提交 5572da08 编写于 作者: B Benjamin Tissoires 提交者: Jiri Kosina

HID: hid-mulitouch: add support for the 'Sensing Win7-TwoFinger'

Added support for the 'Sensing Win7-TwoFinger' panel by GeneralTouch found on some tablets.

Because of conflicting VID/PID, this conflicts with previous support for some
single-touch panels by GeneralTouch
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: NStéphane Chatty <chatty@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
上级 a3b5e577
......@@ -294,6 +294,7 @@ config HID_MULTITOUCH
Say Y here if you have one of the following devices:
- PixCir touchscreen
- Cypress TrueTouch
- 'Sensing Win7-TwoFinger' panel by GeneralTouch
config HID_NTRIG
tristate "N-Trig touch screen"
......
......@@ -1309,6 +1309,7 @@ static const struct hid_device_id hid_blacklist[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_EZKEY, USB_DEVICE_ID_BTC_8193) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PSX_ADAPTOR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GAMERON, USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0003) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GREENASIA, 0x0012) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) },
......@@ -1614,7 +1615,6 @@ static const struct hid_device_id hid_ignore_list[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_ESSENTIAL_REALITY, USB_DEVICE_ID_ESSENTIAL_REALITY_P5) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC5UH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ETT, USB_DEVICE_ID_TC4UM) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0001) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0002) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0003) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH, 0x0004) },
......
......@@ -228,6 +228,7 @@
#define USB_DEVICE_ID_GAMERON_DUAL_PCS_ADAPTOR 0x0002
#define USB_VENDOR_ID_GENERAL_TOUCH 0x0dfc
#define USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS 0x0001
#define USB_VENDOR_ID_GLAB 0x06c2
#define USB_DEVICE_ID_4_PHIDGETSERVO_30 0x0038
......
......@@ -33,6 +33,7 @@ MODULE_LICENSE("GPL");
#define MT_QUIRK_NOT_SEEN_MEANS_UP (1 << 0)
#define MT_QUIRK_SLOT_IS_CONTACTID (1 << 1)
#define MT_QUIRK_CYPRESS (1 << 2)
#define MT_QUIRK_SLOT_IS_CONTACTNUMBER (1 << 3)
struct mt_slot {
__s32 x, y, p, w, h;
......@@ -63,7 +64,8 @@ struct mt_class {
/* classes of device behavior */
#define MT_CLS_DEFAULT 0
#define MT_CLS_DUAL1 1
#define MT_CLS_CYPRESS 2
#define MT_CLS_DUAL2 2
#define MT_CLS_CYPRESS 3
/*
* these device-dependent functions determine what slot corresponds
......@@ -75,6 +77,11 @@ static int slot_is_contactid(struct mt_device *td)
return td->curdata.contactid;
}
static int slot_is_contactnumber(struct mt_device *td)
{
return td->num_received;
}
static int cypress_compute_slot(struct mt_device *td)
{
if (td->curdata.contactid != 0 || td->num_received == 0)
......@@ -105,6 +112,7 @@ static int find_slot_from_contactid(struct mt_device *td)
struct mt_class mt_classes[] = {
{ 0, 0, 0, 10 }, /* MT_CLS_DEFAULT */
{ MT_QUIRK_SLOT_IS_CONTACTID, 0, 0, 2 }, /* MT_CLS_DUAL1 */
{ MT_QUIRK_SLOT_IS_CONTACTNUMBER, 0, 0, 10 }, /* MT_CLS_DUAL2 */
{ MT_QUIRK_CYPRESS | MT_QUIRK_NOT_SEEN_MEANS_UP, 0, 0, 10 }, /* MT_CLS_CYPRESS */
};
......@@ -237,6 +245,9 @@ static int mt_compute_slot(struct mt_device *td)
if (cls->quirks & MT_QUIRK_CYPRESS)
return cypress_compute_slot(td);
if (cls->quirks & MT_QUIRK_SLOT_IS_CONTACTNUMBER)
return slot_is_contactnumber(td);
return find_slot_from_contactid(td);
}
......@@ -441,6 +452,11 @@ static const struct hid_device_id mt_devices[] = {
HID_USB_DEVICE(USB_VENDOR_ID_CYPRESS,
USB_DEVICE_ID_CYPRESS_TRUETOUCH) },
/* GeneralTouch panel */
{ .driver_data = MT_CLS_DUAL2,
HID_USB_DEVICE(USB_VENDOR_ID_GENERAL_TOUCH,
USB_DEVICE_ID_GENERAL_TOUCH_WIN7_TWOFINGERS) },
/* PixCir-based panels */
{ .driver_data = MT_CLS_DUAL1,
HID_USB_DEVICE(USB_VENDOR_ID_HANVON,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册