ste_dma40: remove enum for endianess

A bool will suffice.  The default is little endian.
Acked-by: NJonas Aaberg <jonas.aberg@stericsson.com>
Signed-off-by: NRabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

arch/arm/mach-ux500/devices-db8500.c

@@ -135,12 +135,10 @@ struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
 	.mode = STEDMA40_MODE_PHYSICAL,
 	.dir = STEDMA40_MEM_TO_MEM,
 
-	.src_info.endianess = STEDMA40_LITTLE_ENDIAN,
 	.src_info.data_width = STEDMA40_BYTE_WIDTH,
 	.src_info.psize = STEDMA40_PSIZE_PHY_1,
 	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
 
-	.dst_info.endianess = STEDMA40_LITTLE_ENDIAN,
 	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
 	.dst_info.psize = STEDMA40_PSIZE_PHY_1,
 	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
@@ -149,12 +147,10 @@ struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
 struct stedma40_chan_cfg dma40_memcpy_conf_log = {
 	.dir = STEDMA40_MEM_TO_MEM,
 
-	.src_info.endianess = STEDMA40_LITTLE_ENDIAN,
 	.src_info.data_width = STEDMA40_BYTE_WIDTH,
 	.src_info.psize = STEDMA40_PSIZE_LOG_1,
 	.src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
 
-	.dst_info.endianess = STEDMA40_LITTLE_ENDIAN,
 	.dst_info.data_width = STEDMA40_BYTE_WIDTH,
 	.dst_info.psize = STEDMA40_PSIZE_LOG_1,
 	.dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,

arch/arm/plat-nomadik/include/plat/ste_dma40.h

@@ -69,11 +69,6 @@ enum stedma40_flow_ctrl {
 	STEDMA40_FLOW_CTRL,
 };
 
-enum stedma40_endianess {
-	STEDMA40_LITTLE_ENDIAN,
-	STEDMA40_BIG_ENDIAN
-};
-
 enum stedma40_periph_data_width {
 	STEDMA40_BYTE_WIDTH = STEDMA40_ESIZE_8_BIT,
 	STEDMA40_HALFWORD_WIDTH = STEDMA40_ESIZE_16_BIT,
@@ -92,13 +87,13 @@ enum stedma40_xfer_dir {
 /**
  * struct stedma40_chan_cfg - dst/src channel configuration
  *
- * @endianess: Endianess of the src/dst hardware
+ * @big_endian: true if the src/dst should be read as big endian
  * @data_width: Data width of the src/dst hardware
  * @p_size: Burst size
  * @flow_ctrl: Flow control on/off.
  */
 struct stedma40_half_channel_info {
-	enum stedma40_endianess endianess;
+	bool big_endian;
 	enum stedma40_periph_data_width data_width;
 	int psize;
 	enum stedma40_flow_ctrl flow_ctrl;

drivers/dma/ste_dma40.c

@@ -2239,11 +2239,11 @@ static void d40_set_runtime_config(struct dma_chan *chan,
 	/* Set up all the endpoint configs */
 	cfg->src_info.data_width = addr_width;
 	cfg->src_info.psize = psize;
-	cfg->src_info.endianess = STEDMA40_LITTLE_ENDIAN;
+	cfg->src_info.big_endian = false;
 	cfg->src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL;
 	cfg->dst_info.data_width = addr_width;
 	cfg->dst_info.psize = psize;
-	cfg->dst_info.endianess = STEDMA40_LITTLE_ENDIAN;
+	cfg->dst_info.big_endian = false;
 	cfg->dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL;
 
 	/* Fill in register values */

drivers/dma/ste_dma40_ll.c

@@ -113,8 +113,10 @@ void d40_phy_cfg(struct stedma40_chan_cfg *cfg,
 		dst |= 1 << D40_SREG_CFG_PRI_POS;
 	}
 
-	src |= cfg->src_info.endianess << D40_SREG_CFG_LBE_POS;
-	dst |= cfg->dst_info.endianess << D40_SREG_CFG_LBE_POS;
+	if (cfg->src_info.big_endian)
+		src |= 1 << D40_SREG_CFG_LBE_POS;
+	if (cfg->dst_info.big_endian)
+		dst |= 1 << D40_SREG_CFG_LBE_POS;
 
 	*src_cfg = src;
 	*dst_cfg = dst;