9 +57,7 @@ MODULE_AUTHOR("Ralph Metzler, Gerd Knorr, Gunther Mayer");
MODULE_LICENSE("GPL");
static int this_adap;
#ifdef CONFIG_TUNER_MULTI_I2C
static unsigned short first_tuner, tv_tuner, radio_tuner;
#endif
static struct i2c_driver driver;
static struct i2c_client client_template;
......@@ -81,26 +78,9 @@ static void set_tv_freq(struct i2c_client *c, unsigned int freq)
return;
}
if (freq < tv_range[0]*16 || freq > tv_range[1]*16) {
if (freq >= tv_range[0]*16364 && freq <= tv_range[1]*16384) {
/* V4L2_TUNER_CAP_LOW frequency */
tuner_dbg("V4L2_TUNER_CAP_LOW freq selected for TV. Tuners yet doesn't support converting it to valid freq.\n");
t->tv_freq(c,freq>>10);
return;
} else {
/* FIXME: better do that chip-specific, but
right now we don't have that in the config
struct and this way is still better than no
check at all */
tuner_info("TV freq (%d.%02d) out of range (%d-%d)\n",
freq/16,freq%16*100/16,tv_range[0],tv_range[1]);
return;
}
}
tuner_dbg("62.5 Khz freq step selected for TV.\n");
t->tv_freq(c,freq);
}
......@@ -116,31 +96,18 @@ static void set_radio_freq(struct i2c_client *c, unsigned int freq)
tuner_info("no radio tuning for this one, sorry.\n");
return;
}
if (freq < radio_range[0]*16 || freq > radio_range[1]*16) {
if (freq >= tv_range[0]*16364 && freq <= tv_range[1]*16384) {
/* V4L2_TUNER_CAP_LOW frequency */
if (t->type == TUNER_TEA5767) {
tuner_info("radio freq step 62.5Hz (%d.%06d)\n",(freq>>14),freq%(1<<14)*10000);
t->radio_freq(c,freq>>10);
return;
}
tuner_dbg("V4L2_TUNER_CAP_LOW freq selected for Radio. Tuners yet doesn't support converting it to valid freq.\n");
tuner_info("radio freq (%d.%06d)\n",(freq>>14),freq%(1<<14)*10000);
t->radio_freq(c,freq>>10);
return;
} else {
tuner_info("radio freq (%d.%02d) out of range (%d-%d)\n",
freq/16,freq%16*100/16,
radio_range[0],radio_range[1]);
return;
}
if (freq >= radio_range[0]*16000 && freq <= radio_range[1]*16000) {
if (tuner_debug)
tuner_info("radio freq step 62.5Hz (%d.%06d)\n",
freq/16000,freq%16000*1000/16);
t->radio_freq(c,freq);
} else {
tuner_info("radio freq (%d.%02d) out of range (%d-%d)\n",
freq/16,freq%16*100/16,
radio_range[0],radio_range[1]);
}
tuner_dbg("62.5 Khz freq step selected for Radio.\n");
t->radio_freq(c,freq);
return;
}
static void set_freq(struct i2c_client *c, unsigned long freq)
......@@ -166,8 +133,8 @@ static void set_freq(struct i2c_client *c, unsigned long freq)
static void set_type(struct i2c_client *c, unsigned int type)
{
struct tuner *t = i2c_get_clientdata(c);
unsigned char buffer[4];
tuner_dbg ("I2C addr 0x%02x with type %d\n",c->addr<<1,type);
/* sanity check */
if (type == UNSET || type == TUNER_ABSENT)
return;
......@@ -179,8 +146,8 @@ static void set_type(struct i2c_client *c, unsigned int type)
t->type = type;
return;
}
if (t->initialized)
/* run only once */
if ((t->initialized) && (t->type == type))
/* run only once except type change Hac 04/05*/
return;
t->initialized = 1;
......@@ -193,25 +160,42 @@ static void set_type(struct i2c_client *c, unsigned int type)
case TUNER_PHILIPS_TDA8290:
tda8290_init(c);
break;
case TUNER_TEA5767:
if (tea5767_tuner_init(c)==EINVAL) t->type=TUNER_ABSENT;
break;
case TUNER_PHILIPS_FMD1216ME_MK3:
buffer[0] = 0x0b;
buffer[1] = 0xdc;
buffer[2] = 0x9c;
