USB: add USB serial ssu100 driver

Add support for the Quatech SSU-100 single port usb to serial device.
This driver is based on the ftdi_sio.c driver and the original
serqt_usb driver from Quatech.
Signed-off-by: NBill Pemberton <wfp5p@virginia.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers/usb/serial/Kconfig

@@ -642,6 +642,15 @@ config USB_SERIAL_ZIO
 	  To compile this driver as a module, choose M here: the
 	  module will be called zio.
 
+config USB_SERIAL_SSU100
+	tristate "USB Quatech SSU-100 Single Port Serial Driver"
+	help
+	  Say Y here if you want to use the Quatech SSU-100 single
+	  port usb to serial adapter.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ssu100.
+
 config USB_SERIAL_DEBUG
 	tristate "USB Debugging Device"
 	help

drivers/usb/serial/Makefile

@@ -51,6 +51,7 @@ obj-$(CONFIG_USB_SERIAL_SAFE)			+= safe_serial.o
 obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI)		+= siemens_mpi.o
 obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS)		+= sierra.o
 obj-$(CONFIG_USB_SERIAL_SPCP8X5)		+= spcp8x5.o
+obj-$(CONFIG_USB_SERIAL_SSU100)			+= ssu100.o
 obj-$(CONFIG_USB_SERIAL_SYMBOL)			+= symbolserial.o
 obj-$(CONFIG_USB_SERIAL_WWAN)			+= usb_wwan.o
 obj-$(CONFIG_USB_SERIAL_TI)			+= ti_usb_3410_5052.o

drivers/usb/serial/ssu100.c

+/*
+ * usb-serial driver for Quatech SSU-100
+ *
+ * based on ftdi_sio.c and the original serqt_usb.c from Quatech
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/serial.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/uaccess.h>
+
+#define QT_OPEN_CLOSE_CHANNEL       0xca
+#define QT_SET_GET_DEVICE           0xc2
+#define QT_SET_GET_REGISTER         0xc0
+#define QT_GET_SET_PREBUF_TRIG_LVL  0xcc
+#define QT_SET_ATF                  0xcd
+#define QT_GET_SET_UART             0xc1
+#define QT_TRANSFER_IN              0xc0
+#define QT_HW_FLOW_CONTROL_MASK     0xc5
+#define QT_SW_FLOW_CONTROL_MASK     0xc6
+
+#define MODEM_CTL_REGISTER         0x04
+#define MODEM_STATUS_REGISTER      0x06
+
+
+#define SERIAL_LSR_OE       0x02
+#define SERIAL_LSR_PE       0x04
+#define SERIAL_LSR_FE       0x08
+#define SERIAL_LSR_BI       0x10
+
+#define SERIAL_LSR_TEMT     0x40
+
+#define  SERIAL_MCR_DTR             0x01
+#define  SERIAL_MCR_RTS             0x02
+#define  SERIAL_MCR_LOOP            0x10
+
+#define  SERIAL_MSR_CTS             0x10
+#define  SERIAL_MSR_CD              0x80
+#define  SERIAL_MSR_RI              0x40
+#define  SERIAL_MSR_DSR             0x20
+#define  SERIAL_MSR_MASK            0xf0
+
+#define  SERIAL_CRTSCTS ((SERIAL_MCR_RTS << 8) | SERIAL_MSR_CTS)
+
+#define  SERIAL_8_DATA              0x03
+#define  SERIAL_7_DATA              0x02
+#define  SERIAL_6_DATA              0x01
+#define  SERIAL_5_DATA              0x00
+
+#define  SERIAL_ODD_PARITY          0X08
+#define  SERIAL_EVEN_PARITY         0X18
+
+#define  MAX_BAUD_RATE              460800
+
+#define ATC_DISABLED                0x00
+#define DUPMODE_BITS        0xc0
+#define RR_BITS             0x03
+#define LOOPMODE_BITS       0x41
+#define RS232_MODE          0x00
