Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 56d7b794 编写于 作者: K Kumar Gala
浏览文件
操作

Merge branch '85xx' into for_paulus

上级 ffd84881 23f510bc
隐藏空白更改
内联 并排
Showing with 386 addition and 456 deletion
arch/powerpc/boot/dts/mpc8540ads.dts
浏览文件 @ 56d7b794
......@@ -12,16 +12,14 @@
/ {
model = "MPC8540ADS";
compatible = "MPC85xxADS";
compatible = "MPC8540ADS", "MPC85xxADS";
#address-cells = <1>;
#size-cells = <1>;
linux,phandle = <100>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
linux,phandle = <200>;
PowerPC,8540@0 {
device_type = "cpu";
......@@ -34,13 +32,11 @@
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
32-bit;
linux,phandle = <201>;
};
};
memory {
device_type = "memory";
linux,phandle = <300>;
reg = <00000000 08000000>; // 128M at 0x0
};
......@@ -58,7 +54,7 @@
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <1b 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
dfsrr;
};
......@@ -68,24 +64,20 @@
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
linux,phandle = <24520>;
ethernet-phy@0 {
linux,phandle = <2452000>;
interrupt-parent = <40000>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <35 1>;
reg = <0>;
device_type = "ethernet-phy";
};
ethernet-phy@1 {
linux,phandle = <2452001>;
interrupt-parent = <40000>;
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <35 1>;
reg = <1>;
device_type = "ethernet-phy";
};
ethernet-phy@3 {
linux,phandle = <2452003>;
interrupt-parent = <40000>;
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <37 1>;
reg = <3>;
device_type = "ethernet-phy";
......@@ -102,8 +94,8 @@
address = [ 00 E0 0C 00 73 00 ];
local-mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <d 2 e 2 12 2>;
interrupt-parent = <40000>;
phy-handle = <2452000>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
};
ethernet@25000 {
......@@ -116,8 +108,8 @@
address = [ 00 E0 0C 00 73 01 ];
local-mac-address = [ 00 E0 0C 00 73 01 ];
interrupts = <13 2 14 2 18 2>;
interrupt-parent = <40000>;
phy-handle = <2452001>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
};
ethernet@26000 {
......@@ -130,8 +122,8 @@
address = [ 00 E0 0C 00 73 02 ];
local-mac-address = [ 00 E0 0C 00 73 02 ];
interrupts = <19 2>;
interrupt-parent = <40000>;
phy-handle = <2452003>;
interrupt-parent = <&mpic>;
phy-handle = <&phy3>;
};
serial@4500 {
......@@ -140,7 +132,7 @@
reg = <4500 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <1a 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
};
serial@4600 {
......@@ -149,85 +141,84 @@
reg = <4600 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <1a 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
};
pci@8000 {
linux,phandle = <8000>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x02 */
1000 0 0 1 40000 31 1
1000 0 0 2 40000 32 1
1000 0 0 3 40000 33 1
1000 0 0 4 40000 34 1
1000 0 0 1 &mpic 31 1
1000 0 0 2 &mpic 32 1
1000 0 0 3 &mpic 33 1
1000 0 0 4 &mpic 34 1
/* IDSEL 0x03 */
1800 0 0 1 40000 34 1
1800 0 0 2 40000 31 1
1800 0 0 3 40000 32 1
1800 0 0 4 40000 33 1
1800 0 0 1 &mpic 34 1
1800 0 0 2 &mpic 31 1
1800 0 0 3 &mpic 32 1
1800 0 0 4 &mpic 33 1
/* IDSEL 0x04 */
2000 0 0 1 40000 33 1
2000 0 0 2 40000 34 1
2000 0 0 3 40000 31 1
2000 0 0 4 40000 32 1
2000 0 0 1 &mpic 33 1
2000 0 0 2 &mpic 34 1
2000 0 0 3 &mpic 31 1
2000 0 0 4 &mpic 32 1
/* IDSEL 0x05 */
2800 0 0 1 40000 32 1
2800 0 0 2 40000 33 1
2800 0 0 3 40000 34 1
2800 0 0 4 40000 31 1
2800 0 0 1 &mpic 32 1
2800 0 0 2 &mpic 33 1
2800 0 0 3 &mpic 34 1
2800 0 0 4 &mpic 31 1
/* IDSEL 0x0c */
6000 0 0 1 40000 31 1
6000 0 0 2 40000 32 1
6000 0 0 3 40000 33 1
6000 0 0 4 40000 34 1
6000 0 0 1 &mpic 31 1
6000 0 0 2 &mpic 32 1
6000 0 0 3 &mpic 33 1
6000 0 0 4 &mpic 34 1
/* IDSEL 0x0d */
6800 0 0 1 40000 34 1
6800 0 0 2 40000 31 1
6800 0 0 3 40000 32 1
6800 0 0 4 40000 33 1
6800 0 0 1 &mpic 34 1
6800 0 0 2 &mpic 31 1
6800 0 0 3 &mpic 32 1
6800 0 0 4 &mpic 33 1
/* IDSEL 0x0e */
7000 0 0 1 40000 33 1
7000 0 0 2 40000 34 1
7000 0 0 3 40000 31 1
7000 0 0 4 40000 32 1
7000 0 0 1 &mpic 33 1
7000 0 0 2 &mpic 34 1
7000 0 0 3 &mpic 31 1
7000 0 0 4 &mpic 32 1
/* IDSEL 0x0f */
7800 0 0 1 40000 32 1
7800 0 0 2 40000 33 1
7800 0 0 3 40000 34 1
7800 0 0 4 40000 31 1
7800 0 0 1 &mpic 32 1
7800 0 0 2 &mpic 33 1
7800 0 0 3 &mpic 34 1
7800 0 0 4 &mpic 31 1
/* IDSEL 0x12 */
9000 0 0 1 40000 31 1
9000 0 0 2 40000 32 1
9000 0 0 3 40000 33 1
9000 0 0 4 40000 34 1
9000 0 0 1 &mpic 31 1
9000 0 0 2 &mpic 32 1
9000 0 0 3 &mpic 33 1
9000 0 0 4 &mpic 34 1
/* IDSEL 0x13 */
9800 0 0 1 40000 34 1
9800 0 0 2 40000 31 1
9800 0 0 3 40000 32 1
9800 0 0 4 40000 33 1
9800 0 0 1 &mpic 34 1
9800 0 0 2 &mpic 31 1
9800 0 0 3 &mpic 32 1
9800 0 0 4 &mpic 33 1
/* IDSEL 0x14 */
a000 0 0 1 40000 33 1
a000 0 0 2 40000 34 1
a000 0 0 3 40000 31 1
a000 0 0 4 40000 32 1
a000 0 0 1 &mpic 33 1
a000 0 0 2 &mpic 34 1
a000 0 0 3 &mpic 31 1
a000 0 0 4 &mpic 32 1
/* IDSEL 0x15 */
a800 0 0 1 40000 32 1
a800 0 0 2 40000 33 1
a800 0 0 3 40000 34 1
a800 0 0 4 40000 31 1>;
interrupt-parent = <40000>;
a800 0 0 1 &mpic 32 1
a800 0 0 2 &mpic 33 1
a800 0 0 3 &mpic 34 1
a800 0 0 4 &mpic 31 1>;
interrupt-parent = <&mpic>;
interrupts = <08 2>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 20000000
......@@ -241,8 +232,7 @@
device_type = "pci";
};
pic@40000 {
linux,phandle = <40000>;
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
......
