Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (21 commits)
  libata: remove irq_on from ata_bus_reset() and ata_std_postreset()
  ata_piix: kill incorrect invalid map value warning
  libata: add another Maxtor drive with broken NCQ to the list
  [libata] sata_mv: Fix and clean up per-chip-generation tests
  [libata] sata_mv: Convert to new exception handling (EH) infrastructure
  [libata] sata_mv: minor bug fixes, enhancements, and cleanups (prep for new EH)
  [libata] sata_mv: Minor cleanups and renaming, preparing for new EH & NCQ
  libata-link: add PMP related ATA constants
  libata-link: separate out ata_eh_handle_dev_fail()
  pata_hpt3x3: fix DMA Kconfig option to actually have a hope of working
  Add Hitachi HDS7250SASUN500G 0621KTAWSD to NCQ blacklist
  pata_scc.c: Workaround for errata A308
  libata: add FUJITSU MHV2080BH to NCQ blacklist
  pata_hpt3x3: major reworking and testing
  libata: clean up horkage handling
  libata: quirk IOMEGA ZIP 250 ATAPI FLOPPY
  libata: simplify PCI legacy SFF host handling
  pata_mpc52xx: suspend/resume support
  sata_promise: SATA hotplug support, take 2
  pata_sis: FIFO whack
  ...

drivers/ata/Kconfig

@@ -309,7 +309,7 @@ config PATA_HPT3X2N
 	  If unsure, say N.
 
 config PATA_HPT3X3
-	tristate "HPT 343/363 PATA support (Experimental)"
+	tristate "HPT 343/363 PATA support"
 	depends on PCI
 	help
 	  This option enables support for the HPT 343/363
@@ -317,6 +317,14 @@ config PATA_HPT3X3
 
 	  If unsure, say N.
 
+config PATA_HPT3X3_DMA
+	bool "HPT 343/363 DMA support (Experimental)"
+	depends on PATA_HPT3X3
+	help
+	  This option enables DMA support for the HPT343/363
+	  controllers. Enable with care as there are still some
+	  problems with DMA on this chipset.
+
 config PATA_ISAPNP
 	tristate "ISA Plug and Play PATA support (Experimental)"
 	depends on EXPERIMENTAL && ISAPNP

drivers/ata/ata_piix.c

@@ -414,7 +414,7 @@ static const struct piix_map_db ich6m_map_db = {
 	 */
 	.map = {
 		/* PM   PS   SM   SS       MAP */
-		{  P0,  P2,  RV,  RV }, /* 00b */
+		{  P0,  P2,  NA,  NA }, /* 00b */
 		{ IDE, IDE,  P1,  P3 }, /* 01b */
 		{  P0,  P2, IDE, IDE }, /* 10b */
 		{  RV,  RV,  RV,  RV },

drivers/ata/libata-core.c

@@ -71,6 +71,7 @@ static unsigned int ata_dev_init_params(struct ata_device *dev,
 					u16 heads, u16 sectors);
 static unsigned int ata_dev_set_xfermode(struct ata_device *dev);
 static void ata_dev_xfermask(struct ata_device *dev);
+static unsigned long ata_dev_blacklisted(const struct ata_device *dev);
 
 unsigned int ata_print_id = 1;
 static struct workqueue_struct *ata_wq;
@@ -1283,18 +1284,11 @@ static unsigned int ata_id_xfermask(const u16 *id)
 void ata_port_queue_task(struct ata_port *ap, work_func_t fn, void *data,
 			 unsigned long delay)
 {
-	int rc;
-
-	if (ap->pflags & ATA_PFLAG_FLUSH_PORT_TASK)
-		return;
-
 	PREPARE_DELAYED_WORK(&ap->port_task, fn);
 	ap->port_task_data = data;
 
-	rc = queue_delayed_work(ata_wq, &ap->port_task, delay);
-
-	/* rc == 0 means that another user is using port task */
-	WARN_ON(rc == 0);
+	/* may fail if ata_port_flush_task() in progress */
+	queue_delayed_work(ata_wq, &ap->port_task, delay);
 }
 
 /**
@@ -1309,32 +1303,9 @@ void ata_port_queue_task(struct ata_port *ap, work_func_t fn, void *data,
  */
 void ata_port_flush_task(struct ata_port *ap)
 {
-	unsigned long flags;
-
 	DPRINTK("ENTER\n");
 
-	spin_lock_irqsave(ap->lock, flags);
-	ap->pflags |= ATA_PFLAG_FLUSH_PORT_TASK;
-	spin_unlock_irqrestore(ap->lock, flags);
-
-	DPRINTK("flush #1\n");
-	cancel_work_sync(&ap->port_task.work); /* akpm: seems unneeded */
-
-	/*
-	 * At this point, if a task is running, it's guaranteed to see
-	 * the FLUSH flag; thus, it will never queue pio tasks again.
-	 * Cancel and flush.
-	 */
-	if (!cancel_delayed_work(&ap->port_task)) {
-		if (ata_msg_ctl(ap))
-			ata_port_printk(ap, KERN_DEBUG, "%s: flush #2\n",
-					__FUNCTION__);
-		cancel_work_sync(&ap->port_task.work);
-	}
-
-	spin_lock_irqsave(ap->lock, flags);
-	ap->pflags &= ~ATA_PFLAG_FLUSH_PORT_TASK;
-	spin_unlock_irqrestore(ap->lock, flags);
+	cancel_rearming_delayed_work(&ap->port_task);
 
 	if (ata_msg_ctl(ap))
 		ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __FUNCTION__);
@@ -1814,7 +1785,7 @@ static void ata_dev_config_ncq(struct ata_device *dev,
 		desc[0] = '\0';
 		return;
 	}
-	if (ata_device_blacklisted(dev) & ATA_HORKAGE_NONCQ) {
+	if (dev->horkage & ATA_HORKAGE_NONCQ) {
 		snprintf(desc, desc_sz, "NCQ (not used)");
 		return;
 	}
@@ -1863,6 +1834,9 @@ int ata_dev_configure(struct ata_device *dev)
 	if (ata_msg_probe(ap))
 		ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __FUNCTION__);
 
+	/* set horkage */
+	dev->horkage |= ata_dev_blacklisted(dev);
+
 	/* let ACPI work its magic */
 	rc = ata_acpi_on_devcfg(dev);
 	if (rc)
@@ -2038,7 +2012,7 @@ int ata_dev_configure(struct ata_device *dev)
 		dev->max_sectors = ATA_MAX_SECTORS;
 	}
 