+#define RTSCTS_TO_CONNECTOR 0x40
+#define CLKS_X4             0x02
+#define FULLPWRBIT          0x00000080
+#define NEXT_BOARD_POWER_BIT        0x00000004
+
+static int debug = 1;
+
+/* Version Information */
+#define DRIVER_VERSION "v0.1"
+#define DRIVER_DESC "Quatech SSU-100 USB to Serial Driver"
+
+#define	USB_VENDOR_ID_QUATECH	0x061d	/* Quatech VID */
+#define QUATECH_SSU100	0xC020	/* SSU100 */
+
+static const struct usb_device_id id_table[] = {
+	{USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU100)},
+	{}			/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+
+static struct usb_driver ssu100_driver = {
+	.name			       = "ssu100",
+	.probe			       = usb_serial_probe,
+	.disconnect		       = usb_serial_disconnect,
+	.id_table		       = id_table,
+	.suspend		       = usb_serial_suspend,
+	.resume			       = usb_serial_resume,
+	.no_dynamic_id		       = 1,
+	.supports_autosuspend	       = 1,
+};
+
+struct ssu100_port_private {
+	u8 shadowLSR;
+	u8 shadowMSR;
+	wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
+	unsigned short max_packet_size;
+};
+
+static void ssu100_release(struct usb_serial *serial)
+{
+	struct ssu100_port_private *priv = usb_get_serial_port_data(*serial->port);
+
+	dbg("%s", __func__);
+	kfree(priv);
+}
+
+static inline int ssu100_control_msg(struct usb_device *dev,
+				     u8 request, u16 data, u16 index)
+{
+	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			       request, 0x40, data, index,
+			       NULL, 0, 300);
+}
+
+static inline int ssu100_setdevice(struct usb_device *dev, u8 *data)
+{
+	u16 x = ((u16)(data[1] << 8) | (u16)(data[0]));
+
+	return ssu100_control_msg(dev, QT_SET_GET_DEVICE, x, 0);
+}
+
+
+static inline int ssu100_getdevice(struct usb_device *dev, u8 *data)
+{
+	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			       QT_SET_GET_DEVICE, 0xc0, 0, 0,
+			       data, 3, 300);
+}
+
+static inline int ssu100_getregister(struct usb_device *dev,
+				     unsigned short uart,
+				     unsigned short reg,
+				     u8 *data)
+{
+	return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			       QT_SET_GET_REGISTER, 0xc0, reg,
+			       uart, data, sizeof(*data), 300);
+
+}
+
+
+static inline int ssu100_setregister(struct usb_device *dev,
+				     unsigned short uart,
+				     u16 data)
+{
+	u16 value = (data << 8) | MODEM_CTL_REGISTER;
+
+	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			       QT_SET_GET_REGISTER, 0x40, value, uart,
+			       NULL, 0, 300);
+
+}
+
+#define set_mctrl(dev, set)		update_mctrl((dev), (set), 0)
+#define clear_mctrl(dev, clear)	update_mctrl((dev), 0, (clear))
+
+/* these do not deal with device that have more than 1 port */
+static inline int update_mctrl(struct usb_device *dev, unsigned int set,
+			       unsigned int clear)
+{
+	unsigned urb_value;
+	int result;
+
+	if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
+		dbg("%s - DTR|RTS not being set|cleared", __func__);
+		return 0;	/* no change */
+	}
+
+	clear &= ~set;	/* 'set' takes precedence over 'clear' */
+	urb_value = 0;
+	if (set & TIOCM_DTR)