arch/powerpc/boot/dts/mpc8541cds.dts
浏览文件 @ 56d7b794
......@@ -12,16 +12,14 @@
/ {
model = "MPC8541CDS";
compatible = "MPC85xxCDS";
compatible = "MPC8541CDS", "MPC85xxCDS";
#address-cells = <1>;
#size-cells = <1>;
linux,phandle = <100>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
linux,phandle = <200>;
PowerPC,8541@0 {
device_type = "cpu";
......@@ -34,13 +32,11 @@
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
32-bit;
linux,phandle = <201>;
};
};
memory {
device_type = "memory";
linux,phandle = <300>;
reg = <00000000 08000000>; // 128M at 0x0
};
......@@ -58,7 +54,7 @@
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <1b 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
dfsrr;
};
......@@ -68,17 +64,14 @@
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
linux,phandle = <24520>;
ethernet-phy@0 {
linux,phandle = <2452000>;
interrupt-parent = <40000>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <35 0>;
reg = <0>;
device_type = "ethernet-phy";
};
ethernet-phy@1 {
linux,phandle = <2452001>;
interrupt-parent = <40000>;
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <35 0>;
reg = <1>;
device_type = "ethernet-phy";
......@@ -94,8 +87,8 @@
reg = <24000 1000>;
local-mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <d 2 e 2 12 2>;
interrupt-parent = <40000>;
phy-handle = <2452000>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
};
ethernet@25000 {
......@@ -107,8 +100,8 @@
reg = <25000 1000>;
local-mac-address = [ 00 E0 0C 00 73 01 ];
interrupts = <13 2 14 2 18 2>;
interrupt-parent = <40000>;
phy-handle = <2452001>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
};
serial@4500 {
......@@ -117,7 +110,7 @@
reg = <4500 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <1a 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
};
serial@4600 {
......@@ -126,57 +119,56 @@
reg = <4600 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <1a 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
};
pci@8000 {
linux,phandle = <8000>;
pci1: pci@8000 {
interrupt-map-mask = <1f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x10 */
08000 0 0 1 40000 30 1
08000 0 0 2 40000 31 1
08000 0 0 3 40000 32 1
08000 0 0 4 40000 33 1
08000 0 0 1 &mpic 30 1
08000 0 0 2 &mpic 31 1
08000 0 0 3 &mpic 32 1
08000 0 0 4 &mpic 33 1
/* IDSEL 0x11 */
08800 0 0 1 40000 30 1
08800 0 0 2 40000 31 1
08800 0 0 3 40000 32 1
08800 0 0 4 40000 33 1
08800 0 0 1 &mpic 30 1
08800 0 0 2 &mpic 31 1
08800 0 0 3 &mpic 32 1
08800 0 0 4 &mpic 33 1
/* IDSEL 0x12 (Slot 1) */
09000 0 0 1 40000 30 1
09000 0 0 2 40000 31 1
09000 0 0 3 40000 32 1
09000 0 0 4 40000 33 1
09000 0 0 1 &mpic 30 1
09000 0 0 2 &mpic 31 1
09000 0 0 3 &mpic 32 1
09000 0 0 4 &mpic 33 1
/* IDSEL 0x13 (Slot 2) */
09800 0 0 1 40000 31 1
09800 0 0 2 40000 32 1
09800 0 0 3 40000 33 1
09800 0 0 4 40000 30 1
09800 0 0 1 &mpic 31 1
09800 0 0 2 &mpic 32 1
09800 0 0 3 &mpic 33 1
09800 0 0 4 &mpic 30 1
/* IDSEL 0x14 (Slot 3) */
0a000 0 0 1 40000 32 1
0a000 0 0 2 40000 33 1
0a000 0 0 3 40000 30 1
0a000 0 0 4 40000 31 1
0a000 0 0 1 &mpic 32 1
0a000 0 0 2 &mpic 33 1
0a000 0 0 3 &mpic 30 1
0a000 0 0 4 &mpic 31 1
/* IDSEL 0x15 (Slot 4) */
0a800 0 0 1 40000 33 1
0a800 0 0 2 40000 30 1
0a800 0 0 3 40000 31 1
0a800 0 0 4 40000 32 1
0a800 0 0 1 &mpic 33 1
0a800 0 0 2 &mpic 30 1
0a800 0 0 3 &mpic 31 1
0a800 0 0 4 &mpic 32 1
/* Bus 1 (Tundra Bridge) */
/* IDSEL 0x12 (ISA bridge) */
19000 0 0 1 40000 30 1
19000 0 0 2 40000 31 1
19000 0 0 3 40000 32 1
19000 0 0 4 40000 33 1>;
interrupt-parent = <40000>;
19000 0 0 1 &mpic 30 1
19000 0 0 2 &mpic 31 1
19000 0 0 3 &mpic 32 1
19000 0 0 4 &mpic 33 1>;
interrupt-parent = <&mpic>;
interrupts = <08 2>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 20000000
......@@ -200,21 +192,20 @@
compatible = "chrp,iic";
big-endian;
interrupts = <1>;
interrupt-parent = <8000>;
interrupt-parent = <&pci1>;
};
};
pci@9000 {
linux,phandle = <9000>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x15 */
a800 0 0 1 40000 3b 1
a800 0 0 2 40000 3b 1
a800 0 0 3 40000 3b 1
a800 0 0 4 40000 3b 1>;
interrupt-parent = <40000>;
a800 0 0 1 &mpic 3b 1
a800 0 0 2 &mpic 3b 1
a800 0 0 3 &mpic 3b 1
a800 0 0 4 &mpic 3b 1>;
interrupt-parent = <&mpic>;
interrupts = <09 2>;
bus-range = <0 0>;
ranges = <02000000 0 a0000000 a0000000 0 20000000
......@@ -228,8 +219,7 @@
device_type = "pci";
};
pic@40000 {
linux,phandle = <40000>;
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
......