-	if (ata_device_blacklisted(dev) & ATA_HORKAGE_MAX_SEC_128)
+	if (dev->horkage & ATA_HORKAGE_MAX_SEC_128)
 		dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
 					 dev->max_sectors);
 
@@ -3190,9 +3164,6 @@ void ata_bus_reset(struct ata_port *ap)
 	if ((slave_possible) && (err != 0x81))
 		ap->device[1].class = ata_dev_try_classify(ap, 1, &err);
 
-	/* re-enable interrupts */
-	ap->ops->irq_on(ap);
-
 	/* is double-select really necessary? */
 	if (ap->device[1].class != ATA_DEV_NONE)
 		ap->ops->dev_select(ap, 1);
@@ -3577,10 +3548,6 @@ void ata_std_postreset(struct ata_port *ap, unsigned int *classes)
 	if (sata_scr_read(ap, SCR_ERROR, &serror) == 0)
 		sata_scr_write(ap, SCR_ERROR, serror);
 
-	/* re-enable interrupts */
-	if (!ap->ops->error_handler)
-		ap->ops->irq_on(ap);
-
 	/* is double-select really necessary? */
 	if (classes[0] != ATA_DEV_NONE)
 		ap->ops->dev_select(ap, 1);
@@ -3770,6 +3737,8 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "SAMSUNG CD-ROM SN-124","N001",	ATA_HORKAGE_NODMA },
 	{ "Seagate STT20000A", NULL,		ATA_HORKAGE_NODMA },
 	{ "IOMEGA  ZIP 250       ATAPI", NULL,	ATA_HORKAGE_NODMA }, /* temporary fix */
+	{ "IOMEGA  ZIP 250       ATAPI       Floppy",
+				NULL,		ATA_HORKAGE_NODMA },
 
 	/* Weird ATAPI devices */
 	{ "TORiSAN DVD-ROM DRD-N216", NULL,	ATA_HORKAGE_MAX_SEC_128 },
@@ -3783,7 +3752,10 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "FUJITSU MHT2060BH",	NULL,		ATA_HORKAGE_NONCQ },
 	/* NCQ is broken */
 	{ "Maxtor 6L250S0",     "BANC1G10",     ATA_HORKAGE_NONCQ },
+	{ "Maxtor 6B200M0",	"BANC1BM0",	ATA_HORKAGE_NONCQ },
 	{ "Maxtor 6B200M0",	"BANC1B10",	ATA_HORKAGE_NONCQ },
+	{ "HITACHI HDS7250SASUN500G 0621KTAWSD", "K2AOAJ0AHITACHI",
+	 ATA_HORKAGE_NONCQ },
 	/* NCQ hard hangs device under heavier load, needs hard power cycle */
 	{ "Maxtor 6B250S0",	"BANC1B70",	ATA_HORKAGE_NONCQ },
 	/* Blacklist entries taken from Silicon Image 3124/3132
@@ -3796,6 +3768,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "HTS541612J9SA00",	"SBDIC7JP",	ATA_HORKAGE_NONCQ, },
 	{ "Hitachi HTS541616J9SA00", "SB4OC70P", ATA_HORKAGE_NONCQ, },
 	{ "WDC WD740ADFD-00NLR1", NULL,		ATA_HORKAGE_NONCQ, },
+	{ "FUJITSU MHV2080BH",	"00840028",	ATA_HORKAGE_NONCQ, },
 
 	/* Devices with NCQ limits */
 
@@ -3803,7 +3776,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ }
 };
 
-unsigned long ata_device_blacklisted(const struct ata_device *dev)
+static unsigned long ata_dev_blacklisted(const struct ata_device *dev)
 {
 	unsigned char model_num[ATA_ID_PROD_LEN + 1];
 	unsigned char model_rev[ATA_ID_FW_REV_LEN + 1];
@@ -3833,7 +3806,7 @@ static int ata_dma_blacklisted(const struct ata_device *dev)
 	if ((dev->ap->flags & ATA_FLAG_PIO_POLLING) &&
 	    (dev->flags & ATA_DFLAG_CDB_INTR))
 		return 1;
-	return (ata_device_blacklisted(dev) & ATA_HORKAGE_NODMA) ? 1 : 0;
+	return (dev->horkage & ATA_HORKAGE_NODMA) ? 1 : 0;
 }
 
 /**
@@ -6557,13 +6530,7 @@ void ata_port_detach(struct ata_port *ap)
 	spin_unlock_irqrestore(ap->lock, flags);
 
 	ata_port_wait_eh(ap);
-
-	/* Flush hotplug task.  The sequence is similar to
-	 * ata_port_flush_task().
-	 */
-	cancel_work_sync(&ap->hotplug_task.work); /* akpm: why? */
-	cancel_delayed_work(&ap->hotplug_task);
-	cancel_work_sync(&ap->hotplug_task.work);
+	cancel_rearming_delayed_work(&ap->hotplug_task);
 
  skip_eh:
 	/* remove the associated SCSI host */
@@ -6952,7 +6919,6 @@ EXPORT_SYMBOL_GPL(ata_host_resume);
 EXPORT_SYMBOL_GPL(ata_id_string);
 EXPORT_SYMBOL_GPL(ata_id_c_string);
 EXPORT_SYMBOL_GPL(ata_id_to_dma_mode);
-EXPORT_SYMBOL_GPL(ata_device_blacklisted);
 EXPORT_SYMBOL_GPL(ata_scsi_simulate);
 
 EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
@@ -6961,9 +6927,9 @@ EXPORT_SYMBOL_GPL(ata_timing_merge);
 
 #ifdef CONFIG_PCI
 EXPORT_SYMBOL_GPL(pci_test_config_bits);
-EXPORT_SYMBOL_GPL(ata_pci_init_native_host);
+EXPORT_SYMBOL_GPL(ata_pci_init_sff_host);
 EXPORT_SYMBOL_GPL(ata_pci_init_bmdma);
-EXPORT_SYMBOL_GPL(ata_pci_prepare_native_host);
+EXPORT_SYMBOL_GPL(ata_pci_prepare_sff_host);
 EXPORT_SYMBOL_GPL(ata_pci_init_one);
 EXPORT_SYMBOL_GPL(ata_pci_remove_one);
 #ifdef CONFIG_PM

drivers/ata/libata-eh.c

@@ -1897,6 +1897,57 @@ static int ata_eh_skip_recovery(struct ata_port *ap)
 	return 1;
 }
 