+		urb_value |= SERIAL_MCR_DTR;
+	if (set & TIOCM_RTS)
+		urb_value |= SERIAL_MCR_RTS;
+
+	result = ssu100_setregister(dev, 0, urb_value);
+	if (result < 0)
+		dbg("%s Error from MODEM_CTRL urb", __func__);
+
+	return result;
+}
+
+static int ssu100_initdevice(struct usb_device *dev)
+{
+	u8 *data;
+	int result = 0;
+
+	dbg("%s", __func__);
+
+	data = kzalloc(3, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	result = ssu100_getdevice(dev, data);
+	if (result < 0) {
+		dbg("%s - get_device failed %i", __func__, result);
+		goto out;
+	}
+
+	data[1] &= ~FULLPWRBIT;
+
+	result = ssu100_setdevice(dev, data);
+	if (result < 0) {
+		dbg("%s - setdevice failed %i", __func__, result);
+		goto out;
+	}
+
+	result = ssu100_control_msg(dev, QT_GET_SET_PREBUF_TRIG_LVL, 128, 0);
+	if (result < 0) {
+		dbg("%s - set prebuffer level failed %i", __func__, result);
+		goto out;
+	}
+
+	result = ssu100_control_msg(dev, QT_SET_ATF, ATC_DISABLED, 0);
+	if (result < 0) {
+		dbg("%s - set ATFprebuffer level failed %i", __func__, result);
+		goto out;
+	}
+
+	result = ssu100_getdevice(dev, data);
+	if (result < 0) {
+		dbg("%s - get_device failed %i", __func__, result);
+		goto out;
+	}
+
+	data[0] &= ~(RR_BITS | DUPMODE_BITS);
+	data[0] |= CLKS_X4;
+	data[1] &= ~(LOOPMODE_BITS);
+	data[1] |= RS232_MODE;
+
+	result = ssu100_setdevice(dev, data);
+	if (result < 0) {
+		dbg("%s - setdevice failed %i", __func__, result);
+		goto out;
+	}
+
+out:	kfree(data);
+	return result;
+
+}
+
+
+static void ssu100_set_termios(struct tty_struct *tty,
+			       struct usb_serial_port *port,
+			       struct ktermios *old_termios)
+{
+	struct usb_device *dev = port->serial->dev;
+	struct ktermios *termios = tty->termios;
+	u16 baud, divisor, remainder;
+	unsigned int cflag = termios->c_cflag;
+	u16 urb_value = 0; /* will hold the new flags */
+	int result;
+
+	dbg("%s", __func__);
+
+	if (cflag & PARENB) {
+		if (cflag & PARODD)
+			urb_value |= SERIAL_ODD_PARITY;
+		else
+			urb_value |= SERIAL_EVEN_PARITY;
+	}
+
+	switch (cflag & CSIZE) {
+	case CS5:
+		urb_value |= SERIAL_5_DATA;
+		break;
+	case CS6:
+		urb_value |= SERIAL_6_DATA;
+		break;
+	case CS7:
+		urb_value |= SERIAL_7_DATA;
+		break;
+	default:
+	case CS8:
+		urb_value |= SERIAL_8_DATA;
+		break;
+	}
+
+	baud = tty_get_baud_rate(tty);
+	if (!baud)
+		baud = 9600;
+
+	dbg("%s - got baud = %d\n", __func__, baud);
+
+
+	divisor = MAX_BAUD_RATE / baud;
+	remainder = MAX_BAUD_RATE % baud;
+	if (((remainder * 2) >= baud) && (baud != 110))
+		divisor++;
+
+	urb_value = urb_value << 8;
+
+	result = ssu100_control_msg(dev, QT_GET_SET_UART, divisor, urb_value);
+	if (result < 0)
+		dbg("%s - set uart failed", __func__);
+
+	if (cflag & CRTSCTS)
+		result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK,
+					    SERIAL_CRTSCTS, 0);
+	else
+		result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK,
+					    0, 0);
+	if (result < 0)
+		dbg("%s - set HW flow control failed", __func__);
+
+	if (I_IXOFF(tty) || I_IXON(tty)) {
+		u16 x = ((u16)(START_CHAR(tty) << 8) | (u16)(STOP_CHAR(tty)));
+