arch/powerpc/boot/dts/mpc8548cds.dts
浏览文件 @ 56d7b794
......@@ -12,16 +12,14 @@
/ {
model = "MPC8548CDS";
compatible = "MPC85xxCDS";
compatible = "MPC8548CDS", "MPC85xxCDS";
#address-cells = <1>;
#size-cells = <1>;
linux,phandle = <100>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
linux,phandle = <200>;
PowerPC,8548@0 {
device_type = "cpu";
......@@ -34,13 +32,11 @@
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
32-bit;
linux,phandle = <201>;
};
};
memory {
device_type = "memory";
linux,phandle = <300>;
reg = <00000000 08000000>; // 128M at 0x0
};
......@@ -58,7 +54,7 @@
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <1b 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
dfsrr;
};
......@@ -68,32 +64,26 @@
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
linux,phandle = <24520>;
ethernet-phy@0 {
linux,phandle = <2452000>;
interrupt-parent = <40000>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <35 0>;
reg = <0>;
device_type = "ethernet-phy";
};
ethernet-phy@1 {
linux,phandle = <2452001>;
interrupt-parent = <40000>;
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <35 0>;
reg = <1>;
device_type = "ethernet-phy";
};
ethernet-phy@2 {
linux,phandle = <2452002>;
interrupt-parent = <40000>;
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <35 0>;
reg = <2>;
device_type = "ethernet-phy";
};
ethernet-phy@3 {
linux,phandle = <2452003>;
interrupt-parent = <40000>;
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <35 0>;
reg = <3>;
device_type = "ethernet-phy";
......@@ -109,8 +99,8 @@
reg = <24000 1000>;
local-mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <d 2 e 2 12 2>;
interrupt-parent = <40000>;
phy-handle = <2452000>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
};
ethernet@25000 {
......@@ -122,10 +112,11 @@
reg = <25000 1000>;
local-mac-address = [ 00 E0 0C 00 73 01 ];
interrupts = <13 2 14 2 18 2>;
interrupt-parent = <40000>;
phy-handle = <2452001>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
};
/* eTSEC 3/4 are currently broken
ethernet@26000 {
#address-cells = <1>;
#size-cells = <0>;
......@@ -135,11 +126,10 @@
reg = <26000 1000>;
local-mac-address = [ 00 E0 0C 00 73 02 ];
interrupts = <f 2 10 2 11 2>;
interrupt-parent = <40000>;
phy-handle = <2452001>;
interrupt-parent = <&mpic>;
phy-handle = <&phy2>;
};
/* eTSEC 4 is currently broken
ethernet@27000 {
#address-cells = <1>;
#size-cells = <0>;
......@@ -149,8 +139,8 @@
reg = <27000 1000>;
local-mac-address = [ 00 E0 0C 00 73 03 ];
interrupts = <15 2 16 2 17 2>;
interrupt-parent = <40000>;
phy-handle = <2452001>;
interrupt-parent = <&mpic>;
phy-handle = <&phy3>;
};
*/
......@@ -160,7 +150,7 @@
reg = <4500 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <1a 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
};
serial@4600 {
......@@ -169,57 +159,56 @@
reg = <4600 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <1a 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
};
pci@8000 {
linux,phandle = <8000>;
pci1: pci@8000 {
interrupt-map-mask = <1f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x10 */
08000 0 0 1 40000 30 1
08000 0 0 2 40000 31 1
08000 0 0 3 40000 32 1
08000 0 0 4 40000 33 1
08000 0 0 1 &mpic 30 1
08000 0 0 2 &mpic 31 1
08000 0 0 3 &mpic 32 1
08000 0 0 4 &mpic 33 1
/* IDSEL 0x11 */
08800 0 0 1 40000 30 1
08800 0 0 2 40000 31 1
08800 0 0 3 40000 32 1
08800 0 0 4 40000 33 1
08800 0 0 1 &mpic 30 1
08800 0 0 2 &mpic 31 1
08800 0 0 3 &mpic 32 1
08800 0 0 4 &mpic 33 1
/* IDSEL 0x12 (Slot 1) */
09000 0 0 1 40000 30 1
09000 0 0 2 40000 31 1
09000 0 0 3 40000 32 1
09000 0 0 4 40000 33 1
09000 0 0 1 &mpic 30 1
09000 0 0 2 &mpic 31 1
09000 0 0 3 &mpic 32 1
09000 0 0 4 &mpic 33 1
/* IDSEL 0x13 (Slot 2) */
09800 0 0 1 40000 31 1
09800 0 0 2 40000 32 1
09800 0 0 3 40000 33 1
09800 0 0 4 40000 30 1
09800 0 0 1 &mpic 31 1
09800 0 0 2 &mpic 32 1
09800 0 0 3 &mpic 33 1
09800 0 0 4 &mpic 30 1
/* IDSEL 0x14 (Slot 3) */
0a000 0 0 1 40000 32 1
0a000 0 0 2 40000 33 1
0a000 0 0 3 40000 30 1
0a000 0 0 4 40000 31 1
0a000 0 0 1 &mpic 32 1
0a000 0 0 2 &mpic 33 1
0a000 0 0 3 &mpic 30 1
0a000 0 0 4 &mpic 31 1
/* IDSEL 0x15 (Slot 4) */
0a800 0 0 1 40000 33 1
0a800 0 0 2 40000 30 1
0a800 0 0 3 40000 31 1
0a800 0 0 4 40000 32 1
0a800 0 0 1 &mpic 33 1
0a800 0 0 2 &mpic 30 1
0a800 0 0 3 &mpic 31 1
0a800 0 0 4 &mpic 32 1
/* Bus 1 (Tundra Bridge) */
/* IDSEL 0x12 (ISA bridge) */
19000 0 0 1 40000 30 1
19000 0 0 2 40000 31 1
19000 0 0 3 40000 32 1
19000 0 0 4 40000 33 1>;
interrupt-parent = <40000>;
19000 0 0 1 &mpic 30 1
19000 0 0 2 &mpic 31 1
19000 0 0 3 &mpic 32 1
19000 0 0 4 &mpic 33 1>;
interrupt-parent = <&mpic>;
interrupts = <08 2>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 20000000
......@@ -243,21 +232,20 @@
compatible = "chrp,iic";
big-endian;
interrupts = <1>;
interrupt-parent = <8000>;
interrupt-parent = <&pci1>;
};
};
pci@9000 {
linux,phandle = <9000>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x15 */
a800 0 0 1 40000 3b 1
a800 0 0 2 40000 3b 1
a800 0 0 3 40000 3b 1
a800 0 0 4 40000 3b 1>;
interrupt-parent = <40000>;
a800 0 0 1 &mpic 3b 1
a800 0 0 2 &mpic 3b 1
a800 0 0 3 &mpic 3b 1
a800 0 0 4 &mpic 3b 1>;
interrupt-parent = <&mpic>;
interrupts = <09 2>;
bus-range = <0 0>;
ranges = <02000000 0 a0000000 a0000000 0 20000000
......@@ -271,8 +259,7 @@
device_type = "pci";
};
pic@40000 {
linux,phandle = <40000>;
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
......