+static void ata_eh_handle_dev_fail(struct ata_device *dev, int err)
+{
+	struct ata_port *ap = dev->ap;
+	struct ata_eh_context *ehc = &ap->eh_context;
+
+	ehc->tries[dev->devno]--;
+
+	switch (err) {
+	case -ENODEV:
+		/* device missing or wrong IDENTIFY data, schedule probing */
+		ehc->i.probe_mask |= (1 << dev->devno);
+	case -EINVAL:
+		/* give it just one more chance */
+		ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1);
+	case -EIO:
+		if (ehc->tries[dev->devno] == 1) {
+			/* This is the last chance, better to slow
+			 * down than lose it.
+			 */
+			sata_down_spd_limit(ap);
+			ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
+		}
+	}
+
+	if (ata_dev_enabled(dev) && !ehc->tries[dev->devno]) {
+		/* disable device if it has used up all its chances */
+		ata_dev_disable(dev);
+
+		/* detach if offline */
+		if (ata_port_offline(ap))
+			ata_eh_detach_dev(dev);
+
+		/* probe if requested */
+		if ((ehc->i.probe_mask & (1 << dev->devno)) &&
+		    !(ehc->did_probe_mask & (1 << dev->devno))) {
+			ata_eh_detach_dev(dev);
+			ata_dev_init(dev);
+
+			ehc->tries[dev->devno] = ATA_EH_DEV_TRIES;
+			ehc->did_probe_mask |= (1 << dev->devno);
+			ehc->i.action |= ATA_EH_SOFTRESET;
+		}
+	} else {
+		/* soft didn't work?  be haaaaard */
+		if (ehc->i.flags & ATA_EHI_DID_RESET)
+			ehc->i.action |= ATA_EH_HARDRESET;
+		else
+			ehc->i.action |= ATA_EH_SOFTRESET;
+	}
+}
+
 /**
  *	ata_eh_recover - recover host port after error
  *	@ap: host port to recover
@@ -1997,50 +2048,7 @@ static int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 	goto out;
 
  dev_fail:
-	ehc->tries[dev->devno]--;
-
-	switch (rc) {
-	case -ENODEV:
-		/* device missing or wrong IDENTIFY data, schedule probing */
-		ehc->i.probe_mask |= (1 << dev->devno);
-	case -EINVAL:
-		/* give it just one more chance */
-		ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1);
-	case -EIO:
-		if (ehc->tries[dev->devno] == 1) {
-			/* This is the last chance, better to slow
-			 * down than lose it.
-			 */
-			sata_down_spd_limit(ap);
-			ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
-		}
-	}
-
-	if (ata_dev_enabled(dev) && !ehc->tries[dev->devno]) {
-		/* disable device if it has used up all its chances */
-		ata_dev_disable(dev);
-
-		/* detach if offline */
-		if (ata_port_offline(ap))
-			ata_eh_detach_dev(dev);
-
-		/* probe if requested */
-		if ((ehc->i.probe_mask & (1 << dev->devno)) &&
-		    !(ehc->did_probe_mask & (1 << dev->devno))) {
-			ata_eh_detach_dev(dev);
-			ata_dev_init(dev);
-
-			ehc->tries[dev->devno] = ATA_EH_DEV_TRIES;
-			ehc->did_probe_mask |= (1 << dev->devno);
-			ehc->i.action |= ATA_EH_SOFTRESET;
-		}
-	} else {
-		/* soft didn't work?  be haaaaard */
-		if (ehc->i.flags & ATA_EHI_DID_RESET)
-			ehc->i.action |= ATA_EH_HARDRESET;
-		else
-			ehc->i.action |= ATA_EH_SOFTRESET;
-	}
+	ata_eh_handle_dev_fail(dev, rc);
 
 	if (ata_port_nr_enabled(ap)) {
 		ata_port_printk(ap, KERN_WARNING, "failed to recover some "

drivers/ata/libata-sff.c

@@ -604,13 +604,17 @@ int ata_pci_init_bmdma(struct ata_host *host)
 }
 
 /**
- *	ata_pci_init_native_host - acquire native ATA resources and init host
+ *	ata_pci_init_sff_host - acquire native PCI ATA resources and init host
  *	@host: target ATA host
  *
  *	Acquire native PCI ATA resources for @host and initialize the
  *	first two ports of @host accordingly.  Ports marked dummy are
  *	skipped and allocation failure makes the port dummy.
  *
+ *	Note that native PCI resources are valid even for legacy hosts
+ *	as we fix up pdev resources array early in boot, so this
+ *	function can be used for both native and legacy SFF hosts.
+ *
  *	LOCKING:
  *	Inherited from calling layer (may sleep).
  *
@@ -618,7 +622,7 @@ int ata_pci_init_bmdma(struct ata_host *host)
  *	0 if at least one port is initialized, -ENODEV if no port is
  *	available.
  */
-int ata_pci_init_native_host(struct ata_host *host)
+int ata_pci_init_sff_host(struct ata_host *host)
 {
 	struct device *gdev = host->dev;
 	struct pci_dev *pdev = to_pci_dev(gdev);
@@ -673,7 +677,7 @@ int ata_pci_init_native_host(struct ata_host *host)
 }
 
 /**
- *	ata_pci_prepare_native_host - helper to prepare native PCI ATA host
+ *	ata_pci_prepare_sff_host - helper to prepare native PCI ATA host
  *	@pdev: target PCI device
  *	@ppi: array of port_info, must be enough for two ports
  *	@r_host: out argument for the initialized ATA host
@@ -687,9 +691,9 @@ int ata_pci_init_native_host(struct ata_host *host)
  *	RETURNS:
  *	0 on success, -errno otherwise.
  */
-int ata_pci_prepare_native_host(struct pci_dev *pdev,
-				const struct ata_port_info * const * ppi,
-				struct ata_host **r_host)
+int ata_pci_prepare_sff_host(struct pci_dev *pdev,
+			     const struct ata_port_info * const * ppi,
+			     struct ata_host **r_host)
 {
 	struct ata_host *host;
 	int rc;
@@ -705,7 +709,7 @@ int ata_pci_prepare_native_host(struct pci_dev *pdev,
 		goto err_out;
 	}
 
