提交 567e9fdd 编写于 作者: J joe@perches.com 提交者: Paul Mackerras

[POWERPC] include/asm-powerpc/: Spelling fixes

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
上级 00d70419
......@@ -123,7 +123,7 @@ typedef struct mem_ctlr {
#define OR_G5LA 0x00000400 /* Output #GPL5 on #GPL_A5 */
#define OR_G5LS 0x00000200 /* Drive #GPL high on falling edge of...*/
#define OR_BI 0x00000100 /* Burst inhibit */
#define OR_SCY_MSK 0x000000f0 /* Cycle Lenght in Clocks */
#define OR_SCY_MSK 0x000000f0 /* Cycle Length in Clocks */
#define OR_SCY_0_CLK 0x00000000 /* 0 clock cycles wait states */
#define OR_SCY_1_CLK 0x00000010 /* 1 clock cycles wait states */
#define OR_SCY_2_CLK 0x00000020 /* 2 clock cycles wait states */
......
......@@ -693,7 +693,7 @@ typedef struct risc_timer_pram {
#define CICR_SCC_SCC3 ((uint)0x00200000) /* SCC3 @ SCCc */
#define CICR_SCB_SCC2 ((uint)0x00040000) /* SCC2 @ SCCb */
#define CICR_SCA_SCC1 ((uint)0x00000000) /* SCC1 @ SCCa */
#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrrupt */
#define CICR_IRL_MASK ((uint)0x0000e000) /* Core interrupt */
#define CICR_HP_MASK ((uint)0x00001f00) /* Hi-pri int. */
#define CICR_IEN ((uint)0x00000080) /* Int. enable */
#define CICR_SPS ((uint)0x00000001) /* SCC Spread */
......
......@@ -78,7 +78,7 @@ extern int HvLpEvent_openPath(HvLpEvent_Type eventType, HvLpIndex lpIndex);
/*
* Close an Lp Event Path for a type and partition
* returns 0 on sucess
* returns 0 on success
*/
extern int HvLpEvent_closePath(HvLpEvent_Type eventType, HvLpIndex lpIndex);
......
......@@ -304,7 +304,7 @@
#define ESR_IMCB 0x20000000 /* Instr. Machine Check - Bus error */
#define ESR_IMCT 0x10000000 /* Instr. Machine Check - Timeout */
#define ESR_PIL 0x08000000 /* Program Exception - Illegal */
#define ESR_PPR 0x04000000 /* Program Exception - Priveleged */
#define ESR_PPR 0x04000000 /* Program Exception - Privileged */
#define ESR_PTR 0x02000000 /* Program Exception - Trap */
#define ESR_FP 0x01000000 /* Floating Point Operation */
#define ESR_DST 0x00800000 /* Storage Exception - Data miss */
......
......@@ -22,7 +22,7 @@
* Partition info commands
*
* These commands are used to retrieve the sdb-partition-XX datas from
* the SMU. The lenght is always 2. First byte is the subcommand code
* the SMU. The length is always 2. First byte is the subcommand code
* and second byte is the partition ID.
*
* The reply is 6 bytes:
......@@ -176,9 +176,9 @@
* data length is that of the string.
*
* The VSLEW command can be used to get or set the voltage slewing.
* - lenght 5 (only "VSLEW") : it returns "DONE" and 3 bytes of
* - length 5 (only "VSLEW") : it returns "DONE" and 3 bytes of
* reply at data offset 6, 7 and 8.
* - lenght 8 ("VSLEWxyz") has 3 additional bytes appended, and is
* - length 8 ("VSLEWxyz") has 3 additional bytes appended, and is
* used to set the voltage slewing point. The SMU replies with "DONE"
* I yet have to figure out their exact meaning of those 3 bytes in
* both cases. They seem to be:
......@@ -688,13 +688,13 @@ struct smu_user_cmd_hdr
__u8 cmd; /* SMU command byte */
__u8 pad[3]; /* padding */
__u32 data_len; /* Lenght of data following */
__u32 data_len; /* Length of data following */
};
struct smu_user_reply_hdr
{
__u32 status; /* Command status */
__u32 reply_len; /* Lenght of data follwing */
__u32 reply_len; /* Length of data follwing */
};
#endif /* _SMU_H */
......@@ -304,7 +304,7 @@ int spu_switch_event_register(struct notifier_block * n);
int spu_switch_event_unregister(struct notifier_block * n);
/*
* This defines the Local Store, Problem Area and Privlege Area of an SPU.
* This defines the Local Store, Problem Area and Privilege Area of an SPU.
*/
union mfc_tag_size_class_cmd {
......
......@@ -194,7 +194,7 @@ struct spu_priv1_collapsed {
};
/*
* struct spu_priv2_collapsed - condensed priviliged 2 area, w/o pads.
* struct spu_priv2_collapsed - condensed privileged 2 area, w/o pads.
*/
struct spu_priv2_collapsed {
u64 slb_index_W;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册