arch/powerpc/boot/dts/mpc8555cds.dts
浏览文件 @ 56d7b794
......@@ -12,16 +12,14 @@
/ {
model = "MPC8555CDS";
compatible = "MPC85xxCDS";
compatible = "MPC8555CDS", "MPC85xxCDS";
#address-cells = <1>;
#size-cells = <1>;
linux,phandle = <100>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
linux,phandle = <200>;
PowerPC,8555@0 {
device_type = "cpu";
......@@ -34,13 +32,11 @@
bus-frequency = <0>; // 166 MHz
clock-frequency = <0>; // 825 MHz, from uboot
32-bit;
linux,phandle = <201>;
};
};
memory {
device_type = "memory";
linux,phandle = <300>;
reg = <00000000 08000000>; // 128M at 0x0
};
......@@ -58,7 +54,7 @@
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <1b 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
dfsrr;
};
......@@ -68,17 +64,14 @@
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
linux,phandle = <24520>;
ethernet-phy@0 {
linux,phandle = <2452000>;
interrupt-parent = <40000>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <35 0>;
reg = <0>;
device_type = "ethernet-phy";
};
ethernet-phy@1 {
linux,phandle = <2452001>;
interrupt-parent = <40000>;
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <35 0>;
reg = <1>;
device_type = "ethernet-phy";
......@@ -94,8 +87,8 @@
reg = <24000 1000>;
local-mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <0d 2 0e 2 12 2>;
interrupt-parent = <40000>;
phy-handle = <2452000>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
};
ethernet@25000 {
......@@ -107,8 +100,8 @@
reg = <25000 1000>;
local-mac-address = [ 00 E0 0C 00 73 01 ];
interrupts = <13 2 14 2 18 2>;
interrupt-parent = <40000>;
phy-handle = <2452001>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
};
serial@4500 {
......@@ -117,7 +110,7 @@
reg = <4500 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <1a 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
};
serial@4600 {
......@@ -126,57 +119,56 @@
reg = <4600 100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <1a 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
};
pci@8000 {
linux,phandle = <8000>;
pci1: pci@8000 {
interrupt-map-mask = <1f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x10 */
08000 0 0 1 40000 30 1
08000 0 0 2 40000 31 1
08000 0 0 3 40000 32 1
08000 0 0 4 40000 33 1
08000 0 0 1 &mpic 30 1
08000 0 0 2 &mpic 31 1
08000 0 0 3 &mpic 32 1
08000 0 0 4 &mpic 33 1
/* IDSEL 0x11 */
08800 0 0 1 40000 30 1
08800 0 0 2 40000 31 1
08800 0 0 3 40000 32 1
08800 0 0 4 40000 33 1
08800 0 0 1 &mpic 30 1
08800 0 0 2 &mpic 31 1
08800 0 0 3 &mpic 32 1
08800 0 0 4 &mpic 33 1
/* IDSEL 0x12 (Slot 1) */
09000 0 0 1 40000 30 1
09000 0 0 2 40000 31 1
09000 0 0 3 40000 32 1
09000 0 0 4 40000 33 1
09000 0 0 1 &mpic 30 1
09000 0 0 2 &mpic 31 1
09000 0 0 3 &mpic 32 1
09000 0 0 4 &mpic 33 1
/* IDSEL 0x13 (Slot 2) */
09800 0 0 1 40000 31 1
09800 0 0 2 40000 32 1
09800 0 0 3 40000 33 1
09800 0 0 4 40000 30 1
09800 0 0 1 &mpic 31 1
09800 0 0 2 &mpic 32 1
09800 0 0 3 &mpic 33 1
09800 0 0 4 &mpic 30 1
/* IDSEL 0x14 (Slot 3) */
0a000 0 0 1 40000 32 1
0a000 0 0 2 40000 33 1
0a000 0 0 3 40000 30 1
0a000 0 0 4 40000 31 1
0a000 0 0 1 &mpic 32 1
0a000 0 0 2 &mpic 33 1
0a000 0 0 3 &mpic 30 1
0a000 0 0 4 &mpic 31 1
/* IDSEL 0x15 (Slot 4) */
0a800 0 0 1 40000 33 1
0a800 0 0 2 40000 30 1
0a800 0 0 3 40000 31 1
0a800 0 0 4 40000 32 1
0a800 0 0 1 &mpic 33 1
0a800 0 0 2 &mpic 30 1
0a800 0 0 3 &mpic 31 1
0a800 0 0 4 &mpic 32 1
/* Bus 1 (Tundra Bridge) */
/* IDSEL 0x12 (ISA bridge) */
19000 0 0 1 40000 30 1
19000 0 0 2 40000 31 1
19000 0 0 3 40000 32 1
19000 0 0 4 40000 33 1>;
interrupt-parent = <40000>;
19000 0 0 1 &mpic 30 1
19000 0 0 2 &mpic 31 1
19000 0 0 3 &mpic 32 1
19000 0 0 4 &mpic 33 1>;
interrupt-parent = <&mpic>;
interrupts = <08 2>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 20000000
......@@ -200,21 +192,20 @@
compatible = "chrp,iic";
big-endian;
interrupts = <1>;
interrupt-parent = <8000>;
interrupt-parent = <&pci1>;
};
};
pci@9000 {
linux,phandle = <9000>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x15 */
a800 0 0 1 40000 3b 1
a800 0 0 2 40000 3b 1
a800 0 0 3 40000 3b 1
a800 0 0 4 40000 3b 1>;
interrupt-parent = <40000>;
a800 0 0 1 &mpic 3b 1
a800 0 0 2 &mpic 3b 1
a800 0 0 3 &mpic 3b 1
a800 0 0 4 &mpic 3b 1>;
interrupt-parent = <&mpic>;
interrupts = <09 2>;
bus-range = <0 0>;
ranges = <02000000 0 a0000000 a0000000 0 20000000
......@@ -228,8 +219,7 @@
device_type = "pci";
};
pic@40000 {
linux,phandle = <40000>;
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
......