-	rc = ata_pci_init_native_host(host);
+	rc = ata_pci_init_sff_host(host);
 	if (rc)
 		goto err_out;
 
@@ -730,221 +734,6 @@ int ata_pci_prepare_native_host(struct pci_dev *pdev,
 	return rc;
 }
 
-struct ata_legacy_devres {
-	unsigned int	mask;
-	unsigned long	cmd_port[2];
-	void __iomem *	cmd_addr[2];
-	void __iomem *	ctl_addr[2];
-	unsigned int	irq[2];
-	void *		irq_dev_id[2];
-};
-
-static void ata_legacy_free_irqs(struct ata_legacy_devres *legacy_dr)
-{
-	int i;
-
-	for (i = 0; i < 2; i++) {
-		if (!legacy_dr->irq[i])
-			continue;
-
-		free_irq(legacy_dr->irq[i], legacy_dr->irq_dev_id[i]);
-		legacy_dr->irq[i] = 0;
-		legacy_dr->irq_dev_id[i] = NULL;
-	}
-}
-
-static void ata_legacy_release(struct device *gdev, void *res)
-{
-	struct ata_legacy_devres *this = res;
-	int i;
-
-	ata_legacy_free_irqs(this);
-
-	for (i = 0; i < 2; i++) {
-		if (this->cmd_addr[i])
-			ioport_unmap(this->cmd_addr[i]);
-		if (this->ctl_addr[i])
-			ioport_unmap(this->ctl_addr[i]);
-		if (this->cmd_port[i])
-			release_region(this->cmd_port[i], 8);
-	}
-}
-
-static int ata_init_legacy_port(struct ata_port *ap,
-				struct ata_legacy_devres *legacy_dr)
-{
-	struct ata_host *host = ap->host;
-	int port_no = ap->port_no;
-	unsigned long cmd_port, ctl_port;
-
-	if (port_no == 0) {
-		cmd_port = ATA_PRIMARY_CMD;
-		ctl_port = ATA_PRIMARY_CTL;
-	} else {
-		cmd_port = ATA_SECONDARY_CMD;
-		ctl_port = ATA_SECONDARY_CTL;
-	}
-
-	/* request cmd_port */
-	if (request_region(cmd_port, 8, "libata"))
-		legacy_dr->cmd_port[port_no] = cmd_port;
-	else {
-		dev_printk(KERN_WARNING, host->dev,
-			   "0x%0lX IDE port busy\n", cmd_port);
-		return -EBUSY;
-	}
-
-	/* iomap cmd and ctl ports */
-	legacy_dr->cmd_addr[port_no] = ioport_map(cmd_port, 8);
-	legacy_dr->ctl_addr[port_no] = ioport_map(ctl_port, 1);
-	if (!legacy_dr->cmd_addr[port_no] || !legacy_dr->ctl_addr[port_no]) {
-		dev_printk(KERN_WARNING, host->dev,
-			   "failed to map cmd/ctl ports\n");
-		return -ENOMEM;
-	}
-
-	/* init IO addresses */
-	ap->ioaddr.cmd_addr = legacy_dr->cmd_addr[port_no];
-	ap->ioaddr.altstatus_addr = legacy_dr->ctl_addr[port_no];
-	ap->ioaddr.ctl_addr = legacy_dr->ctl_addr[port_no];
-	ata_std_ports(&ap->ioaddr);
-
-	return 0;
-}
-
-/**
- *	ata_init_legacy_host - acquire legacy ATA resources and init ATA host
- *	@host: target ATA host
- *	@was_busy: out parameter, indicates whether any port was busy
- *
- *	Acquire legacy ATA resources for the first two ports of @host
- *	and initialize it accordingly.  Ports marked dummy are skipped
- *	and resource acquistion failure makes the port dummy.
- *
- *	LOCKING:
- *	Inherited from calling layer (may sleep).
- *
- *	RETURNS:
- *	0 if at least one port is initialized, -ENODEV if no port is
- *	available.
- */
-static int ata_init_legacy_host(struct ata_host *host, int *was_busy)
-{
-	struct device *gdev = host->dev;
-	struct ata_legacy_devres *legacy_dr;
-	int i, rc;
-
-	if (!devres_open_group(gdev, NULL, GFP_KERNEL))
-		return -ENOMEM;
-
-	rc = -ENOMEM;
-	legacy_dr = devres_alloc(ata_legacy_release, sizeof(*legacy_dr),
-				 GFP_KERNEL);
-	if (!legacy_dr)
-		goto err_out;
-	devres_add(gdev, legacy_dr);
-
-	for (i = 0; i < 2; i++) {
-		if (ata_port_is_dummy(host->ports[i]))
-			continue;
-
-		rc = ata_init_legacy_port(host->ports[i], legacy_dr);
-		if (rc == 0)
-			legacy_dr->mask |= 1 << i;
-		else {
-			if (rc == -EBUSY)
-				(*was_busy)++;
-			host->ports[i]->ops = &ata_dummy_port_ops;
-		}
-	}
-
-	if (!legacy_dr->mask) {
-		dev_printk(KERN_ERR, gdev, "no available legacy port\n");
-		return -ENODEV;
-	}
-
-	devres_remove_group(gdev, NULL);
-	return 0;
-
- err_out:
-	devres_release_group(gdev, NULL);
-	return rc;
-}
-
-/**
- *	ata_request_legacy_irqs - request legacy ATA IRQs
- *	@host: target ATA host
- *	@handler: array of IRQ handlers
- *	@irq_flags: array of IRQ flags
- *	@dev_id: array of IRQ dev_ids
- *
- *	Request legacy IRQs for non-dummy legacy ports in @host.  All
- *	IRQ parameters are passed as array to allow ports to have
- *	separate IRQ handlers.
- *
- *	LOCKING:
- *	Inherited from calling layer (may sleep).
- *
- *	RETURNS:
- *	0 on success, -errno otherwise.
- */
-static int ata_request_legacy_irqs(struct ata_host *host,
-				   irq_handler_t const *handler,
-				   const unsigned int *irq_flags,
-				   void * const *dev_id)
-{
-	struct device *gdev = host->dev;
-	struct ata_legacy_devres *legacy_dr;
-	int i, rc;
-
-	legacy_dr = devres_find(host->dev, ata_legacy_release, NULL, NULL);
-	BUG_ON(!legacy_dr);
-
-	for (i = 0; i < 2; i++) {
-		unsigned int irq;
-
-		/* FIXME: ATA_*_IRQ() should take generic device not pci_dev */
-		if (i == 0)
-			irq = ATA_PRIMARY_IRQ(to_pci_dev(gdev));
-		else
-			irq = ATA_SECONDARY_IRQ(to_pci_dev(gdev));
-
-		if (!(legacy_dr->mask & (1 << i)))
-			continue;
-
-		if (!handler[i]) {
-			dev_printk(KERN_ERR, gdev,
-				   "NULL handler specified for port %d\n", i);
-			rc = -EINVAL;
-			goto err_out;
-		}
-
-		rc = request_irq(irq, handler[i], irq_flags[i], DRV_NAME,
-				 dev_id[i]);
-		if (rc) {
-			dev_printk(KERN_ERR, gdev,
-				"irq %u request failed (errno=%d)\n", irq, rc);
-			goto err_out;
-		}
-
-		/* record irq allocation in legacy_dr */
-		legacy_dr->irq[i] = irq;
-		legacy_dr->irq_dev_id[i] = dev_id[i];
-
-		/* only used to print info */
-		if (i == 0)
-			host->irq = irq;
-		else
-			host->irq2 = irq;
-	}
-
-	return 0;
-
- err_out:
-	ata_legacy_free_irqs(legacy_dr);
-	return rc;
-}
-
 /**
  *	ata_pci_init_one - Initialize/register PCI IDE host controller
  *	@pdev: Controller to be initialized
@@ -1029,35 +818,11 @@ int ata_pci_init_one(struct pci_dev *pdev,
 #endif
 	}
 
