提交 51c62982 编写于 作者: E Eric Miao

[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage

Considering the header mess ATM, it is not always possible to include
the correct header files within board code. Let's keep this simple:

  <mach/pxa25x.h>  - for pxa25x based platforms
  <mach/pxa27x.h>  - for pxa27x based platforms
  <mach/pxa300.h>  - for pxa300 based platforms
  <mach/pxa320.h>  - for pxa320 based platforms
  <mach/pxa930.h>  - for pxa930 based platforms

NOTE:

1. one header one board file, they are not compatible (i.e. they have
   conflicting definitions which won't compile if included together).

2. Unless strictly necessary, the following header files are considered
   to be SoC files use _only_, and is not recommended to be included in
   board code:

    <mach/hardware.h>
    <mach/pxa-regs.h>
    <mach/pxa2xx-regs.h>
    <mach/pxa3xx-regs.h>
    <mach/mfp.h>
    <mach/mfp-pxa2xx.h>
    <mach/mfp-pxa25x.h>
    <mach/mfp-pxa27x.h>
    <mach/mfp-pxa3xx.h>
    <mach/mfp-pxa300.h>
    <mach/mfp-pxa320.h>
    <mach/mfp-pxa930.h>
Signed-off-by: NEric Miao <eric.miao@marvell.com>
上级 5b079b5a
......@@ -30,8 +30,8 @@
#include <linux/irq.h>
#include <linux/gpio.h>
#include <mach/pxa25x.h>
#include <mach/gumstix.h>
#include <mach/mfp-pxa25x.h>
#include <mach/pxafb.h>
#include "generic.h"
......
......@@ -22,10 +22,8 @@
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa25x.h>
#include <mach/pxa25x.h>
#include <mach/pxa2xx_spi.h>
#include <mach/bitfield.h>
#include "generic.h"
......
......@@ -17,7 +17,7 @@
#include <linux/rtc-v3020.h>
#include <video/mbxfb.h>
#include <mach/mfp-pxa27x.h>
#include <mach/pxa27x.h>
#include <mach/ohci.h>
#include <mach/mmc.h>
......
......@@ -22,8 +22,6 @@
#include <asm/mach/map.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa27x.h>
#include <mach/pxa-regs.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
......
......@@ -28,9 +28,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/mfp-pxa300.h>
#include <mach/hardware.h>
#include <mach/pxa300.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
......
......@@ -28,8 +28,8 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
#include <mach/pxa-regs.h>
#include <mach/mfp-pxa27x.h>
#include <mach/pxa27x.h>
#include <mach/colibri.h>
#include "generic.h"
......
......@@ -41,9 +41,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa25x.h>
#include <mach/pxa25x.h>
#include <mach/i2c.h>
#include <mach/irda.h>
#include <mach/mmc.h>
......
......@@ -24,7 +24,6 @@
#include <mach/sharpsl.h>
#include <mach/corgi.h>
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <mach/pxa2xx-gpio.h>
#include "sharpsl.h"
......
......@@ -37,8 +37,6 @@
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <mach/hardware.h>
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#ifdef DEBUG
......
......@@ -15,8 +15,6 @@
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <mach/hardware.h>
#include <mach/pxa-regs.h>
#include <mach/pxa3xx-regs.h>
#include "generic.h"
......
......@@ -4,7 +4,6 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <mach/pxa-regs.h>
#include <mach/udc.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
......
......@@ -20,9 +20,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/mfp-pxa25x.h>
#include <mach/hardware.h>
#include <mach/pxa-regs.h>
#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
......
......@@ -21,9 +21,7 @@
#include <asm/mach-types.h>
#include <mach/irqs.h>
#include <mach/mfp-pxa25x.h>
#include <mach/pxa-regs.h>
#include <mach/hardware.h>
#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
......
......@@ -22,9 +22,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/mfp-pxa25x.h>
#include <mach/pxa-regs.h>
#include <mach/hardware.h>
#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/pxafb.h>
#include <mach/udc.h>
......
......@@ -24,9 +24,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/mfp-pxa25x.h>
#include <mach/pxa-regs.h>
#include <mach/hardware.h>
#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
#include <mach/irda.h>
......
......@@ -23,9 +23,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/mfp-pxa25x.h>