arch/powerpc/boot/dts/mpc8560ads.dts
浏览文件 @ 56d7b794
......@@ -12,16 +12,14 @@
/ {
model = "MPC8560ADS";
compatible = "MPC85xxADS";
compatible = "MPC8560ADS", "MPC85xxADS";
#address-cells = <1>;
#size-cells = <1>;
linux,phandle = <100>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
linux,phandle = <200>;
PowerPC,8560@0 {
device_type = "cpu";
......@@ -34,13 +32,11 @@
bus-frequency = <13ab6680>;
clock-frequency = <312c8040>;
32-bit;
linux,phandle = <201>;
};
};
memory {
device_type = "memory";
linux,phandle = <300>;
reg = <00000000 10000000>;
};
......@@ -57,33 +53,28 @@
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
linux,phandle = <24520>;
#address-cells = <1>;
#size-cells = <0>;
ethernet-phy@0 {
linux,phandle = <2452000>;
interrupt-parent = <40000>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <35 1>;
reg = <0>;
device_type = "ethernet-phy";
};
ethernet-phy@1 {
linux,phandle = <2452001>;
interrupt-parent = <40000>;
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <35 1>;
reg = <1>;
device_type = "ethernet-phy";
};
ethernet-phy@2 {
linux,phandle = <2452002>;
interrupt-parent = <40000>;
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <37 1>;
reg = <2>;
device_type = "ethernet-phy";
};
ethernet-phy@3 {
linux,phandle = <2452003>;
interrupt-parent = <40000>;
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <37 1>;
reg = <3>;
device_type = "ethernet-phy";
......@@ -97,8 +88,8 @@
reg = <24000 1000>;
address = [ 00 00 0C 00 00 FD ];
interrupts = <d 2 e 2 12 2>;
interrupt-parent = <40000>;
phy-handle = <2452000>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
};
ethernet@25000 {
......@@ -110,12 +101,11 @@
reg = <25000 1000>;
address = [ 00 00 0C 00 01 FD ];
interrupts = <13 2 14 2 18 2>;
interrupt-parent = <40000>;
phy-handle = <2452001>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
};
pci@8000 {
linux,phandle = <8000>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
......@@ -127,96 +117,94 @@
interrupt-map = <
/* IDSEL 0x2 */
1000 0 0 1 40000 31 1
1000 0 0 2 40000 32 1
1000 0 0 3 40000 33 1
1000 0 0 4 40000 34 1
1000 0 0 1 &mpic 31 1
1000 0 0 2 &mpic 32 1
1000 0 0 3 &mpic 33 1
1000 0 0 4 &mpic 34 1
/* IDSEL 0x3 */
1800 0 0 1 40000 34 1
1800 0 0 2 40000 31 1
1800 0 0 3 40000 32 1
1800 0 0 4 40000 33 1
1800 0 0 1 &mpic 34 1
1800 0 0 2 &mpic 31 1
1800 0 0 3 &mpic 32 1
1800 0 0 4 &mpic 33 1
/* IDSEL 0x4 */
2000 0 0 1 40000 33 1
2000 0 0 2 40000 34 1
2000 0 0 3 40000 31 1
2000 0 0 4 40000 32 1
2000 0 0 1 &mpic 33 1
2000 0 0 2 &mpic 34 1
2000 0 0 3 &mpic 31 1
2000 0 0 4 &mpic 32 1
/* IDSEL 0x5 */
2800 0 0 1 40000 32 1
2800 0 0 2 40000 33 1
2800 0 0 3 40000 34 1
2800 0 0 4 40000 31 1
2800 0 0 1 &mpic 32 1
2800 0 0 2 &mpic 33 1
2800 0 0 3 &mpic 34 1
2800 0 0 4 &mpic 31 1
/* IDSEL 12 */
6000 0 0 1 40000 31 1
6000 0 0 2 40000 32 1
6000 0 0 3 40000 33 1
6000 0 0 4 40000 34 1
6000 0 0 1 &mpic 31 1
6000 0 0 2 &mpic 32 1
6000 0 0 3 &mpic 33 1
6000 0 0 4 &mpic 34 1
/* IDSEL 13 */
6800 0 0 1 40000 34 1
6800 0 0 2 40000 31 1
6800 0 0 3 40000 32 1
6800 0 0 4 40000 33 1
6800 0 0 1 &mpic 34 1
6800 0 0 2 &mpic 31 1
6800 0 0 3 &mpic 32 1
6800 0 0 4 &mpic 33 1
/* IDSEL 14*/
7000 0 0 1 40000 33 1
7000 0 0 2 40000 34 1
7000 0 0 3 40000 31 1
7000 0 0 4 40000 32 1
7000 0 0 1 &mpic 33 1
7000 0 0 2 &mpic 34 1
7000 0 0 3 &mpic 31 1
7000 0 0 4 &mpic 32 1
/* IDSEL 15 */
7800 0 0 1 40000 32 1
7800 0 0 2 40000 33 1
7800 0 0 3 40000 34 1
7800 0 0 4 40000 31 1
7800 0 0 1 &mpic 32 1
7800 0 0 2 &mpic 33 1
7800 0 0 3 &mpic 34 1
7800 0 0 4 &mpic 31 1
/* IDSEL 18 */
9000 0 0 1 40000 31 1
9000 0 0 2 40000 32 1
9000 0 0 3 40000 33 1
9000 0 0 4 40000 34 1
9000 0 0 1 &mpic 31 1
9000 0 0 2 &mpic 32 1
9000 0 0 3 &mpic 33 1
9000 0 0 4 &mpic 34 1
/* IDSEL 19 */
9800 0 0 1 40000 34 1
9800 0 0 2 40000 31 1
9800 0 0 3 40000 32 1
9800 0 0 4 40000 33 1
9800 0 0 1 &mpic 34 1
9800 0 0 2 &mpic 31 1
9800 0 0 3 &mpic 32 1
9800 0 0 4 &mpic 33 1
/* IDSEL 20 */
a000 0 0 1 40000 33 1
a000 0 0 2 40000 34 1
a000 0 0 3 40000 31 1
a000 0 0 4 40000 32 1
a000 0 0 1 &mpic 33 1
a000 0 0 2 &mpic 34 1
a000 0 0 3 &mpic 31 1
a000 0 0 4 &mpic 32 1
/* IDSEL 21 */
a800 0 0 1 40000 32 1
a800 0 0 2 40000 33 1
a800 0 0 3 40000 34 1
a800 0 0 4 40000 31 1>;
a800 0 0 1 &mpic 32 1
a800 0 0 2 &mpic 33 1
a800 0 0 3 &mpic 34 1
a800 0 0 4 &mpic 31 1>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
interrupts = <8 0>;
bus-range = <0 0>;
ranges = <02000000 0 80000000 80000000 0 20000000
01000000 0 00000000 e2000000 0 01000000>;
};
pic@40000 {
linux,phandle = <40000>;
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <40000 20100>;