-	/* alloc and init host */
-	host = ata_host_alloc_pinfo(dev, ppi, 2);
-	if (!host) {
-		dev_printk(KERN_ERR, &pdev->dev,
-			   "failed to allocate ATA host\n");
-		rc = -ENOMEM;
+	/* prepare host */
+	rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
+	if (rc)
 		goto err_out;
-	}
 
-	if (!legacy_mode) {
-		rc = ata_pci_init_native_host(host);
-		if (rc)
-			goto err_out;
-	} else {
-		int was_busy = 0;
-
-		rc = ata_init_legacy_host(host, &was_busy);
-		if (was_busy)
-			pcim_pin_device(pdev);
-		if (rc)
-			goto err_out;
-
-		/* request respective PCI regions, may fail */
-		rc = pci_request_region(pdev, 1, DRV_NAME);
-		rc = pci_request_region(pdev, 3, DRV_NAME);
-	}
-
-	/* init BMDMA, may fail */
-	ata_pci_init_bmdma(host);
 	pci_set_master(pdev);
 
 	/* start host and request IRQ */
@@ -1068,17 +833,28 @@ int ata_pci_init_one(struct pci_dev *pdev,
 	if (!legacy_mode) {
 		rc = devm_request_irq(dev, pdev->irq, pi->port_ops->irq_handler,
 				      IRQF_SHARED, DRV_NAME, host);
+		if (rc)
+			goto err_out;
 		host->irq = pdev->irq;
 	} else {
-		irq_handler_t handler[2] = { host->ops->irq_handler,
-					     host->ops->irq_handler };
-		unsigned int irq_flags[2] = { IRQF_SHARED, IRQF_SHARED };
-		void *dev_id[2] = { host, host };
+		if (!ata_port_is_dummy(host->ports[0])) {
+			host->irq = ATA_PRIMARY_IRQ(pdev);
+			rc = devm_request_irq(dev, host->irq,
+					      pi->port_ops->irq_handler,
+					      IRQF_SHARED, DRV_NAME, host);
+			if (rc)
+				goto err_out;
+		}
 
-		rc = ata_request_legacy_irqs(host, handler, irq_flags, dev_id);
+		if (!ata_port_is_dummy(host->ports[1])) {
+			host->irq2 = ATA_SECONDARY_IRQ(pdev);
+			rc = devm_request_irq(dev, host->irq2,
+					      pi->port_ops->irq_handler,
+					      IRQF_SHARED, DRV_NAME, host);
+			if (rc)
+				goto err_out;
+		}
 	}
-	if (rc)
-		goto err_out;
 
 	/* register */
 	rc = ata_host_register(host, pi->sht);

drivers/ata/pata_hpt3x3.c

@@ -23,7 +23,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt3x3"
-#define DRV_VERSION	"0.4.3"
+#define DRV_VERSION	"0.5.3"
 
 /**
  *	hpt3x3_set_piomode		-	PIO setup
@@ -52,6 +52,7 @@ static void hpt3x3_set_piomode(struct ata_port *ap, struct ata_device *adev)
 	pci_write_config_dword(pdev, 0x48, r2);
 }
 
+#if defined(CONFIG_PATA_HPT3X3_DMA)
 /**
  *	hpt3x3_set_dmamode		-	DMA timing setup
  *	@ap: ATA interface
@@ -59,6 +60,9 @@ static void hpt3x3_set_piomode(struct ata_port *ap, struct ata_device *adev)
  *
  *	Set up the channel for MWDMA or UDMA modes. Much the same as with
  *	PIO, load the mode number and then set MWDMA or UDMA flag.
+ *
+ *	0x44 : bit 0-2 master mode, 3-5 slave mode, etc
+ *	0x48 : bit 4/0 DMA/UDMA bit 5/1 for slave etc
  */
 
 static void hpt3x3_set_dmamode(struct ata_port *ap, struct ata_device *adev)
@@ -76,13 +80,26 @@ static void hpt3x3_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 	r2 &= ~(0x11 << dn);	/* Clear MWDMA and UDMA bits */
 
 	if (adev->dma_mode >= XFER_UDMA_0)
-		r2 |= 0x01 << dn;	/* Ultra mode */
+		r2 |= (0x10 << dn);	/* Ultra mode */
 	else
-		r2 |= 0x10 << dn;	/* MWDMA */
+		r2 |= (0x01 << dn);	/* MWDMA */
 
 	pci_write_config_dword(pdev, 0x44, r1);
 	pci_write_config_dword(pdev, 0x48, r2);
 }
+#endif /* CONFIG_PATA_HPT3X3_DMA */
+
+/**
+ *	hpt3x3_atapi_dma	-	ATAPI DMA check
+ *	@qc: Queued command
+ *
+ *	Just say no - we don't do ATAPI DMA
+ */
+
+static int hpt3x3_atapi_dma(struct ata_queued_cmd *qc)
+{
+	return 1;
+}
 
 static struct scsi_host_template hpt3x3_sht = {
 	.module			= THIS_MODULE,
@@ -105,7 +122,9 @@ static struct scsi_host_template hpt3x3_sht = {
 static struct ata_port_operations hpt3x3_port_ops = {
 	.port_disable	= ata_port_disable,
 	.set_piomode	= hpt3x3_set_piomode,
+#if defined(CONFIG_PATA_HPT3X3_DMA)
 	.set_dmamode	= hpt3x3_set_dmamode,
+#endif
 	.mode_filter	= ata_pci_default_filter,
 
