提交 56fa1a6a 编写于 作者: S Sylwester Nawrocki 提交者: Mauro Carvalho Chehab

[media] s5p-fimc: Change the driver directory name to exynos4-is

The s5p-fimc directory now contains drivers for multiple IP blocks
found in multiple Samsung application processors. This includes FIMC
(CAMIF), MIPI CSIS and FIMC LITE. FIMC-IS (Imaging Subsystem) driver
is going to be put into same directory. Hence we rename it to
exynos4-is as s5p-fimc was only relevant for early version of this
driver, when it only supported FIMC IP block.

The imaging subsystem drivers for Exynos4 SoC series and S5PV210 will
be included in drivers/media/platform/exynos4-is directory, with some
modules shared with exynos5 series, while the rest of exynos5 specific
modules will find their home in drivers/media/platform/exynos5-is.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 80f958f4
......@@ -122,7 +122,7 @@ config VIDEO_S3C_CAMIF
will be called s3c-camif.
source "drivers/media/platform/soc_camera/Kconfig"
source "drivers/media/platform/s5p-fimc/Kconfig"
source "drivers/media/platform/exynos4-is/Kconfig"
source "drivers/media/platform/s5p-tv/Kconfig"
endif # V4L_PLATFORM_DRIVERS
......
......@@ -30,7 +30,7 @@ obj-$(CONFIG_VIDEO_SH_VEU) += sh_veu.o
obj-$(CONFIG_VIDEO_MEM2MEM_DEINTERLACE) += m2m-deinterlace.o
obj-$(CONFIG_VIDEO_S3C_CAMIF) += s3c-camif/
obj-$(CONFIG_VIDEO_SAMSUNG_S5P_FIMC) += s5p-fimc/
obj-$(CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS) += exynos4-is/
obj-$(CONFIG_VIDEO_SAMSUNG_S5P_JPEG) += s5p-jpeg/
obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC) += s5p-mfc/
obj-$(CONFIG_VIDEO_SAMSUNG_S5P_TV) += s5p-tv/
......
config VIDEO_SAMSUNG_S5P_FIMC
bool "Samsung S5P/EXYNOS SoC camera interface driver (experimental)"
config VIDEO_SAMSUNG_EXYNOS4_IS
bool "Samsung S5P/EXYNOS4 SoC series Camera Subsystem driver"
depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && PLAT_S5P && PM_RUNTIME
depends on MFD_SYSCON
help
Say Y here to enable camera host interface devices for
Samsung S5P and EXYNOS SoC series.
if VIDEO_SAMSUNG_S5P_FIMC
if VIDEO_SAMSUNG_EXYNOS4_IS
config VIDEO_S5P_FIMC
tristate "S5P/EXYNOS4 FIMC/CAMIF camera interface driver"
......@@ -16,7 +16,7 @@ config VIDEO_S5P_FIMC
select V4L2_MEM2MEM_DEV
help
This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC camera host
interface and video postprocessor (FIMC and FIMC-LITE) devices.
interface and video postprocessor (FIMC) devices.
To compile this driver as a module, choose M here: the
module will be called s5p-fimc.
......
s5p-fimc-objs := fimc-core.o fimc-reg.o fimc-m2m.o fimc-capture.o fimc-mdevice.o
s5p-fimc-objs := fimc-core.o fimc-reg.o fimc-m2m.o fimc-capture.o media-dev.o
exynos-fimc-lite-objs += fimc-lite-reg.o fimc-lite.o
s5p-csis-objs := mipi-csis.o
......
......@@ -27,7 +27,7 @@
#include <media/videobuf2-core.h>
#include <media/videobuf2-dma-contig.h>
#include "fimc-mdevice.h"
#include "media-dev.h"
#include "fimc-core.h"
#include "fimc-reg.h"
......
......@@ -32,7 +32,7 @@
#include "fimc-core.h"
#include "fimc-reg.h"
#include "fimc-mdevice.h"
#include "media-dev.h"
static char *fimc_clocks[MAX_FIMC_CLOCKS] = {
"sclk_fimc", "fimc"
......
......@@ -31,7 +31,7 @@
#include <media/videobuf2-dma-contig.h>
#include <media/s5p_fimc.h>
#include "fimc-mdevice.h"
#include "media-dev.h"
#include "fimc-lite.h"
#include "fimc-lite-reg.h"
......
......@@ -29,8 +29,7 @@
#include "fimc-core.h"
#include "fimc-reg.h"
#include "fimc-mdevice.h"
#include "media-dev.h"
static unsigned int get_m2m_fmt_flags(unsigned int stream_type)
{
......
......@@ -14,7 +14,7 @@
#include <linux/regmap.h>
#include <media/s5p_fimc.h>
#include "fimc-mdevice.h"
#include "media-dev.h"
#include "fimc-reg.h"
#include "fimc-core.h"
......
......@@ -30,9 +30,9 @@
#include <media/media-device.h>
#include <media/s5p_fimc.h>
#include "media-dev.h"
#include "fimc-core.h"
#include "fimc-lite.h"
#include "fimc-mdevice.h"
#include "mipi-csis.h"
static int __fimc_md_set_camclk(struct fimc_md *fmd,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册