+		result = ssu100_control_msg(dev, QT_SW_FLOW_CONTROL_MASK,
+					    x, 0);
+	} else
+		result = ssu100_control_msg(dev, QT_SW_FLOW_CONTROL_MASK,
+					    0, 0);
+
+	if (result < 0)
+		dbg("%s - set SW flow control failed", __func__);
+
+}
+
+
+static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+	struct usb_device *dev = port->serial->dev;
+	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
+	u8 *data;
+	int result;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	data = kzalloc(2, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+				 QT_OPEN_CLOSE_CHANNEL,
+				 QT_TRANSFER_IN, 0x01,
+				 0, data, 2, 300);
+	if (result < 0) {
+		dbg("%s - open failed %i", __func__, result);
+		kfree(data);
+		return result;
+	}
+
+	priv->shadowLSR = data[0]  & (SERIAL_LSR_OE | SERIAL_LSR_PE |
+				      SERIAL_LSR_FE | SERIAL_LSR_BI);
+
+	priv->shadowMSR = data[1]  & (SERIAL_MSR_CTS | SERIAL_MSR_DSR |
+				      SERIAL_MSR_RI | SERIAL_MSR_CD);
+
+	kfree(data);
+
+/* set to 9600 */
+	result = ssu100_control_msg(dev, QT_GET_SET_UART, 0x30, 0x0300);
+	if (result < 0)
+		dbg("%s - set uart failed", __func__);
+
+	if (tty)
+		ssu100_set_termios(tty, port, tty->termios);
+
+	return usb_serial_generic_open(tty, port);
+}
+
+static void ssu100_close(struct usb_serial_port *port)
+{
+	dbg("%s", __func__);
+	usb_serial_generic_close(port);
+}
+
+static int get_serial_info(struct usb_serial_port *port,
+			   struct serial_struct __user *retinfo)
+{
+	struct serial_struct tmp;
+
+	if (!retinfo)
+		return -EFAULT;
+
+	memset(&tmp, 0, sizeof(tmp));
+	tmp.line		= port->serial->minor;
+	tmp.port		= 0;
+	tmp.irq			= 0;
+	tmp.flags		= ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
+	tmp.xmit_fifo_size	= port->bulk_out_size;
+	tmp.baud_base		= 9600;
+	tmp.close_delay		= 5*HZ;
+	tmp.closing_wait	= 30*HZ;
+
+	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
+		return -EFAULT;
+	return 0;
+}
+
+static int ssu100_ioctl(struct tty_struct *tty, struct file *file,
+		    unsigned int cmd, unsigned long arg)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
+
+	dbg("%s cmd 0x%04x", __func__, cmd);
+
+	switch (cmd) {
+	case TIOCGSERIAL:
+		return get_serial_info(port,
+				       (struct serial_struct __user *) arg);
+
+	case TIOCMIWAIT:
+		while (priv != NULL) {
+			u8 prevMSR = priv->shadowMSR & SERIAL_MSR_MASK;
+			interruptible_sleep_on(&priv->delta_msr_wait);
+			/* see if a signal did it */
+			if (signal_pending(current))
+				return -ERESTARTSYS;
+			else {
+				u8 diff = (priv->shadowMSR & SERIAL_MSR_MASK) ^ prevMSR;
+				if (!diff)
+					return -EIO; /* no change => error */
+
+				/* Return 0 if caller wanted to know about
+				   these bits */
+
+				if (((arg & TIOCM_RNG) && (diff & SERIAL_MSR_RI)) ||
+				    ((arg & TIOCM_DSR) && (diff & SERIAL_MSR_DSR)) ||
+				    ((arg & TIOCM_CD) && (diff & SERIAL_MSR_CD)) ||
+				    ((arg & TIOCM_CTS) && (diff & SERIAL_MSR_CTS)))
+					return 0;
+			}
+		}
+		return 0;
+
+	default:
+		break;
+	}
+
+	dbg("%s arg not supported", __func__);
+
+	return -ENOIOCTLCMD;
+}
+