 	.tf_load	= ata_tf_load,
@@ -124,6 +143,7 @@ static struct ata_port_operations hpt3x3_port_ops = {
 	.bmdma_start 	= ata_bmdma_start,
 	.bmdma_stop	= ata_bmdma_stop,
 	.bmdma_status 	= ata_bmdma_status,
+	.check_atapi_dma= hpt3x3_atapi_dma,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
@@ -158,32 +178,79 @@ static void hpt3x3_init_chipset(struct pci_dev *dev)
 		pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
 }
 
-
 /**
  *	hpt3x3_init_one		-	Initialise an HPT343/363
- *	@dev: PCI device
+ *	@pdev: PCI device
  *	@id: Entry in match table
  *
- *	Perform basic initialisation. The chip has a quirk that it won't
- *	function unless it is at XX00. The old ATA driver touched this up
- *	but we leave it for pci quirks to do properly.
+ *	Perform basic initialisation. We set the device up so we access all
+ *	ports via BAR4. This is neccessary to work around errata.
  */
 
-static int hpt3x3_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
+	static int printed_version;
 	static const struct ata_port_info info = {
 		.sht = &hpt3x3_sht,
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
+#if defined(CONFIG_PATA_HPT3X3_DMA)
+		/* Further debug needed */
 		.mwdma_mask = 0x07,
 		.udma_mask = 0x07,
+#endif
 		.port_ops = &hpt3x3_port_ops
 	};
+	/* Register offsets of taskfiles in BAR4 area */
+	static const u8 offset_cmd[2] = { 0x20, 0x28 };
+	static const u8 offset_ctl[2] = { 0x36, 0x3E };
 	const struct ata_port_info *ppi[] = { &info, NULL };
-
-	hpt3x3_init_chipset(dev);
-	/* Now kick off ATA set up */
-	return ata_pci_init_one(dev, ppi);
+	struct ata_host *host;
+	int i, rc;
+	void __iomem *base;
+
+	hpt3x3_init_chipset(pdev);
+
+	if (!printed_version++)
+		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
+	if (!host)
+		return -ENOMEM;
+	/* acquire resources and fill host */
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		return rc;
+
+	/* Everything is relative to BAR4 if we set up this way */
+	rc = pcim_iomap_regions(pdev, 1 << 4, DRV_NAME);
+	if (rc == -EBUSY)
+		pcim_pin_device(pdev);
+	if (rc)
+		return rc;
+	host->iomap = pcim_iomap_table(pdev);
+	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+	if (rc)
+		return rc;
+	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+	if (rc)
+		return rc;
+
+	base = host->iomap[4];	/* Bus mastering base */
+
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_ioports *ioaddr = &host->ports[i]->ioaddr;
+
+		ioaddr->cmd_addr = base + offset_cmd[i];
+		ioaddr->altstatus_addr =
+		ioaddr->ctl_addr = base + offset_ctl[i];
+		ioaddr->scr_addr = NULL;
+		ata_std_ports(ioaddr);
+		ioaddr->bmdma_addr = base + 8 * i;
+	}
+	pci_set_master(pdev);
+	return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
+				 &hpt3x3_sht);
 }
 
 #ifdef CONFIG_PM

drivers/ata/pata_mpc52xx.c

@@ -467,13 +467,27 @@ mpc52xx_ata_remove(struct of_device *op)
 static int
 mpc52xx_ata_suspend(struct of_device *op, pm_message_t state)
 {
-	return 0;	/* FIXME : What to do here ? */
+	struct ata_host *host = dev_get_drvdata(&op->dev);
+
+	return ata_host_suspend(host, state);
 }
 
 static int
 mpc52xx_ata_resume(struct of_device *op)
 {
-	return 0;	/* FIXME : What to do here ? */
+	struct ata_host *host = dev_get_drvdata(&op->dev);
+	struct mpc52xx_ata_priv *priv = host->private_data;
+	int rv;
+
+	rv = mpc52xx_ata_hw_init(priv);
+	if (rv) {
+		printk(KERN_ERR DRV_NAME ": Error during HW init\n");
+		return rv;
+	}
+
+	ata_host_resume(host);
+
+	return 0;
 }
 
 #endif

drivers/ata/pata_scc.c

@@ -238,6 +238,12 @@ static void scc_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 	else
 		offset = 0;	/* 100MHz */
 
+	/* errata A308 workaround: limit ATAPI UDMA mode to UDMA4 */
+	if (adev->class == ATA_DEV_ATAPI && speed > XFER_UDMA_4) {
+		printk(KERN_INFO "%s: limit ATAPI UDMA to UDMA4\n", DRV_NAME);
+		speed = XFER_UDMA_4;
+	}
+
 	if (speed >= XFER_UDMA_0)
 		idx = speed - XFER_UDMA_0;
 	else
@@ -724,22 +730,36 @@ static void scc_bmdma_stop (struct ata_queued_cmd *qc)
 
