drm/bridge: sii902x: Allow reset line to be tied to a sleepy GPIO controller

Switch to gpiod_set_value_cansleep() in sii902x_reset().
This is relevant if the reset line is tied to a I2C GPIO
controller.
Signed-off-by: NWadim Egorov <w.egorov@phytec.de>
Reviewed-by: NAndrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: NNeil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221228145704.939801-1-w.egorov@phytec.de

drivers/gpu/drm/bridge/sii902x.c

@@ -239,12 +239,12 @@ static void sii902x_reset(struct sii902x *sii902x)
 	if (!sii902x->reset_gpio)
 		return;
 
-	gpiod_set_value(sii902x->reset_gpio, 1);
+	gpiod_set_value_cansleep(sii902x->reset_gpio, 1);
 
 	/* The datasheet says treset-min = 100us. Make it 150us to be sure. */
 	usleep_range(150, 200);
 
-	gpiod_set_value(sii902x->reset_gpio, 0);
+	gpiod_set_value_cansleep(sii902x->reset_gpio, 0);
 }
 
 static enum drm_connector_status sii902x_detect(struct sii902x *sii902x)