regulator: core: replace sprintf with scnprintf

In order to avoid potential overflows in print_constraints we
better replace sprintf() with scnprintf().
Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

drivers/regulator/core.c

@@ -780,58 +780,63 @@ static void print_constraints(struct regulator_dev *rdev)
 {
 	struct regulation_constraints *constraints = rdev->constraints;
 	char buf[160] = "";
+	size_t len = sizeof(buf) - 1;
 	int count = 0;
 	int ret;
 
 	if (constraints->min_uV && constraints->max_uV) {
 		if (constraints->min_uV == constraints->max_uV)
-			count += sprintf(buf + count, "%d mV ",
-					 constraints->min_uV / 1000);
+			count += scnprintf(buf + count, len - count, "%d mV ",
+					   constraints->min_uV / 1000);
 		else
-			count += sprintf(buf + count, "%d <--> %d mV ",
-					 constraints->min_uV / 1000,
-					 constraints->max_uV / 1000);
+			count += scnprintf(buf + count, len - count,
+					   "%d <--> %d mV ",
+					   constraints->min_uV / 1000,
+					   constraints->max_uV / 1000);
 	}
 
 	if (!constraints->min_uV ||
 	    constraints->min_uV != constraints->max_uV) {
 		ret = _regulator_get_voltage(rdev);
 		if (ret > 0)
-			count += sprintf(buf + count, "at %d mV ", ret / 1000);
+			count += scnprintf(buf + count, len - count,
+					   "at %d mV ", ret / 1000);
 	}
 
 	if (constraints->uV_offset)
-		count += sprintf(buf + count, "%dmV offset ",
-				 constraints->uV_offset / 1000);
+		count += scnprintf(buf + count, len - count, "%dmV offset ",
+				   constraints->uV_offset / 1000);
 
 	if (constraints->min_uA && constraints->max_uA) {
 		if (constraints->min_uA == constraints->max_uA)
-			count += sprintf(buf + count, "%d mA ",
-					 constraints->min_uA / 1000);
+			count += scnprintf(buf + count, len - count, "%d mA ",
+					   constraints->min_uA / 1000);
 		else
-			count += sprintf(buf + count, "%d <--> %d mA ",
-					 constraints->min_uA / 1000,
-					 constraints->max_uA / 1000);
+			count += scnprintf(buf + count, len - count,
+					   "%d <--> %d mA ",
+					   constraints->min_uA / 1000,
+					   constraints->max_uA / 1000);
 	}
 
 	if (!constraints->min_uA ||
 	    constraints->min_uA != constraints->max_uA) {
 		ret = _regulator_get_current_limit(rdev);
 		if (ret > 0)
-			count += sprintf(buf + count, "at %d mA ", ret / 1000);
+			count += scnprintf(buf + count, len - count,
+					   "at %d mA ", ret / 1000);
 	}
 
 	if (constraints->valid_modes_mask & REGULATOR_MODE_FAST)
-		count += sprintf(buf + count, "fast ");
+		count += scnprintf(buf + count, len - count, "fast ");
 	if (constraints->valid_modes_mask & REGULATOR_MODE_NORMAL)
-		count += sprintf(buf + count, "normal ");
+		count += scnprintf(buf + count, len - count, "normal ");
 	if (constraints->valid_modes_mask & REGULATOR_MODE_IDLE)
-		count += sprintf(buf + count, "idle ");
+		count += scnprintf(buf + count, len - count, "idle ");
 	if (constraints->valid_modes_mask & REGULATOR_MODE_STANDBY)
-		count += sprintf(buf + count, "standby");
+		count += scnprintf(buf + count, len - count, "standby");
 
 	if (!count)
-		sprintf(buf, "no parameters");
+		scnprintf(buf, len, "no parameters");
 
 	rdev_dbg(rdev, "%s\n", buf);