buffer[3] = 0x60;
i2c_master_send(c,buffer,4);
mdelay(1);
buffer[2] = 0x86;
buffer[3] = 0x54;
i2c_master_send(c,buffer,4);
default_tuner_init(c);
break;
default:
/* TEA5767 autodetection code */
if (tea5767_tuner_init(c)!=EINVAL) {
t->type = TUNER_TEA5767;
if (first_tuner == 0x60)
first_tuner++;
break;
}
default_tuner_init(c);
break;
}
tuner_dbg ("I2C addr 0x%02x with type %d\n",c->addr<<1,type);
}
#ifdef CONFIG_TUNER_MULTI_I2C
#define CHECK_ADDR(tp,cmd,tun) if (client->addr!=tp) { \
return 0; } else \
return 0; } else if (tuner_debug) \
tuner_info ("Cmd %s accepted to "tun"\n",cmd);
#define CHECK_MODE(cmd) if (t->mode == V4L2_TUNER_RADIO) { \
CHECK_ADDR(radio_tuner,cmd,"radio") } else \
{ CHECK_ADDR(tv_tuner,cmd,"TV"); }
#else
#define CHECK_ADDR(tp,cmd,tun) tuner_info ("Cmd %s accepted to "tun"\n",cmd);
#define CHECK_MODE(cmd) tuner_info ("Cmd %s accepted\n",cmd);
#endif
#ifdef CONFIG_TUNER_MULTI_I2C
static void set_addr(struct i2c_client *c, struct tuner_addr *tun_addr)
{
......@@ -242,9 +226,6 @@ static void set_addr(struct i2c_client *c, struct tuner_addr *tun_addr)
}
set_type(c,tun_addr->type);
}
#else
#define set_addr(c,tun_addr) set_type(c,(tun_addr)->type)
#endif
static char pal[] = "-";
module_param_string(pal, pal, sizeof(pal), 0644);
......@@ -284,17 +265,12 @@ static int tuner_attach(struct i2c_adapter *adap, int addr, int kind)
{
struct tuner *t;
#ifndef CONFIG_TUNER_MULTI_I2C
if (this_adap > 0)
return -1;
#else
/* by default, first I2C card is both tv and radio tuner */
if (this_adap == 0) {
first_tuner = addr;
tv_tuner = addr;
radio_tuner = addr;
}
#endif
this_adap++;
client_template.adapter = adap;
......@@ -308,6 +284,7 @@ static int tuner_attach(struct i2c_adapter *adap, int addr, int kind)
i2c_set_clientdata(&t->i2c, t);
t->type = UNSET;
t->radio_if2 = 10700*1000; /* 10.7MHz - FM radio */
t->audmode = V4L2_TUNER_MODE_STEREO;
i2c_attach_client(&t->i2c);
tuner_info("chip found @ 0x%x (%s)\n",
......@@ -325,11 +302,9 @@ static int tuner_probe(struct i2c_adapter *adap)
}
this_adap = 0;
#ifdef CONFIG_TUNER_MULTI_I2C
first_tuner = 0;
tv_tuner = 0;
radio_tuner = 0;
#endif
if (adap->class & I2C_CLASS_TV_ANALOG)
return i2c_probe(adap, &addr_data, tuner_attach);
......@@ -392,8 +367,7 @@ tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
t->radio_if2 = 41300 * 1000;
break;
}
break;
break;
/* --- v4l ioctls --- */
/* take care: bttv does userspace copying, we'll get a
kernel pointer here... */
......@@ -440,11 +414,18 @@ tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
vt->signal = t->has_signal(client);
if (t->is_stereo) {
if (t->is_stereo(client))
vt-> flags |= VIDEO_TUNER_STEREO_ON;
vt->flags |= VIDEO_TUNER_STEREO_ON;
else
vt-> flags &= 0xffff ^ VIDEO_TUNER_STEREO_ON;
vt->flags &= ~VIDEO_TUNER_STEREO_ON;
}
vt->flags |= V4L2_TUNER_CAP_LOW; /* Allow freqs at 62.5 Hz */
vt->rangelow = radio_range[0] * 16000;
vt->rangehigh = radio_range[1] * 16000;
} else {
vt->rangelow = tv_range[0] * 16;
vt->rangehigh = tv_range[1] * 16;
}
return 0;
......@@ -510,20 +491,46 @@ tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
tuner -> signal = t->has_signal(client);
if (t->is_stereo) {
if (t->is_stereo(client)) {
tuner -> capability |= V4L2_TUNER_CAP_STEREO;
