EDAC/amd64: Set memory type per DIMM

mainline inclusion
from mainline-v5.18
commit 75aeaaf2
category: feature
bugzilla: https://gitee.com/openeuler/kernel/issues/I5NGRU
CVE: NA

-------------------------------------------------

Current AMD systems allow mixing of DIMM types within a system. However,
DIMMs within a channel, i.e. managed by a single Unified Memory
Controller (UMC), must be of the same type.

Handle this possible configuration by checking and setting the memory
type for each individual "UMC" structure.
Signed-off-by: NYazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Reviewed-by: NWilliam Roche <william.roche@oracle.com>
Link: https://lore.kernel.org/r/20220202144307.2678405-2-yazen.ghannam@amd.comSigned-off-by: NXie Haocheng <haocheng.xie@amd.com>

drivers/edac/amd64_edac.c

@@ -875,7 +875,7 @@ static void __dump_misc_regs_df(struct amd64_pvt *pvt)
 		edac_dbg(1, "UMC%d x16 DIMMs present: %s\n",
 				i, (umc->dimm_cfg & BIT(7)) ? "yes" : "no");
 
-		if (pvt->dram_type == MEM_LRDDR4) {
+		if (umc->dram_type == MEM_LRDDR4) {
 			amd_smn_read(pvt->mc_node_id, umc_base + UMCCH_ADDR_CFG, &tmp);
 			edac_dbg(1, "UMC%d LRDIMM %dx rank multiply\n",
 					i, 1 << ((tmp >> 4) & 0x3));
@@ -1062,19 +1062,36 @@ static void read_dct_base_mask(struct amd64_pvt *pvt)
 	}
 }
 
-static void determine_memory_type(struct amd64_pvt *pvt)
+static void determine_memory_type_df(struct amd64_pvt *pvt)
 {
-	u32 dram_ctrl, dcsm;
+	struct amd64_umc *umc;
+	u32 i;
 
-	if (pvt->umc) {
-		if ((pvt->umc[0].dimm_cfg | pvt->umc[1].dimm_cfg) & BIT(5))
-			pvt->dram_type = MEM_LRDDR4;
-		else if ((pvt->umc[0].dimm_cfg | pvt->umc[1].dimm_cfg) & BIT(4))
-			pvt->dram_type = MEM_RDDR4;
+	for_each_umc(i) {
+		umc = &pvt->umc[i];
+
+		if (!(umc->sdp_ctrl & UMC_SDP_INIT)) {
+			umc->dram_type = MEM_EMPTY;
+			continue;
+		}
+
+		if (umc->dimm_cfg & BIT(5))
+			umc->dram_type = MEM_LRDDR4;
+		else if (umc->dimm_cfg & BIT(4))
+			umc->dram_type = MEM_RDDR4;
 		else
-			pvt->dram_type = MEM_DDR4;
-		return;
+			umc->dram_type = MEM_DDR4;
+
+		edac_dbg(1, "  UMC%d DIMM type: %s\n", i, edac_mem_types[umc->dram_type]);
 	}
+}
+
+static void determine_memory_type(struct amd64_pvt *pvt)
+{
+	u32 dram_ctrl, dcsm;
+
+	if (pvt->umc)
+		return determine_memory_type_df(pvt);
 
 	switch (pvt->fam) {
 	case 0xf:
@@ -2896,7 +2913,9 @@ static void read_mc_regs(struct amd64_pvt *pvt)
 	read_dct_base_mask(pvt);
 
 	determine_memory_type(pvt);
-	edac_dbg(1, "  DIMM type: %s\n", edac_mem_types[pvt->dram_type]);
+
+	if (!pvt->umc)
+		edac_dbg(1, "  DIMM type: %s\n", edac_mem_types[pvt->dram_type]);
 
 	determine_ecc_sym_sz(pvt);
 }
@@ -2992,7 +3011,7 @@ static int init_csrows_df(struct mem_ctl_info *mci)
 					pvt->mc_node_id, cs);
 
 			dimm->nr_pages = get_csrow_nr_pages(pvt, umc, cs);
-			dimm->mtype = pvt->dram_type;
+			dimm->mtype = pvt->umc[umc].dram_type;
 			dimm->edac_mode = edac_mode;
 			dimm->dtype = dev_type;
 			dimm->grain = 64;

drivers/edac/amd64_edac.h

@@ -341,6 +341,9 @@ struct amd64_umc {
 	u32 sdp_ctrl;		/* SDP Control reg */
 	u32 ecc_ctrl;		/* DRAM ECC Control reg */
 	u32 umc_cap_hi;		/* Capabilities High reg */
+
+	/* cache the dram_type */
+	enum mem_type dram_type;
 };
 
 struct amd64_pvt {
@@ -388,7 +391,12 @@ struct amd64_pvt {
 	/* place to store error injection parameters prior to issue */
 	struct error_injection injection;
 
-	/* cache the dram_type */
+	/*
+	 * cache the dram_type
+	 *
+	 * NOTE: Don't use this for Family 17h and later.
+	 *	 Use dram_type in struct amd64_umc instead.
+	 */
 	enum mem_type dram_type;
 
 	struct amd64_umc *umc;	/* UMC registers */