#include <mach/pxa-regs.h>
#include <mach/hardware.h>
#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
#include <mach/irda.h>
......
......@@ -23,9 +23,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/mfp-pxa25x.h>
#include <mach/pxa-regs.h>
#include <mach/hardware.h>
#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
#include <mach/irqs.h>
......
......@@ -33,8 +33,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/mfp-pxa27x.h>
#include <mach/pxa-regs.h>
#include <mach/pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
......
......@@ -20,8 +20,7 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/mfp-pxa25x.h>
#include <mach/hardware.h>
#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/udc.h>
#include <mach/irda.h>
......
......@@ -19,18 +19,16 @@
#include <linux/input.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/pxa27x.h>
#include <mach/pxafb.h>
#include <mach/ohci.h>
#include <mach/i2c.h>
#include <mach/hardware.h>
#include <mach/pxa27x_keypad.h>
#include <mach/mfp-pxa27x.h>
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "devices.h"
#include "generic.h"
......
......@@ -38,14 +38,12 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
#include <mach/pxa25x.h>
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/gumstix.h>
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa25x.h>
#include "generic.h"
static struct resource flash_resource = {
......
......@@ -24,14 +24,15 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/pxa25x.h>
#include <mach/h5000.h>
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa25x.h>
#include <mach/udc.h>
#include "generic.h"
/*
......
......@@ -31,8 +31,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/pxa-regs.h>
#include <mach/mfp-pxa25x.h>
#include <mach/pxa25x.h>
#include <mach/idp.h>
#include <mach/pxafb.h>
#include <mach/bitfield.h>
......
......@@ -28,11 +28,8 @@
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include <mach/pxa27x.h>
#include <mach/i2c.h>
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa27x.h>
#include <mach/regs-ssp.h>
#include <mach/udc.h>
#include <mach/mmc.h>
#include <mach/pxa2xx_spi.h>
......
#ifndef __MACH_PXA25x_H
#define __MACH_PXA25x_H
#include <mach/hardware.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa25x.h>
#endif /* __MACH_PXA25x_H */
#ifndef __MACH_PXA27x_H
#define __MACH_PXA27x_H
#include <mach/hardware.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa27x.h>
#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */
#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */
#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */
#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */
#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */
#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */
#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */
#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */
#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */
#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */
#endif /* __MACH_PXA27x_H */
......@@ -14,6 +14,8 @@
#ifndef __PXA2XX_REGS_H
#define __PXA2XX_REGS_H
#include <mach/pxa-regs.h>
/*
* Memory controller
*/
......@@ -69,24 +71,6 @@
#define MDREFR_K0RUN (1 << 13) /* SDCLK0 Run Control/Status */
#define MDREFR_E0PIN (1 << 12) /* SDCKE0 Level Control/Status */
#ifdef CONFIG_PXA27x
#define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */
#define ARB_DMA_SLV_PARK (1<<31) /* Be parked with DMA slave when idle */
#define ARB_CI_PARK (1<<30) /* Be parked with Camera Interface when idle */
#define ARB_EX_MEM_PARK (1<<29) /* Be parked with external MEMC when idle */
#define ARB_INT_MEM_PARK (1<<28) /* Be parked with internal MEMC when idle */
#define ARB_USB_PARK (1<<27) /* Be parked with USB when idle */
#define ARB_LCD_PARK (1<<26) /* Be parked with LCD when idle */
#define ARB_DMA_PARK (1<<25) /* Be parked with DMA when idle */
#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */
#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */
#endif
/*
* Power Manager
*/
......
#ifndef __MACH_PXA300_H
#define __MACH_PXA300_H