tuner -> rxsubchans |= V4L2_TUNER_SUB_STEREO;
tuner -> rxsubchans = V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_MONO;
} else {
tuner -> rxsubchans &= 0xffff ^ V4L2_TUNER_SUB_STEREO;
tuner -> rxsubchans = V4L2_TUNER_SUB_MONO;
}
}
tuner->capability |= V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO;
tuner->audmode = t->audmode;
tuner->rangelow = radio_range[0] * 16000;
tuner->rangehigh = radio_range[1] * 16000;
} else {
tuner->rangelow = tv_range[0] * 16;
tuner->rangehigh = tv_range[1] * 16;
}
/* Wow to deal with V4L2_TUNER_CAP_LOW ? For now, it accepts from low at 62.5KHz step to high at 62.5 Hz */
tuner->rangelow = tv_range[0] * 16;
// tuner->rangehigh = tv_range[1] * 16;
// tuner->rangelow = tv_range[0] * 16384;
tuner->rangehigh = tv_range[1] * 16384;
break;
}
case VIDIOC_S_TUNER: /* Allow changing radio range and audio mode */
{
struct v4l2_tuner *tuner = arg;
CHECK_ADDR(radio_tuner,"VIDIOC_S_TUNER","radio");
SWITCH_V4L2;
/* To switch the audio mode, applications initialize the
index and audmode fields and the reserved array and
call the VIDIOC_S_TUNER ioctl. */
/* rxsubchannels: V4L2_TUNER_MODE_MONO, V4L2_TUNER_MODE_STEREO,
V4L2_TUNER_MODE_LANG1, V4L2_TUNER_MODE_LANG2,
V4L2_TUNER_MODE_SAP */
if (tuner->audmode == V4L2_TUNER_MODE_MONO)
t->audmode = V4L2_TUNER_MODE_MONO;
else
t->audmode = V4L2_TUNER_MODE_STEREO;
set_radio_freq(client, t->freq);
break;
}
case TDA9887_SET_CONFIG: /* Nothing to do on tuner-core */
break;
default:
tuner_dbg ("Unimplemented IOCTL 0x%08x called to tuner.\n", cmd);
/* nothing */
......
/*
* $Id: tuner-simple.c,v 1.21 2005/06/10 19:53:26 nsh Exp $
* $Id: tuner-simple.c,v 1.31 2005/06/21 16:02:25 mkrufky Exp $
*
* i2c tv tuner chip device driver
* controls all those simple 4-control-bytes style tuners.
......@@ -207,28 +207,27 @@ static struct tunertype tuners[] = {
{ "LG PAL (TAPE series)", LGINNOTEK, PAL,
16*170.00, 16*450.00, 0x01,0x02,0x08,0xce,623},
{ "Philips PAL/SECAM multi (FQ1216AME MK4)", Philips, PAL,
16*160.00,16*442.00,0x01,0x02,0x04,0xce,623 },
{ "Philips FQ1236A MK4", Philips, NTSC,
16*160.00,16*442.00,0x01,0x02,0x04,0x8e,732 },
{ "Philips PAL/SECAM multi (FQ1216AME MK4)", Philips, PAL,
16*160.00,16*442.00,0x01,0x02,0x04,0xce,623 },
{ "Philips FQ1236A MK4", Philips, NTSC,
16*160.00,16*442.00,0x01,0x02,0x04,0x8e,732 },
/* Should work for TVF8531MF, TVF8831MF, TVF8731MF */
{ "Ymec TVision TVF-8531MF", Philips, NTSC,
16*160.00,16*454.00,0xa0,0x90,0x30,0x8e,732},
{ "Ymec TVision TVF-5533MF", Philips, NTSC,
16*160.00,16*454.00,0x01,0x02,0x04,0x8e,732},
{ "Thomson DDT 7611 (ATSC/NTSC)", THOMSON, ATSC,
16*157.25,16*454.00,0x39,0x3a,0x3c,0x8e,732},
{ "Tena TNF9533-D/IF", LGINNOTEK, PAL,
16*160.25, 16*464.25, 0x01,0x02,0x08,0x8e,623},
/* Should work for TNF9533-D/IF, TNF9533-B/DF */
{ "Tena TNF9533-D/IF", Philips, PAL,
16*160.25,16*464.25,0x01,0x02,0x04,0x8e,623},
/*
* This entry is for TEA5767 FM radio only chip used on several boards
* w/TV tuner
*/
/* This entry is for TEA5767 FM radio only chip used on several boards w/TV tuner */
{ TEA5767_TUNER_NAME, Philips, RADIO,
-1, -1, 0, 0, 0, TEA5767_LOW_LO_32768,0},
-1, -1, 0, 0, 0, TEA5767_LOW_LO_32768,0},
{ "Philips FMD1216ME MK3 Hybrid Tuner", Philips, PAL,
16*160.00,16*442.00,0x51,0x52,0x54,0x86,623 },