+static void ssu100_set_max_packet_size(struct usb_serial_port *port)
+{
+	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
+	struct usb_serial *serial = port->serial;
+	struct usb_device *udev = serial->dev;
+
+	struct usb_interface *interface = serial->interface;
+	struct usb_endpoint_descriptor *ep_desc = &interface->cur_altsetting->endpoint[1].desc;
+
+	unsigned num_endpoints;
+	int i;
+
+	num_endpoints = interface->cur_altsetting->desc.bNumEndpoints;
+	dev_info(&udev->dev, "Number of endpoints %d\n", num_endpoints);
+
+	for (i = 0; i < num_endpoints; i++) {
+		dev_info(&udev->dev, "Endpoint %d MaxPacketSize %d\n", i+1,
+			interface->cur_altsetting->endpoint[i].desc.wMaxPacketSize);
+		ep_desc = &interface->cur_altsetting->endpoint[i].desc;
+	}
+
+	/* set max packet size based on descriptor */
+	priv->max_packet_size = ep_desc->wMaxPacketSize;
+
+	dev_info(&udev->dev, "Setting MaxPacketSize %d\n", priv->max_packet_size);
+}
+
+static int ssu100_attach(struct usb_serial *serial)
+{
+	struct ssu100_port_private *priv;
+	struct usb_serial_port *port = *serial->port;
+
+	dbg("%s", __func__);
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__,
+			sizeof(*priv));
+		return -ENOMEM;
+	}
+
+	init_waitqueue_head(&priv->delta_msr_wait);
+	usb_set_serial_port_data(port, priv);
+
+	ssu100_set_max_packet_size(port);
+
+	return ssu100_initdevice(serial->dev);
+}
+
+static int ssu100_tiocmget(struct tty_struct *tty, struct file *file)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_device *dev = port->serial->dev;
+	u8 *d;
+	int r;
+
+	dbg("%s\n", __func__);
+
+	d = kzalloc(2, GFP_KERNEL);
+	if (!d)
+		return -ENOMEM;
+
+	r = ssu100_getregister(dev, 0, MODEM_CTL_REGISTER, d);
+	if (r < 0)
+		goto mget_out;
+
+	r = ssu100_getregister(dev, 0, MODEM_STATUS_REGISTER, d+1);
+	if (r < 0)
+		goto mget_out;
+
+	r = (d[0] & SERIAL_MCR_DTR ? TIOCM_DTR : 0) |
+		(d[0] & SERIAL_MCR_RTS ? TIOCM_RTS : 0) |
+		(d[1] & SERIAL_MSR_CTS ? TIOCM_CTS : 0) |
+		(d[1] & SERIAL_MSR_CD ? TIOCM_CAR : 0) |
+		(d[1] & SERIAL_MSR_RI ? TIOCM_RI : 0) |
+		(d[1] & SERIAL_MSR_DSR ? TIOCM_DSR : 0);
+
+mget_out:
+	kfree(d);
+	return r;
+}
+
+static int ssu100_tiocmset(struct tty_struct *tty, struct file *file,
+			   unsigned int set, unsigned int clear)
+{
+	struct usb_serial_port *port = tty->driver_data;
+	struct usb_device *dev = port->serial->dev;
+
+	dbg("%s\n", __func__);
+	return update_mctrl(dev, set, clear);
+}
+
+static void ssu100_dtr_rts(struct usb_serial_port *port, int on)
+{
+	struct usb_device *dev = port->serial->dev;
+
+	dbg("%s\n", __func__);
+
+	mutex_lock(&port->serial->disc_mutex);
+	if (!port->serial->disconnected) {
+		/* Disable flow control */
+		if (!on &&
+		    ssu100_setregister(dev, 0, 0) < 0)
+			dev_err(&port->dev, "error from flowcontrol urb\n");
+		/* drop RTS and DTR */
+		if (on)
+			set_mctrl(dev, TIOCM_DTR | TIOCM_RTS);
+		else
+			clear_mctrl(dev, TIOCM_DTR | TIOCM_RTS);
+	}
+	mutex_unlock(&port->serial->disc_mutex);
+}
+
+static int ssu100_process_packet(struct tty_struct *tty,
+				 struct usb_serial_port *port,