 static u8 scc_bmdma_status (struct ata_port *ap)
 {
-	u8 host_stat;
 	void __iomem *mmio = ap->ioaddr.bmdma_addr;
-
-	host_stat = in_be32(mmio + SCC_DMA_STATUS);
-
-	/* Workaround for PTERADD: emulate DMA_INTR when
-	 * - IDE_STATUS[ERR] = 1
-	 * - INT_STATUS[INTRQ] = 1
-	 * - DMA_STATUS[IORACTA] = 1
-	 */
-	if (!(host_stat & ATA_DMA_INTR)) {
-		u32 int_status = in_be32(mmio + SCC_DMA_INTST);
-		if (ata_altstatus(ap) & ATA_ERR &&
-		    int_status & INTSTS_INTRQ &&
-		    host_stat & ATA_DMA_ACTIVE)
-			host_stat |= ATA_DMA_INTR;
+	u8 host_stat = in_be32(mmio + SCC_DMA_STATUS);
+	u32 int_status = in_be32(mmio + SCC_DMA_INTST);
+	struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
+	static int retry = 0;
+
+	/* return if IOS_SS is cleared */
+	if (!(in_be32(mmio + SCC_DMA_CMD) & ATA_DMA_START))
+		return host_stat;
+
+	/* errata A252,A308 workaround: Step4 */
+	if (ata_altstatus(ap) & ATA_ERR && int_status & INTSTS_INTRQ)
+		return (host_stat | ATA_DMA_INTR);
+
+	/* errata A308 workaround Step5 */
+	if (int_status & INTSTS_IOIRQS) {
+		host_stat |= ATA_DMA_INTR;
+
+		/* We don't check ATAPI DMA because it is limited to UDMA4 */
+		if ((qc->tf.protocol == ATA_PROT_DMA &&
+		     qc->dev->xfer_mode > XFER_UDMA_4)) {
+			if (!(int_status & INTSTS_ACTEINT)) {
+				printk(KERN_WARNING "ata%u: data lost occurred. (ACTEINT==0, retry:%d)\n",
+				       ap->print_id, retry);
+				host_stat |= ATA_DMA_ERR;
+				if (retry++)
+					ap->udma_mask >>= 1;
+			} else
+				retry = 0;
+		}
 	}
 
 	return host_stat;
@@ -892,10 +912,6 @@ static void scc_std_postreset (struct ata_port *ap, unsigned int *classes)
 {
 	DPRINTK("ENTER\n");
 
-	/* re-enable interrupts */
-	if (!ap->ops->error_handler)
-		ap->ops->irq_on(ap);
-
 	/* is double-select really necessary? */
 	if (classes[0] != ATA_DEV_NONE)
 		ap->ops->dev_select(ap, 1);

drivers/ata/pata_sis.c

@@ -149,6 +149,9 @@ static int sis_pre_reset(struct ata_port *ap, unsigned long deadline)
 	if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no]))
 		return -ENOENT;
 
+	/* Clear the FIFO settings. We can't enable the FIFO until
+	   we know we are poking at a disk */
+	pci_write_config_byte(pdev, 0x4B, 0);
 	return ata_std_prereset(ap, deadline);
 }
 

drivers/ata/sata_nv.c

@@ -1560,7 +1560,7 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	}
 
 	ppi[0] = &nv_port_info[type];
-	rc = ata_pci_prepare_native_host(pdev, ppi, &host);
+	rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
 	if (rc)
 		return rc;
 

drivers/ata/sata_promise.c

@@ -45,7 +45,7 @@
 #include "sata_promise.h"
 
 #define DRV_NAME	"sata_promise"
-#define DRV_VERSION	"2.08"
+#define DRV_VERSION	"2.09"
 
 enum {
 	PDC_MAX_PORTS		= 4,
@@ -716,6 +716,9 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance)
 	unsigned int i, tmp;
 	unsigned int handled = 0;
 	void __iomem *mmio_base;
+	unsigned int hotplug_offset, ata_no;
+	u32 hotplug_status;
+	int is_sataii_tx4;
 
 	VPRINTK("ENTER\n");
 
@@ -726,10 +729,20 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance)
 
 	mmio_base = host->iomap[PDC_MMIO_BAR];
 
+	/* read and clear hotplug flags for all ports */
+	if (host->ports[0]->flags & PDC_FLAG_GEN_II)
+		hotplug_offset = PDC2_SATA_PLUG_CSR;
+	else
+		hotplug_offset = PDC_SATA_PLUG_CSR;
+	hotplug_status = readl(mmio_base + hotplug_offset);
+	if (hotplug_status & 0xff)
+		writel(hotplug_status | 0xff, mmio_base + hotplug_offset);
+	hotplug_status &= 0xff;	/* clear uninteresting bits */
+
 	/* reading should also clear interrupts */
 	mask = readl(mmio_base + PDC_INT_SEQMASK);
 
-	if (mask == 0xffffffff) {
+	if (mask == 0xffffffff && hotplug_status == 0) {
 		VPRINTK("QUICK EXIT 2\n");
 		return IRQ_NONE;
 	}
@@ -737,16 +750,34 @@ static irqreturn_t pdc_interrupt (int irq, void *dev_instance)
 	spin_lock(&host->lock);
 
 	mask &= 0xffff;		/* only 16 tags possible */
-	if (!mask) {
+	if (mask == 0 && hotplug_status == 0) {
 		VPRINTK("QUICK EXIT 3\n");
 		goto done_irq;
 	}
 
 	writel(mask, mmio_base + PDC_INT_SEQMASK);
 
+	is_sataii_tx4 = pdc_is_sataii_tx4(host->ports[0]->flags);
+
 	for (i = 0; i < host->n_ports; i++) {
 		VPRINTK("port %u\n", i);
 		ap = host->ports[i];
+
+		/* check for a plug or unplug event */
+		ata_no = pdc_port_no_to_ata_no(i, is_sataii_tx4);
+		tmp = hotplug_status & (0x11 << ata_no);
+		if (tmp && ap &&
+		    !(ap->flags & ATA_FLAG_DISABLED)) {
+			struct ata_eh_info *ehi = &ap->eh_info;
+			ata_ehi_clear_desc(ehi);
+			ata_ehi_hotplugged(ehi);
+			ata_ehi_push_desc(ehi, "hotplug_status %#x", tmp);
+			ata_port_freeze(ap);
+			++handled;
+			continue;
+		}
+
+		/* check for a packet interrupt */
 		tmp = mask & (1 << (i + 1));
 		if (tmp && ap &&
 		    !(ap->flags & ATA_FLAG_DISABLED)) {
@@ -902,9 +933,9 @@ static void pdc_host_init(struct ata_host *host)
 	tmp = readl(mmio + hotplug_offset);
 	writel(tmp | 0xff, mmio + hotplug_offset);
 
-	/* mask plug/unplug ints */
+	/* unmask plug/unplug ints */
 	tmp = readl(mmio + hotplug_offset);
-	writel(tmp | 0xff0000, mmio + hotplug_offset);
+	writel(tmp & ~0xff0000, mmio + hotplug_offset);
 