#include <mach/hardware.h>
#include <mach/pxa3xx-regs.h>
#include <mach/mfp-pxa300.h>
#endif /* __MACH_PXA300_H */
#ifndef __MACH_PXA320_H
#define __MACH_PXA320_H
#include <mach/hardware.h>
#include <mach/pxa3xx-regs.h>
#include <mach/mfp-pxa320.h>
#endif /* __MACH_PXA320_H */
......@@ -13,6 +13,8 @@
#ifndef __ASM_ARCH_PXA3XX_REGS_H
#define __ASM_ARCH_PXA3XX_REGS_H
#include <mach/hardware.h>
/*
* Oscillator Configuration Register (OSCC)
*/
......
#ifndef __MACH_PXA930_H
#define __MACH_PXA930_H
#include <mach/hardware.h>
#include <mach/pxa3xx-regs.h>
#include <mach/mfp-pxa930.h>
#endif /* __MACH_PXA930_H */
......@@ -37,7 +37,6 @@
#if defined(CONFIG_PXA25x)
#define SSCR0_SCR (0x0000ff00) /* Serial Clock Rate (mask) */
#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */
#elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
#define SSCR0_SCR (0x000fff00) /* Serial Clock Rate (mask) */
#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */
......
......@@ -18,7 +18,7 @@
#include <asm/leds.h>
#include <asm/system.h>
#include <mach/pxa-regs.h>
#include <mach/pxa25x.h>
#include <mach/idp.h>
#include "leds.h"
......
......@@ -16,7 +16,7 @@
#include <mach/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
#include <mach/pxa-regs.h>
#include <mach/pxa25x.h>
#include <mach/lubbock.h>
#include "leds.h"
......
......@@ -16,7 +16,7 @@
#include <asm/leds.h>
#include <asm/system.h>
#include <mach/pxa-regs.h>
#include <mach/pxa27x.h>
#include <mach/mainstone.h>
#include "leds.h"
......
......@@ -39,8 +39,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/pxa-regs.h>
#include <mach/mfp-pxa300.h>
#include <mach/pxa300.h>
#include <mach/pxafb.h>
#include <mach/ssp.h>
#include <mach/pxa2xx_spi.h>
......
......@@ -38,9 +38,7 @@
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa27x.h>
#include <mach/pxa27x.h>
#include <mach/lpd270.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
......
......@@ -41,9 +41,7 @@
#include <asm/hardware/sa1111.h>
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa25x.h>
#include <mach/pxa25x.h>
#include <mach/audio.h>
#include <mach/lubbock.h>
#include <mach/udc.h>
......
......@@ -30,10 +30,9 @@
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/pxa27x.h>
#include <mach/magician.h>
#include <mach/mfp-pxa27x.h>
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <mach/pxafb.h>
#include <mach/i2c.h>
#include <mach/mmc.h>
......
......@@ -41,9 +41,7 @@
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa27x.h>
#include <mach/pxa27x.h>
#include <mach/mainstone.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
......
......@@ -39,10 +39,10 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/mfp-pxa27x.h>
#include <mach/pxa27x.h>
#include <mach/pxa27x_keypad.h>
#include <mach/pxafb.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/pxa27x-udc.h>
......
......@@ -19,10 +19,10 @@
#include <linux/types.h>
#include <linux/usb/isp116x.h>
#include <mach/hardware.h>
#include <mach/pxa-regs.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/pxa25x.h>
#include "generic.h"
static void isp116x_pfm_delay(struct device *dev, int delay)
......
......@@ -29,12 +29,11 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/palmld.h>
#include <mach/mmc.h>
#include <mach/pxafb.h>
#include <mach/pxa-regs.h>
#include <mach/mfp-pxa27x.h>
#include <mach/irda.h>
#include <mach/pxa27x_keypad.h>
#include <mach/palmasoc.h>
......
......@@ -31,12 +31,11 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/palmt5.h>
#include <mach/mmc.h>
#include <mach/pxafb.h>
#include <mach/pxa-regs.h>
#include <mach/mfp-pxa27x.h>
#include <mach/irda.h>
#include <mach/pxa27x_keypad.h>
#include <mach/udc.h>
......
......@@ -32,12 +32,11 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/palmtx.h>
#include <mach/mmc.h>
#include <mach/pxafb.h>
#include <mach/pxa-regs.h>
#include <mach/mfp-pxa27x.h>
#include <mach/irda.h>
#include <mach/pxa27x_keypad.h>
#include <mach/udc.h>
......
......@@ -33,13 +33,11 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/palmz72.h>
#include <mach/mmc.h>
#include <mach/pxafb.h>
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa27x.h>
