[NET] smc91x: prepare SMC_USE_PXA_DMA to be specified in platform data

Now that the original SMC_USE_PXA_DMA specific code will always being
built if CONFIG_ARCH_PXA is defined, so to make this part of the code
to be PXA public, and still prevent it from being built if support of
PXA is not selected.

A SMC91X_USE_DMA flag is added to the platform data to allow platform
to choose its usage of DMA. Note this flag itself is so named to be
generic enough (assuming other platforms can also use DMA).

It keeps backward compatibility to set the SMC91X_USE_DMA flag if
SMC_USE_PXA_DMA is still defined.
Signed-off-by: NEric Miao <eric.miao@marvell.com>
Acked-by: NNicolas Pitre <nico@cam.org>
Acked-by: NJeff Garzik <jgarzik@pobox.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

drivers/net/smc91x.c

@@ -1939,8 +1939,11 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr,
       	if (retval)
       		goto err_out;
 
-#ifdef SMC_USE_PXA_DMA
-	{
+#ifdef CONFIG_ARCH_PXA
+#  ifdef SMC_USE_PXA_DMA
+	lp->cfg.flags |= SMC91X_USE_DMA;
+#  endif
+	if (lp->cfg.flags & SMC91X_USE_DMA) {
 		int dma = pxa_request_dma(dev->name, DMA_PRIO_LOW,
 					  smc_pxa_dma_irq, NULL);
 		if (dma >= 0)
@@ -1980,7 +1983,7 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr,
 	}
 
 err_out:
-#ifdef SMC_USE_PXA_DMA
+#ifdef CONFIG_ARCH_PXA
 	if (retval && dev->dma != (unsigned char)-1)
 		pxa_free_dma(dev->dma);
 #endif
@@ -2198,7 +2201,7 @@ static int smc_drv_probe(struct platform_device *pdev)
 		goto out_release_attrib;
 	}
 
-#ifdef SMC_USE_PXA_DMA
+#ifdef CONFIG_ARCH_PXA
 	{
 		struct smc_local *lp = netdev_priv(ndev);
 		lp->device = &pdev->dev;
@@ -2241,7 +2244,7 @@ static int smc_drv_remove(struct platform_device *pdev)
 
 	free_irq(ndev->irq, ndev);
 
-#ifdef SMC_USE_PXA_DMA
+#ifdef CONFIG_ARCH_PXA
 	if (ndev->dma != (unsigned char)-1)
 		pxa_free_dma(ndev->dma);
 #endif

drivers/net/smc91x.h

@@ -492,7 +492,7 @@ struct smc_local {
 
 	spinlock_t lock;
 
-#ifdef SMC_USE_PXA_DMA
+#ifdef CONFIG_ARCH_PXA
 	/* DMA needs the physical address of the chip */
 	u_long physaddr;
 	struct device *device;
@@ -510,7 +510,7 @@ struct smc_local {
 #define SMC_16BIT(p)	((p)->cfg.flags & SMC91X_USE_16BIT)
 #define SMC_32BIT(p)	((p)->cfg.flags & SMC91X_USE_32BIT)
 
-#ifdef SMC_USE_PXA_DMA
+#ifdef CONFIG_ARCH_PXA
 /*
  * Let's use the DMA engine on the XScale PXA2xx for RX packets. This is
  * always happening in irq context so no need to worry about races.  TX is
@@ -604,7 +604,7 @@ smc_pxa_dma_irq(int dma, void *dummy)
 {
 	DCSR(dma) = 0;
 }
-#endif  /* SMC_USE_PXA_DMA */
+#endif  /* CONFIG_ARCH_PXA */
 
 
 /*

include/linux/smc91x.h

@@ -14,6 +14,8 @@
 #define SMC91X_IO_SHIFT_3	(3 << 4)
 #define SMC91X_IO_SHIFT(x)	(((x) >> 4) & 0x3)
 
+#define SMC91X_USE_DMA		(1 << 6)
+
 struct smc91x_platdata {
 	unsigned long flags;
 };