rsi: add new device model for 9116

9116 device id entry is added in both SDIO and USB interfaces.
New enumberation value taken for the device model. Based on the
device model detected run time, few device specific operations
needs to be performed.

adding rsi_dev_model to get device type in run time, as we can use
same driver for 9113 and 9116 except few firmware load changes.
Signed-off-by: NSiva Rebbagondla <siva8118@gmail.com>
Signed-off-by: NKalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/rsi/rsi_91x_sdio.c

@@ -949,7 +949,7 @@ static int rsi_probe(struct sdio_func *pfunction,
 {
 	struct rsi_hw *adapter;
 	struct rsi_91x_sdiodev *sdev;
-	int status;
+	int status = -EINVAL;
 
 	rsi_dbg(INIT_ZONE, "%s: Init function called\n", __func__);
 
@@ -968,6 +968,20 @@ static int rsi_probe(struct sdio_func *pfunction,
 		status = -EIO;
 		goto fail_free_adapter;
 	}
+
+	if (pfunction->device == RSI_SDIO_PID_9113) {
+		rsi_dbg(ERR_ZONE, "%s: 9113 module detected\n", __func__);
+		adapter->device_model = RSI_DEV_9113;
+	} else  if (pfunction->device == RSI_SDIO_PID_9116) {
+		rsi_dbg(ERR_ZONE, "%s: 9116 module detected\n", __func__);
+		adapter->device_model = RSI_DEV_9116;
+	} else {
+		rsi_dbg(ERR_ZONE,
+			"%s: Unsupported RSI device id 0x%x\n", __func__,
+			pfunction->device);
+		goto fail_free_adapter;
+	}
+
 	sdev = (struct rsi_91x_sdiodev *)adapter->rsi_dev;
 	rsi_init_event(&sdev->rx_thread.event);
 	status = rsi_create_kthread(adapter->priv, &sdev->rx_thread,
@@ -1415,7 +1429,8 @@ static const struct dev_pm_ops rsi_pm_ops = {
 #endif
 
 static const struct sdio_device_id rsi_dev_table[] =  {
-	{ SDIO_DEVICE(RSI_SDIO_VID_9113, RSI_SDIO_PID_9113) },
+	{ SDIO_DEVICE(RSI_SDIO_VENDOR_ID, RSI_SDIO_PID_9113) },
+	{ SDIO_DEVICE(RSI_SDIO_VENDOR_ID, RSI_SDIO_PID_9116) },
 	{ /* Blank */},
 };
 

drivers/net/wireless/rsi/rsi_91x_usb.c

@@ -763,6 +763,18 @@ static int rsi_probe(struct usb_interface *pfunction,
 
 	rsi_dbg(ERR_ZONE, "%s: Initialized os intf ops\n", __func__);
 
+	if (id && id->idProduct == RSI_USB_PID_9113) {
+		rsi_dbg(INIT_ZONE, "%s: 9113 module detected\n", __func__);
+		adapter->device_model = RSI_DEV_9113;
+	} else if (id && id->idProduct == RSI_USB_PID_9116) {
+		rsi_dbg(INIT_ZONE, "%s: 9116 module detected\n", __func__);
+		adapter->device_model = RSI_DEV_9116;
+	} else {
+		rsi_dbg(ERR_ZONE, "%s: Unsupported RSI device id 0x%x\n",
+			__func__, id->idProduct);
+		goto err1;
+	}
+
 	dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
 
 	status = rsi_usb_reg_read(dev->usbdev, FW_STATUS_REG, &fw_status, 2);
@@ -845,7 +857,8 @@ static int rsi_resume(struct usb_interface *intf)
 #endif
 
 static const struct usb_device_id rsi_dev_table[] = {
-	{ USB_DEVICE(RSI_USB_VID_9113, RSI_USB_PID_9113) },
+	{ USB_DEVICE(RSI_USB_VENDOR_ID, RSI_USB_PID_9113) },
+	{ USB_DEVICE(RSI_USB_VENDOR_ID, RSI_USB_PID_9116) },
 	{ /* Blank */},
 };
 

drivers/net/wireless/rsi/rsi_main.h

@@ -111,9 +111,13 @@ extern __printf(2, 3) void rsi_dbg(u32 zone, const char *fmt, ...);
 #define RSI_WOW_ENABLED			BIT(0)
 #define RSI_WOW_NO_CONNECTION		BIT(1)
 
-#define RSI_DEV_9113		1
 #define RSI_MAX_RX_PKTS		64
 
+enum rsi_dev_model {
+	RSI_DEV_9113 = 0,
+	RSI_DEV_9116
+};
+
 struct version_info {
 	u16 major;
 	u16 minor;
@@ -329,7 +333,7 @@ struct eeprom_read {
 
 struct rsi_hw {
 	struct rsi_common *priv;
-	u8 device_model;
+	enum rsi_dev_model device_model;
 	struct ieee80211_hw *hw;
 	struct ieee80211_vif *vifs[RSI_MAX_VIFS];
 	struct ieee80211_tx_queue_params edca_params[NUM_EDCA_QUEUES];

drivers/net/wireless/rsi/rsi_sdio.h

@@ -28,8 +28,9 @@
 #include <linux/mmc/sdio_ids.h>
 #include "rsi_main.h"
 
-#define RSI_SDIO_VID_9113    0x041B
+#define RSI_SDIO_VENDOR_ID   0x041B
 #define RSI_SDIO_PID_9113    0x9330
+#define RSI_SDIO_PID_9116    0x9116
 
 enum sdio_interrupt_type {
 	BUFFER_FULL         = 0x0,

drivers/net/wireless/rsi/rsi_usb.h

@@ -22,8 +22,9 @@
 #include "rsi_main.h"
 #include "rsi_common.h"
 
-#define RSI_USB_VID_9113	0x1618
+#define RSI_USB_VENDOR_ID	0x1618
 #define RSI_USB_PID_9113	0x9113
+#define RSI_USB_PID_9116	0x9116
 
 #define USB_INTERNAL_REG_1           0x25000
 #define RSI_USB_READY_MAGIC_NUM      0xab