 	/* don't initialise TBG or SLEW on 2nd generation chips */
 	if (is_gen2)

drivers/ata/sata_sis.c

@@ -334,7 +334,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 		break;
 	}
 
-	rc = ata_pci_prepare_native_host(pdev, ppi, &host);
+	rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
 	if (rc)
 		return rc;
 

drivers/ata/sata_uli.c

@@ -213,7 +213,7 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	host->private_data = hpriv;
 
 	/* the first two ports are standard SFF */
-	rc = ata_pci_init_native_host(host);
+	rc = ata_pci_init_sff_host(host);
 	if (rc)
 		return rc;
 

drivers/ata/sata_via.c

@@ -412,7 +412,7 @@ static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
 	struct ata_host *host;
 	int rc;
 
-	rc = ata_pci_prepare_native_host(pdev, ppi, &host);
+	rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
 	if (rc)
 		return rc;
 	*r_host = host;

include/linux/ata.h

@@ -164,6 +164,8 @@ enum {
 	ATA_CMD_SET_MAX		= 0xF9,
 	ATA_CMD_SET_MAX_EXT	= 0x37,
 	ATA_CMD_READ_LOG_EXT	= 0x2f,
+	ATA_CMD_PMP_READ	= 0xE4,
+	ATA_CMD_PMP_WRITE	= 0xE8,
 
 	/* READ_LOG_EXT pages */
 	ATA_LOG_SATA_NCQ	= 0x10,
@@ -212,6 +214,28 @@ enum {
 						   0=to device, 1=to host */
 	ATAPI_CDB_LEN		= 16,
 
+	/* PMP stuff */
+	SATA_PMP_MAX_PORTS	= 15,
+	SATA_PMP_CTRL_PORT	= 15,
+
+	SATA_PMP_GSCR_DWORDS	= 128,
+	SATA_PMP_GSCR_PROD_ID	= 0,
+	SATA_PMP_GSCR_REV	= 1,
+	SATA_PMP_GSCR_PORT_INFO	= 2,
+	SATA_PMP_GSCR_ERROR	= 32,
+	SATA_PMP_GSCR_ERROR_EN	= 33,
+	SATA_PMP_GSCR_FEAT	= 64,
+	SATA_PMP_GSCR_FEAT_EN	= 96,
+
+	SATA_PMP_PSCR_STATUS	= 0,
+	SATA_PMP_PSCR_ERROR	= 1,
+	SATA_PMP_PSCR_CONTROL	= 2,
+
+	SATA_PMP_FEAT_BIST	= (1 << 0),
+	SATA_PMP_FEAT_PMREQ	= (1 << 1),
+	SATA_PMP_FEAT_DYNSSC	= (1 << 2),
+	SATA_PMP_FEAT_NOTIFY	= (1 << 3),
+
 	/* cable types */
 	ATA_CBL_NONE		= 0,
 	ATA_CBL_PATA40		= 1,
@@ -418,4 +442,9 @@ static inline int lba_48_ok(u64 block, u32 n_block)
 	return ((block + n_block - 1) < ((u64)1 << 48)) && (n_block <= 65536);
 }
 
+#define sata_pmp_gscr_vendor(gscr)	((gscr)[SATA_PMP_GSCR_PROD_ID] & 0xffff)
+#define sata_pmp_gscr_devid(gscr)	((gscr)[SATA_PMP_GSCR_PROD_ID] >> 16)
+#define sata_pmp_gscr_rev(gscr)		(((gscr)[SATA_PMP_GSCR_REV] >> 8) & 0xff)
+#define sata_pmp_gscr_ports(gscr)	((gscr)[SATA_PMP_GSCR_PORT_INFO] & 0xf)
+
 #endif /* __LINUX_ATA_H__ */

include/linux/libata.h

@@ -196,7 +196,6 @@ enum {
 	ATA_PFLAG_SCSI_HOTPLUG	= (1 << 6), /* SCSI hotplug scheduled */
 	ATA_PFLAG_INITIALIZING	= (1 << 7), /* being initialized, don't touch */
 
-	ATA_PFLAG_FLUSH_PORT_TASK = (1 << 16), /* flush port task */
 	ATA_PFLAG_SUSPENDED	= (1 << 17), /* port is suspended (power) */
 	ATA_PFLAG_PM_PENDING	= (1 << 18), /* PM operation pending */
 	ATA_PFLAG_GTM_VALID	= (1 << 19), /* acpi_gtm data valid */
@@ -435,6 +434,7 @@ struct ata_device {
 	struct ata_port		*ap;
 	unsigned int		devno;		/* 0 or 1 */
 	unsigned long		flags;		/* ATA_DFLAG_xxx */
+	unsigned int		horkage;	/* List of broken features */
 	struct scsi_device	*sdev;		/* attached SCSI device */
 #ifdef CONFIG_ATA_ACPI
 	acpi_handle		acpi_handle;
@@ -466,7 +466,6 @@ struct ata_device {
 	/* error history */
 	struct ata_ering	ering;
 	int			spdn_cnt;
-	unsigned int		horkage;	/* List of broken features */
 };
 
 /* Offset into struct ata_device.  Fields above it are maintained
@@ -794,7 +793,6 @@ extern void ata_id_string(const u16 *id, unsigned char *s,
 extern void ata_id_c_string(const u16 *id, unsigned char *s,
 			    unsigned int ofs, unsigned int len);
 extern void ata_id_to_dma_mode(struct ata_device *dev, u8 unknown);
-extern unsigned long ata_device_blacklisted(const struct ata_device *dev);
 extern void ata_bmdma_setup (struct ata_queued_cmd *qc);
 extern void ata_bmdma_start (struct ata_queued_cmd *qc);
 extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
@@ -871,11 +869,11 @@ struct pci_bits {
 	unsigned long		val;
 };
 
-extern int ata_pci_init_native_host(struct ata_host *host);
+extern int ata_pci_init_sff_host(struct ata_host *host);
 extern int ata_pci_init_bmdma(struct ata_host *host);
-extern int ata_pci_prepare_native_host(struct pci_dev *pdev,
-				const struct ata_port_info * const * ppi,
-				struct ata_host **r_host);
+extern int ata_pci_prepare_sff_host(struct pci_dev *pdev,
+				    const struct ata_port_info * const * ppi,
+				    struct ata_host **r_host);
 extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits);
 extern unsigned long ata_pci_default_filter(struct ata_device *, unsigned long);
 #endif /* CONFIG_PCI */