reg = <40000 40000>;
built-in;
device_type = "open-pic";
};
cpm@e0000000 {
linux,phandle = <e0000000>;
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
......@@ -227,13 +215,12 @@
command-proc = <919c0>;
brg-frequency = <9d5b340>;
pic@90c00 {
linux,phandle = <90c00>;
cpmpic: pic@90c00 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
interrupts = <1e 0>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
reg = <90c00 80>;
built-in;
device_type = "cpm-pic";
......@@ -250,7 +237,7 @@
tx-clock = <1>;
current-speed = <1c200>;
interrupts = <28 8>;
interrupt-parent = <90c00>;
interrupt-parent = <&cpmpic>;
};
scc@91a20 {
......@@ -264,7 +251,7 @@
tx-clock = <2>;
current-speed = <1c200>;
interrupts = <29 8>;
interrupt-parent = <90c00>;
interrupt-parent = <&cpmpic>;
};
fcc@91320 {
......@@ -278,8 +265,8 @@
rx-clock = <15>;
tx-clock = <16>;
interrupts = <21 8>;
interrupt-parent = <90c00>;
phy-handle = <2452002>;
interrupt-parent = <&cpmpic>;
phy-handle = <&phy2>;
};
fcc@91340 {
......@@ -293,8 +280,8 @@
rx-clock = <17>;
tx-clock = <18>;
interrupts = <22 8>;
interrupt-parent = <90c00>;
phy-handle = <2452003>;
interrupt-parent = <&cpmpic>;
phy-handle = <&phy3>;
};
};
};
......
arch/powerpc/boot/dts/mpc8568mds.dts
浏览文件 @ 56d7b794
......@@ -16,16 +16,14 @@
/ {
model = "MPC8568EMDS";
compatible = "MPC85xxMDS";
compatible = "MPC8568EMDS", "MPC85xxMDS";
#address-cells = <1>;
#size-cells = <1>;
linux,phandle = <100>;
cpus {
#cpus = <1>;
#address-cells = <1>;
#size-cells = <0>;
linux,phandle = <200>;
PowerPC,8568@0 {
device_type = "cpu";
......@@ -38,13 +36,11 @@
bus-frequency = <0>;
clock-frequency = <0>;
32-bit;
linux,phandle = <201>;
};
};
memory {
device_type = "memory";
linux,phandle = <300>;
reg = <00000000 10000000>;
};
......@@ -67,7 +63,7 @@
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <1b 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
dfsrr;
};
......@@ -76,7 +72,7 @@
compatible = "fsl-i2c";
reg = <3100 100>;
interrupts = <1b 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
dfsrr;
};
......@@ -86,32 +82,26 @@
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
linux,phandle = <24520>;
ethernet-phy@0 {
linux,phandle = <2452000>;
interrupt-parent = <40000>;
phy0: ethernet-phy@0 {
interrupt-parent = <&mpic>;
interrupts = <31 1>;
reg = <0>;
device_type = "ethernet-phy";
};
ethernet-phy@1 {
linux,phandle = <2452001>;
interrupt-parent = <40000>;
phy1: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <32 1>;
reg = <1>;
device_type = "ethernet-phy";
};
ethernet-phy@2 {
linux,phandle = <2452002>;
interrupt-parent = <40000>;
phy2: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <31 1>;
reg = <2>;
device_type = "ethernet-phy";
};
ethernet-phy@3 {
linux,phandle = <2452003>;
interrupt-parent = <40000>;
phy3: ethernet-phy@3 {
interrupt-parent = <&mpic>;
interrupts = <32 1>;
reg = <3>;
device_type = "ethernet-phy";
......@@ -127,8 +117,8 @@
reg = <24000 1000>;
mac-address = [ 00 00 00 00 00 00 ];
interrupts = <d 2 e 2 12 2>;
interrupt-parent = <40000>;
phy-handle = <2452002>;
interrupt-parent = <&mpic>;
phy-handle = <&phy2>;
};
ethernet@25000 {
......@@ -140,8 +130,8 @@
reg = <25000 1000>;
mac-address = [ 00 00 00 00 00 00];
interrupts = <13 2 14 2 18 2>;
interrupt-parent = <40000>;
phy-handle = <2452003>;
interrupt-parent = <&mpic>;
phy-handle = <&phy3>;
};
serial@4500 {
......@@ -150,7 +140,7 @@
reg = <4500 100>;
clock-frequency = <0>;
interrupts = <1a 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
};
serial@4600 {
......@@ -159,7 +149,7 @@
reg = <4600 100>;
clock-frequency = <0>;
interrupts = <1a 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
};
crypto@30000 {
......@@ -168,15 +158,14 @@
compatible = "talitos";
reg = <30000 f000>;
interrupts = <1d 2>;
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
num-channels = <4>;
channel-fifo-len = <18>;
exec-units-mask = <000000fe>;
descriptor-types-mask = <012b0ebf>;
};
pic@40000 {
linux,phandle = <40000>;
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
......@@ -192,8 +181,7 @@
device_type = "par_io";
num-ports = <7>;
ucc_pin@01 {
linux,phandle = <e010001>;
pio1: ucc_pin@01 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
4 0a 1 0 2 0 /* TxD0 */
......@@ -220,8 +208,7 @@
4 13 1 0 2 0 /* GTX_CLK */
1 1f 2 0 3 0>; /* GTX125 */
};
ucc_pin@02 {
linux,phandle = <e010002>;
pio2: ucc_pin@02 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
5 0a 1 0 2 0 /* TxD0 */
......@@ -277,7 +264,7 @@
compatible = "fsl_spi";
reg = <4c0 40>;
interrupts = <2>;
interrupt-parent = <80>;
interrupt-parent = <&qeic>;
