wl18xx: default config alignment with phy defaults

Driver default config is aligned with phy default parameters.

Now that RDL1_3 has 2 antennas defined by default we need to explicitly
define ht.mode to HT_MODE_WIDE to have SISO40 as default.
Signed-off-by: NYair Shapira <yair.shapira@ti.com>
Signed-off-by: NIgal Chernobelsky <igalc@ti.com>
Signed-off-by: NEliad Peller <eliad@wizery.com>
Signed-off-by: NLuciano Coelho <luciano.coelho@intel.com>

drivers/net/wireless/ti/wl18xx/main.c

@@ -505,7 +505,7 @@ static struct wlcore_conf wl18xx_conf = {
 
 static struct wl18xx_priv_conf wl18xx_default_priv_conf = {
 	.ht = {
-		.mode				= HT_MODE_DEFAULT,
+		.mode				= HT_MODE_WIDE,
 	},
 	.phy = {
 		.phy_standalone			= 0x00,
@@ -516,7 +516,7 @@ static struct wl18xx_priv_conf wl18xx_default_priv_conf = {
 		.auto_detect			= 0x00,
 		.dedicated_fem			= FEM_NONE,
 		.low_band_component		= COMPONENT_3_WAY_SWITCH,
-		.low_band_component_type	= 0x04,
+		.low_band_component_type	= 0x05,
 		.high_band_component		= COMPONENT_2_WAY_SWITCH,
 		.high_band_component_type	= 0x09,
 		.tcxo_ldo_voltage		= 0x00,
@@ -556,15 +556,15 @@ static struct wl18xx_priv_conf wl18xx_default_priv_conf = {
 		.per_chan_pwr_limit_arr_11p	= { 0xff, 0xff, 0xff, 0xff,
 						    0xff, 0xff, 0xff },
 		.psat				= 0,
-		.low_power_val			= 0x08,
-		.med_power_val			= 0x12,
-		.high_power_val			= 0x18,
-		.low_power_val_2nd		= 0x05,
-		.med_power_val_2nd		= 0x0a,
-		.high_power_val_2nd		= 0x14,
 		.external_pa_dc2dc		= 0,
 		.number_of_assembled_ant2_4	= 2,
 		.number_of_assembled_ant5	= 1,
+		.low_power_val			= 0xff,
+		.med_power_val			= 0xff,
+		.high_power_val			= 0xff,
+		.low_power_val_2nd		= 0xff,
+		.med_power_val_2nd		= 0xff,
+		.high_power_val_2nd		= 0xff,
 		.tx_rf_margin			= 1,
 	},
 };