#include <mach/irda.h>
#include <mach/pxa27x_keypad.h>
#include <mach/udc.h>
......
......@@ -29,10 +29,7 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/hardware.h>
#include <mach/pxa-regs.h>
#include <mach/mfp-pxa27x.h>
#include <mach/pxa2xx-regs.h>
#include <mach/pxa27x.h>
#include <mach/pxa2xx_spi.h>
#include <mach/pcm027.h>
#include "generic.h"
......
......@@ -31,13 +31,12 @@
#include <mach/i2c.h>
#include <mach/camera.h>
#include <asm/mach/map.h>
#include <mach/pxa-regs.h>
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/mmc.h>
#include <mach/ohci.h>
#include <mach/pcm990_baseboard.h>
#include <mach/pxafb.h>
#include <mach/mfp-pxa27x.h>
#include "devices.h"
#include "generic.h"
......
......@@ -36,9 +36,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa25x.h>
#include <mach/pxa25x.h>
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/i2c.h>
......
......@@ -25,9 +25,7 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa25x.h>
#include <mach/pxa25x.h>
#include <mach/reset.h>
#include <mach/pm.h>
#include <mach/dma.h>
......
......@@ -21,9 +21,7 @@
#include <mach/hardware.h>
#include <asm/irq.h>
#include <mach/irqs.h>
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa27x.h>
#include <mach/pxa27x.h>
#include <mach/reset.h>
#include <mach/ohci.h>
#include <mach/pm.h>
......
......@@ -16,7 +16,6 @@
#include <mach/hardware.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa2xx.h>
#include <mach/mfp-pxa25x.h>
#include <mach/reset.h>
#include <mach/irda.h>
......
......@@ -17,9 +17,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <mach/pxa3xx-regs.h>
#include <mach/mfp-pxa300.h>
#include <mach/pxa300.h>
#include "generic.h"
#include "devices.h"
......
......@@ -17,10 +17,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <mach/mfp.h>
#include <mach/pxa3xx-regs.h>
#include <mach/mfp-pxa320.h>
#include <mach/pxa320.h>
#include "generic.h"
#include "devices.h"
......
......@@ -16,8 +16,7 @@
#include <linux/irq.h>
#include <linux/dma-mapping.h>
#include <mach/hardware.h>
#include <mach/mfp-pxa930.h>
#include <mach/pxa930.h>
static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
......
......@@ -25,11 +25,9 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/hardware.h>
#include <mach/pxa3xx-regs.h>
#include <mach/mfp-pxa930.h>
#include <mach/pxa930.h>
#include <mach/i2c.h>
#include <mach/regs-lcd.h>
#include <mach/pxafb.h>
#include "devices.h"
......
......@@ -44,9 +44,7 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa27x.h>
#include <mach/pxa27x.h>
#include <mach/pxa27x-udc.h>
#include <mach/reset.h>
#include <mach/i2c.h>
......
......@@ -22,9 +22,8 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/hardware.h>
#include <mach/pxa3xx-regs.h>
#include <mach/mfp-pxa930.h>
#include <mach/pxa930.h>
#include <mach/pxafb.h>
#include <mach/pxa27x_keypad.h>
......
......@@ -36,8 +36,8 @@
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa25x.h>
#include <mach/pxa25x.h>
#include <mach/reset.h>
#include <mach/irda.h>
#include <mach/i2c.h>
......
......@@ -39,10 +39,7 @@
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
#include <mach/hardware.h>
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa27x.h>
#include <mach/pxa27x.h>
#include <mach/pxa2xx_spi.h>
#include <mach/trizeps4.h>
#include <mach/audio.h>
......
......@@ -42,12 +42,9 @@
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <mach/pxa-regs.h>
#include <mach/pxa2xx-regs.h>
#include <mach/bitfield.h>
#include <mach/pxa25x.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
#include <mach/mfp-pxa25x.h>
#include <mach/i2c.h>
#include <mach/viper.h>
......
......@@ -18,9 +18,9 @@
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/i2c/pca953x.h>
#include <linux/gpio.h>
#include <asm/gpio.h>
#include <mach/mfp-pxa300.h>
#include <mach/pxa300.h>
#include <mach/i2c.h>
#include <mach/zylonite.h>
......
......@@ -18,7 +18,7 @@
#include <linux/init.h>
#include <linux/gpio.h>
#include <mach/mfp-pxa320.h>
#include <mach/pxa320.h>
#include <mach/zylonite.h>
#include "generic.h"
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册