ARM: at91: rm9200: fix usb device clock id

Referring to the datasheet the index 2 is the MCKUDP. When enabled, it
"Enables the automatic disable of the Master Clock of the USB Device
Port when a suspend condition occurs". We fix the index to the real UDP
id which "Enables the 48 MHz clock of the USB Device Port".

Cc: nicolas.ferre@microchip.com
Cc: ludovic.desroches@microchip.com
Cc: alexandre.belloni@bootlin.com
Cc: mturquette@baylibre.com
Cc: sboyd@kernel.org
Cc: claudiu.beznea@microchip.com
Cc: linux-clk@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: kernel@pengutronix.de
Fixes: 02ff48e4 ("clk: at91: add at91rm9200 pmc driver")
Fixes: 0e0e528d ("ARM: dts: at91: rm9200: switch to new clock bindings")
Reviewed-by: NClaudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: NClaudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20221114185923.1023249-2-m.grzeschik@pengutronix.de

arch/arm/boot/dts/at91rm9200.dtsi

@@ -666,7 +666,7 @@
 				compatible = "atmel,at91rm9200-udc";
 				reg = <0xfffb0000 0x4000>;
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 2>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 1>;
 				clock-names = "pclk", "hclk";
 				status = "disabled";
 			};

drivers/clk/at91/at91rm9200.c

@@ -40,7 +40,7 @@ static const struct clk_pll_characteristics rm9200_pll_characteristics = {
 };
 
 static const struct sck at91rm9200_systemck[] = {
-	{ .n = "udpck", .p = "usbck",    .id = 2 },
+	{ .n = "udpck", .p = "usbck",    .id = 1 },
 	{ .n = "uhpck", .p = "usbck",    .id = 4 },
 	{ .n = "pck0",  .p = "prog0",    .id = 8 },
 	{ .n = "pck1",  .p = "prog1",    .id = 9 },