提交 541eee87 编写于 作者: M Matthew Ranostay 提交者: Jaroslav Kysela

[ALSA] hda: Added more 92HD71 codecs

Added more codecs to the 92HD71 family, as well as support for several
that don't have an analog mixer.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
上级 71685b90
......@@ -528,6 +528,20 @@ static struct hda_verb stac92hd73xx_10ch_core_init[] = {
};
static struct hda_verb stac92hd71bxx_core_init[] = {
/* set master volume and direct control */
{ 0x28, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
/* connect headphone jack to dac1 */
{ 0x0a, AC_VERB_SET_CONNECT_SEL, 0x01},
{ 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, /* Speaker */
/* unmute right and left channels for nodes 0x0a, 0xd, 0x0f */
{ 0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{ 0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
{ 0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
/* unmute mono out node */
{ 0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
};
static struct hda_verb stac92hd71bxx_analog_core_init[] = {
/* set master volume and direct control */
{ 0x28, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
/* connect headphone jack to dac1 */
......@@ -535,6 +549,7 @@ static struct hda_verb stac92hd71bxx_core_init[] = {
/* connect ports 0d and 0f to audio mixer */
{ 0x0d, AC_VERB_SET_CONNECT_SEL, 0x2},
{ 0x0f, AC_VERB_SET_CONNECT_SEL, 0x2},
{ 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
/* unmute dac0 input in audio mixer */
{ 0x17, AC_VERB_SET_AMP_GAIN_MUTE, 0x701f},
/* unmute right and left channels for nodes 0x0a, 0xd, 0x0f */
......@@ -714,7 +729,7 @@ static struct snd_kcontrol_new stac92hd73xx_10ch_mixer[] = {
{ } /* end */
};
static struct snd_kcontrol_new stac92hd71bxx_mixer[] = {
static struct snd_kcontrol_new stac92hd71bxx_analog_mixer[] = {
STAC_DIGITAL_INPUT_SOURCE(1),
STAC_INPUT_SOURCE(2),
......@@ -735,6 +750,25 @@ static struct snd_kcontrol_new stac92hd71bxx_mixer[] = {
{ } /* end */
};
static struct snd_kcontrol_new stac92hd71bxx_mixer[] = {
STAC_DIGITAL_INPUT_SOURCE(1),
STAC_INPUT_SOURCE(2),
STAC_ANALOG_LOOPBACK(0xFA0, 0x7A0, 2),
/* hardware gain controls */
HDA_CODEC_VOLUME_IDX("Digital Mic Volume", 0x0, 0x18, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_IDX("Digital Mic Volume", 0x1, 0x19, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 0x0, 0x1c, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 0x0, 0x1c, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_IDX("Capture Mux Volume", 0x0, 0x1a, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_IDX("Capture Volume", 0x1, 0x1d, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE_IDX("Capture Switch", 0x1, 0x1d, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME_IDX("Capture Mux Volume", 0x1, 0x1b, 0x0, HDA_OUTPUT),
{ } /* end */
};
static struct snd_kcontrol_new stac925x_mixer[] = {
STAC_INPUT_SOURCE(1),
HDA_CODEC_VOLUME("Capture Volume", 0x09, 0, HDA_OUTPUT),
......@@ -3088,12 +3122,25 @@ static int patch_stac92hd71bxx(struct hda_codec *codec)
stac92xx_set_config_regs(codec);
}
switch (codec->vendor_id) {
case 0x111d76b6: /* 4 Port without Analog Mixer */
case 0x111d76b7:
case 0x111d76b4: /* 6 Port without Analog Mixer */
case 0x111d76b5:
spec->mixer = stac92hd71bxx_mixer;
spec->init = stac92hd71bxx_core_init;
break;
default:
spec->mixer = stac92hd71bxx_analog_mixer;
spec->init = stac92hd71bxx_analog_core_init;
}
spec->aloopback_mask = 0x20;
spec->aloopback_shift = 0;
spec->gpio_mask = spec->gpio_data = 0x00000001; /* GPIO0 High = EAPD */
stac92xx_enable_gpio_mask(codec);
spec->init = stac92hd71bxx_core_init;
spec->mixer = stac92hd71bxx_mixer;
spec->mux_nids = stac92hd71bxx_mux_nids;
spec->adc_nids = stac92hd71bxx_adc_nids;
spec->dmic_nids = stac92hd71bxx_dmic_nids;
......@@ -3702,8 +3749,17 @@ struct hda_codec_preset snd_hda_preset_sigmatel[] = {
{ .id = 0x838476a5, .name = "STAC9255D", .patch = patch_stac9205 },
{ .id = 0x838476a6, .name = "STAC9254", .patch = patch_stac9205 },
{ .id = 0x838476a7, .name = "STAC9254D", .patch = patch_stac9205 },
{ .id = 0x111d7674, .name = "92HD73D1X5", .patch = patch_stac92hd73xx },
{ .id = 0x111d7675, .name = "92HD73C1X5", .patch = patch_stac92hd73xx },
{ .id = 0x111d7676, .name = "92HD73E1X5", .patch = patch_stac92hd73xx },
{ .id = 0x111d7675, .name = "92HD73D1X5", .patch = patch_stac92hd73xx },
{ .id = 0x111d76b0, .name = "92HD71BXX", .patch = patch_stac92hd71bxx },
{ .id = 0x111d7608, .name = "92HD71BXX", .patch = patch_stac92hd71bxx },
{ .id = 0x111d76b0, .name = "92HD71B8X", .patch = patch_stac92hd71bxx },
{ .id = 0x111d76b1, .name = "92HD71B8X", .patch = patch_stac92hd71bxx },
{ .id = 0x111d76b2, .name = "92HD71B7X", .patch = patch_stac92hd71bxx },
{ .id = 0x111d76b3, .name = "92HD71B7X", .patch = patch_stac92hd71bxx },
{ .id = 0x111d76b4, .name = "92HD71B6X", .patch = patch_stac92hd71bxx },
{ .id = 0x111d76b5, .name = "92HD71B6X", .patch = patch_stac92hd71bxx },
{ .id = 0x111d76b6, .name = "92HD71B5X", .patch = patch_stac92hd71bxx },
{ .id = 0x111d76b7, .name = "92HD71B5X", .patch = patch_stac92hd71bxx },
{} /* terminator */
};
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册