OMAP3: PM: add T2 interrupt line mux setting, and enable on 3430SDP

This patch changes for setting the padconf value for sys_nirq line
which is connected to T2 INTR1.  This will fix the T2 keypad wakeup
issue on OMAP3 SDP.
Signed-off-by: NTeerth Reddy <teerth@ti.com>
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>

arch/arm/mach-omap2/board-3430sdp.c

@@ -473,6 +473,11 @@ static inline void board_smc91x_init(void)
 
 #endif
 
+static void enable_board_wakeup_source(void)
+{
+	omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */
+}
+
 static void __init omap_3430sdp_init(void)
 {
 	omap3430_i2c_init();
@@ -490,6 +495,7 @@ static void __init omap_3430sdp_init(void)
 	omap_serial_init();
 	usb_musb_init();
 	board_smc91x_init();
+	enable_board_wakeup_source();
 }
 
 static void __init omap_3430sdp_map_io(void)

arch/arm/mach-omap2/mux.c

@@ -542,6 +542,11 @@ MUX_CFG_34XX("AF13_3430_MMC3_DAT2", 0x5e8,
 		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
 MUX_CFG_34XX("AF13_3430_MMC3_DAT3", 0x5e2,
 		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
+
+/* SYS_NIRQ T2 INT1 */
+MUX_CFG_34XX("AF26_34XX_SYS_NIRQ", 0x1E0,
+		OMAP3_WAKEUP_EN | OMAP34XX_PIN_INPUT_PULLUP |
+		OMAP34XX_MUX_MODE0)
 };
 
 #define OMAP34XX_PINS_SZ	ARRAY_SIZE(omap34xx_pins)

arch/arm/plat-omap/include/mach/mux.h

@@ -885,6 +885,9 @@ enum omap34xx_index {
 	AH9_3430_MMC3_DAT1,
 	AF13_3430_MMC3_DAT2,
 	AF13_3430_MMC3_DAT3,
+
+	/* SYS_NIRQ T2 INT1 */
+	AF26_34XX_SYS_NIRQ,
 };
 
 struct omap_mux_cfg {