mode = "cpu";
};
......@@ -286,7 +273,7 @@
compatible = "fsl_spi";
reg = <500 40>;
interrupts = <1>;
interrupt-parent = <80>;
interrupt-parent = <&qeic>;
mode = "cpu";
};
......@@ -297,12 +284,12 @@
device-id = <1>;
reg = <2000 200>;
interrupts = <20>;
interrupt-parent = <80>;
interrupt-parent = <&qeic>;
mac-address = [ 00 04 9f 00 23 23 ];
rx-clock = <0>;
tx-clock = <19>;
phy-handle = <212000>;
pio-handle = <e010001>;
phy-handle = <&qe_phy0>;
pio-handle = <&pio1>;
};
ucc@3000 {
......@@ -312,12 +299,12 @@
device-id = <2>;
reg = <3000 200>;
interrupts = <21>;
interrupt-parent = <80>;
interrupt-parent = <&qeic>;
mac-address = [ 00 11 22 33 44 55 ];
rx-clock = <0>;
tx-clock = <14>;
phy-handle = <212001>;
pio-handle = <e010002>;
phy-handle = <&qe_phy1>;
pio-handle = <&pio2>;
};
mdio@2120 {
......@@ -329,33 +316,29 @@
/* These are the same PHYs as on
* gianfar's MDIO bus */
ethernet-phy@00 {
linux,phandle = <212000>;
interrupt-parent = <40000>;
qe_phy0: ethernet-phy@00 {
interrupt-parent = <&mpic>;
interrupts = <31 1>;
reg = <0>;
device_type = "ethernet-phy";
interface = <6>; //ENET_1000_GMII
};
ethernet-phy@01 {
linux,phandle = <212001>;
interrupt-parent = <40000>;
qe_phy1: ethernet-phy@01 {
interrupt-parent = <&mpic>;
interrupts = <32 1>;
reg = <1>;
device_type = "ethernet-phy";
interface = <6>;
};
ethernet-phy@02 {
linux,phandle = <212002>;
interrupt-parent = <40000>;
qe_phy2: ethernet-phy@02 {
interrupt-parent = <&mpic>;
interrupts = <31 1>;
reg = <2>;
device_type = "ethernet-phy";
interface = <6>; //ENET_1000_GMII
};
ethernet-phy@03 {
linux,phandle = <212003>;
interrupt-parent = <40000>;
qe_phy3: ethernet-phy@03 {
interrupt-parent = <&mpic>;
interrupts = <32 1>;
reg = <3>;
device_type = "ethernet-phy";
......@@ -363,8 +346,7 @@
};
};
qeic@80 {
linux,phandle = <80>;
qeic: qeic@80 {
interrupt-controller;
device_type = "qeic";
#address-cells = <0>;
......@@ -373,7 +355,7 @@
built-in;
big-endian;
interrupts = <1e 2 1e 2>; //high:30 low:30
interrupt-parent = <40000>;
interrupt-parent = <&mpic>;
};
};
......
arch/powerpc/configs/mpc8568mds_defconfig
浏览文件 @ 56d7b794
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.20-rc5
# Wed Feb 7 23:54:25 2007
# Linux kernel version: 2.6.20
# Sat Feb 17 16:26:53 2007
#
# CONFIG_PPC64 is not set
CONFIG_PPC32=y
......@@ -34,9 +34,9 @@ CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_83xx is not set
CONFIG_PPC_85xx=y
# CONFIG_PPC_86xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_8xx is not set
# CONFIG_E200 is not set
CONFIG_85xx=y
CONFIG_E500=y
......@@ -63,6 +63,7 @@ CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
......@@ -130,7 +131,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_MPC8540_ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
CONFIG_MPC8568_MDS=y
CONFIG_MPC85xx_MDS=y
CONFIG_MPC85xx=y
CONFIG_PPC_INDIRECT_PCI_BE=y
CONFIG_MPIC=y
......@@ -162,6 +163,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
......@@ -171,6 +173,7 @@ CONFIG_ISA_DMA_API=y
#
# Bus options
#
CONFIG_ZONE_DMA=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_I8259 is not set
CONFIG_PPC_INDIRECT_PCI=y
......@@ -216,6 +219,7 @@ CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
......@@ -301,6 +305,7 @@ CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
#
......@@ -341,7 +346,6 @@ CONFIG_BLK_DEV_INITRD=y
#
# Misc devices
#
# CONFIG_TIFM_CORE is not set
#
# ATA/ATAPI/MFM/RLL support
......@@ -543,6 +547,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
......@@ -698,6 +703,7 @@ CONFIG_FIRMWARE_EDID=y
# HID Devices
#
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
#
# USB support
......@@ -759,6 +765,10 @@ CONFIG_HID=y
# DMA Devices
#
#
# Auxiliary Display support
#
#
# Virtualization
#
......@@ -896,7 +906,8 @@ CONFIG_BITREVERSE=y
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_IOMAP_COPY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
#
# Instrumentation Support
......@@ -914,6 +925,7 @@ CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
......@@ -922,7 +934,6 @@ CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
......@@ -932,6 +943,8 @@ CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_DEBUG_LIST is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUGGER=y
# CONFIG_XMON is not set
# CONFIG_BDI_SWITCH is not set
......@@ -943,6 +956,8 @@ CONFIG_PPC_EARLY_DEBUG=y
# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
#
# Security options
......@@ -970,8 +985,10 @@ CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
......@@ -985,6 +1002,7 @@ CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
#
......