};
unsigned const int tuner_count = ARRAY_SIZE(tuners);
......@@ -455,24 +454,24 @@ static void default_set_radio_freq(struct i2c_client *c, unsigned int freq)
int rc;
tun=&tuners[t->type];
div = freq + (int)(16*10.7);
div = (freq / 1000) + (int)(16*10.7);
buffer[2] = tun->config;
switch (t->type) {
case TUNER_TENA_9533_DI:
case TUNER_YMEC_TVF_5533MF:
/*These values are empirically determinated */
div = (freq*122)/16 - 20;
div = (freq * 122) / 16000 - 20;
buffer[2] = 0x88; /* could be also 0x80 */
buffer[3] = 0x19; /* could be also 0x10, 0x18, 0x99 */
break;
case TUNER_PHILIPS_FM1216ME_MK3:
case TUNER_PHILIPS_FM1236_MK3:
case TUNER_PHILIPS_FMD1216ME_MK3:
buffer[3] = 0x19;
break;
case TUNER_PHILIPS_FM1256_IH3:
div = (20 * freq)/16 + 333 * 2;
div = (20 * freq) / 16000 + 333 * 2;
buffer[2] = 0x80;
buffer[3] = 0x19;
break;
......@@ -505,6 +504,7 @@ int default_tuner_init(struct i2c_client *c)
t->radio_freq = default_set_radio_freq;
t->has_signal = tuner_signal;
t->is_stereo = tuner_stereo;
return 0;
}
......
/*
/* $Id: tuner.h,v 1.33 2005/06/21 14:58:08 mkrufky Exp $
*
tuner.h - definition for different tuners
Copyright (C) 1997 Markus Schroeder (schroedm@uni-duesseldorf.de)
......@@ -23,6 +24,8 @@
#ifndef _TUNER_H
#define _TUNER_H
#include <linux/videodev2.h>
#include "id.h"
#define ADDR_UNSET (255)
......@@ -88,7 +91,7 @@
#define TUNER_LG_NTSC_TAPE 47
#define TUNER_TNF_8831BGFF 48
#define TUNER_MICROTUNE_4042FI5 49 /* FusionHDTV 3 Gold - 4042 FI5 (3X 8147) */
#define TUNER_MICROTUNE_4042FI5 49 /* DViCO FusionHDTV 3 Gold-Q - 4042 FI5 (3X 8147) */
#define TUNER_TCL_2002N 50
#define TUNER_PHILIPS_FM1256_IH3 51
......@@ -98,18 +101,18 @@
#define TUNER_LG_PAL_TAPE 55 /* Hauppauge PVR-150 PAL */
#define TUNER_PHILIPS_FQ1216AME_MK4 56 /* Hauppauge PVR-150 PAL */
#define TUNER_PHILIPS_FQ1236A_MK4 57 /* Hauppauge PVR-500MCE NTSC */
#define TUNER_PHILIPS_FQ1236A_MK4 57 /* Hauppauge PVR-500MCE NTSC */
#define TUNER_YMEC_TVF_8531MF 58
#define TUNER_YMEC_TVF_5533MF 59 /* Pixelview Pro Ultra NTSC */
#define TUNER_THOMSON_DTT7611 60
#define TUNER_THOMSON_DTT7611 60 /* DViCO FusionHDTV 3 Gold-T */
#define TUNER_TENA_9533_DI 61
#define TUNER_TEA5767 62 /* Only FM Radio Tuner */
#define TUNER_PHILIPS_FMD1216ME_MK3 63
#define TEA5767_TUNER_NAME "Philips TEA5767HN FM Radio"
#define TUNER_THOMSON_DTT7611 60
#define NOTUNER 0
#define PAL 1 /* PAL_BG */
#define PAL_I 2
......@@ -194,11 +197,15 @@ struct tuner {
unsigned char i2c_easy_mode[2];
unsigned char i2c_set_freq[8];
/* used to keep track of audmode */
unsigned int audmode;
/* function ptrs */
void (*tv_freq)(struct i2c_client *c, unsigned int freq);
void (*radio_freq)(struct i2c_client *c, unsigned int freq);
int (*has_signal)(struct i2c_client *c);
int (*is_stereo)(struct i2c_client *c);
int (*set_tuner)(struct i2c_client *c, struct v4l2_tuner *v);
};
extern unsigned int tuner_debug;
......@@ -206,6 +213,7 @@ extern unsigned const int tuner_count;
extern int microtune_init(struct i2c_client *c);
extern int tda8290_init(struct i2c_client *c);
extern int tea5767_tuner_init(struct i2c_client *c);
extern int default_tuner_init(struct i2c_client *c);
#define tuner_warn(fmt, arg...) \
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册