+				 struct ssu100_port_private *priv,
+				 char *packet, int len)
+{
+	int i;
+	char flag;
+	char *ch;
+
+	dbg("%s - port %d", __func__, port->number);
+
+	if (len < 4) {
+		dbg("%s - malformed packet", __func__);
+		return 0;
+	}
+
+	if ((packet[0] == 0x1b) && (packet[1] == 0x1b) &&
+	    ((packet[2] == 0x00) || (packet[2] == 0x01))) {
+		if (packet[2] == 0x00)
+			priv->shadowLSR = packet[3] & (SERIAL_LSR_OE |
+						       SERIAL_LSR_PE |
+						       SERIAL_LSR_FE |
+						       SERIAL_LSR_BI);
+
+		if (packet[2] == 0x01) {
+			priv->shadowMSR = packet[3];
+			wake_up_interruptible(&priv->delta_msr_wait);
+		}
+
+		len -= 4;
+		ch = packet + 4;
+	} else
+		ch = packet;
+
+	if (!len)
+		return 0;	/* status only */
+
+	if (port->port.console && port->sysrq) {
+		for (i = 0; i < len; i++, ch++) {
+			if (!usb_serial_handle_sysrq_char(tty, port, *ch))
+				tty_insert_flip_char(tty, *ch, flag);
+		}
+	} else
+		tty_insert_flip_string_fixed_flag(tty, ch, flag, len);
+
+	return len;
+}
+
+static void ssu100_process_read_urb(struct urb *urb)
+{
+	struct usb_serial_port *port = urb->context;
+	struct ssu100_port_private *priv = usb_get_serial_port_data(port);
+	char *data = (char *)urb->transfer_buffer;
+	struct tty_struct *tty;
+	int count = 0;
+	int i;
+	int len;
+
+	dbg("%s", __func__);
+
+	tty = tty_port_tty_get(&port->port);
+	if (!tty)
+		return;
+
+	for (i = 0; i < urb->actual_length; i += priv->max_packet_size) {
+		len = min_t(int, urb->actual_length - i, priv->max_packet_size);
+		count += ssu100_process_packet(tty, port, priv, &data[i], len);
+	}
+
+	if (count)
+		tty_flip_buffer_push(tty);
+	tty_kref_put(tty);
+}
+
+
+static struct usb_serial_driver ssu100_device = {
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "ssu100",
+	},
+	.description	     = DRIVER_DESC,
+	.id_table	     = id_table,
+	.usb_driver	     = &ssu100_driver,
+	.num_ports	     = 1,
+	.bulk_in_size        = 256,
+	.bulk_out_size       = 256,
+	.open		     = ssu100_open,
+	.close		     = ssu100_close,
+	.attach              = ssu100_attach,
+	.release             = ssu100_release,
+	.dtr_rts             = ssu100_dtr_rts,
+	.process_read_urb    = ssu100_process_read_urb,
+	.tiocmget            = ssu100_tiocmget,
+	.tiocmset            = ssu100_tiocmset,
+	.ioctl               = ssu100_ioctl,
+	.set_termios         = ssu100_set_termios,
+};
+
+static int __init ssu100_init(void)
+{
+	int retval;
+
+	dbg("%s", __func__);
+
+	/* register with usb-serial */
+	retval = usb_serial_register(&ssu100_device);
+
+	if (retval)
+		goto failed_usb_sio_register;
+
+	retval = usb_register(&ssu100_driver);
+	if (retval)
+		goto failed_usb_register;
+
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
+
+	return 0;
+
+failed_usb_register:
+	usb_serial_deregister(&ssu100_device);
+failed_usb_sio_register:
+	return retval;
+}
+
+static void __exit ssu100_exit(void)
+{
+	usb_deregister(&ssu100_driver);
+	usb_serial_deregister(&ssu100_device);
+}
+
+module_init(ssu100_init);
+module_exit(ssu100_exit);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");