arch/powerpc/platforms/85xx/Kconfig
浏览文件 @ 56d7b794
......@@ -23,12 +23,12 @@ config MPC85xx_CDS
help
This option enables support for the MPC85xx CDS board
config MPC8568_MDS
bool "Freescale MPC8568 MDS"
config MPC85xx_MDS
bool "Freescale MPC85xx MDS"
select DEFAULT_UIMAGE
# select QUICC_ENGINE
help
This option enables support for the MPC8568 MDS board
This option enables support for the MPC85xx MDS board
endchoice
......@@ -47,7 +47,7 @@ config MPC85xx
bool
select PPC_UDBG_16550
select PPC_INDIRECT_PCI
default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS || MPC8568_MDS
default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS || MPC85xx_MDS
config PPC_INDIRECT_PCI_BE
bool
......
arch/powerpc/platforms/85xx/Makefile
浏览文件 @ 56d7b794
......@@ -5,4 +5,4 @@ obj-$(CONFIG_PPC_85xx) += misc.o pci.o
obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o
obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o
obj-$(CONFIG_MPC8568_MDS) += mpc8568_mds.o
obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o
arch/powerpc/platforms/85xx/mpc85xx_ads.c
浏览文件 @ 56d7b794
......@@ -272,10 +272,9 @@ static void mpc85xx_ads_show_cpuinfo(struct seq_file *m)
*/
static int __init mpc85xx_ads_probe(void)
{
/* We always match for now, eventually we should look at the flat
dev tree to ensure this is the board we are suppose to run on
*/
return 1;
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "MPC85xxADS");
}
define_machine(mpc85xx_ads) {
......
arch/powerpc/platforms/85xx/mpc85xx_cds.c
浏览文件 @ 56d7b794
......@@ -291,11 +291,9 @@ static void mpc85xx_cds_show_cpuinfo(struct seq_file *m)
*/
static int __init mpc85xx_cds_probe(void)
{
/* We always match for now, eventually we should look at
* the flat dev tree to ensure this is the board we are
* supposed to run on
*/
return 1;
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "MPC85xxCDS");
}
define_machine(mpc85xx_cds) {
......
arch/powerpc/platforms/85xx/mpc8568_mds.c → arch/powerpc/platforms/85xx/mpc85xx_mds.c
浏览文件 @ 56d7b794
......@@ -8,7 +8,7 @@
* Yin Olivia <Hong-hua.Yin@freescale.com>
*
* Description:
* MPC8568E MDS PB board specific routines.
* MPC85xx MDS board specific routines.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
......@@ -69,14 +69,13 @@ unsigned long isa_mem_base = 0;
* Setup the architecture
*
*/
static void __init mpc8568_mds_setup_arch(void)
static void __init mpc85xx_mds_setup_arch(void)
{
struct device_node *np;
static u8 *bcsr_regs = NULL;
if (ppc_md.progress)
ppc_md.progress("mpc8568_mds_setup_arch()", 0);
ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
np = of_find_node_by_type(NULL, "cpu");
if (np != NULL) {
......@@ -144,26 +143,26 @@ static void __init mpc8568_mds_setup_arch(void)
#endif /* CONFIG_QUICC_ENGINE */
}
static struct of_device_id mpc8568_ids[] = {
static struct of_device_id mpc85xx_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
{ .type = "qe", },
{},
};
static int __init mpc8568_publish_devices(void)
static int __init mpc85xx_publish_devices(void)
{
if (!machine_is(mpc8568_mds))
if (!machine_is(mpc85xx_mds))
return 0;
/* Publish the QE devices */
of_platform_bus_probe(NULL,mpc8568_ids,NULL);
of_platform_bus_probe(NULL,mpc85xx_ids,NULL);
return 0;
}
device_initcall(mpc8568_publish_devices);
device_initcall(mpc85xx_publish_devices);
static void __init mpc8568_mds_pic_init(void)
static void __init mpc85xx_mds_pic_init(void)
{
struct mpic *mpic;
struct resource r;
......@@ -206,7 +205,6 @@ static void __init mpc8568_mds_pic_init(void)
mpic_init(mpic);
#ifdef CONFIG_QUICC_ENGINE
np = of_find_node_by_type(NULL, "qeic");
if (!np)
......@@ -217,27 +215,18 @@ static void __init mpc8568_mds_pic_init(void)
#endif /* CONFIG_QUICC_ENGINE */
}
static int __init mpc8568_mds_probe(void)
static int __init mpc85xx_mds_probe(void)
{
char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
"model", NULL);
if (model == NULL)
return 0;
if (strcmp(model, "MPC8568EMDS"))
return 0;
DBG("MPC8568EMDS found\n");
unsigned long root = of_get_flat_dt_root();
return 1;
return of_flat_dt_is_compatible(root, "MPC85xxMDS");
}
define_machine(mpc8568_mds) {
.name = "MPC8568E MDS",
.probe = mpc8568_mds_probe,
.setup_arch = mpc8568_mds_setup_arch,
.init_IRQ = mpc8568_mds_pic_init,
define_machine(mpc85xx_mds) {
.name = "MPC85xx MDS",
.probe = mpc85xx_mds_probe,
.setup_arch = mpc85xx_mds_setup_arch,
.init_IRQ = mpc85xx_mds_pic_init,
.get_irq = mpic_get_irq,
.restart = mpc85xx_restart,
.calibrate_decr = generic_calibrate_decr,
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或