提交 50dfe70f 编写于 作者: A Anton Vorontsov 提交者: Linus Torvalds

powerpc: introduce and document sdhci,wp-inverted property for eSDHC

eSDHC block in MPC837x SOCs reports inverted write-protect state, soon
sdhci-of driver will look for sdhci,wp-inverted properties to decide
whether apply a specific quirk.

So, document the property and add it to device tree source files.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Cc: Pierre Ossman <pierre@ossman.eu>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: David Vrabel <david.vrabel@csr.com>
Cc: Ben Dooks <ben@fluff.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 81b39802
......@@ -10,6 +10,8 @@ Required properties:
- interrupts : should contain eSDHC interrupt.
- interrupt-parent : interrupt source phandle.
- clock-frequency : specifies eSDHC base clock frequency.
- sdhci,wp-inverted : (optional) specifies that eSDHC controller
reports inverted write-protect state;
- sdhci,1-bit-only : (optional) specifies that a controller can
only handle 1-bit data transfers.
......
......@@ -159,6 +159,7 @@
reg = <0x2e000 0x1000>;
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
sdhci,wp-inverted;
/* Filled in by U-Boot */
clock-frequency = <0>;
};
......
......@@ -173,6 +173,7 @@
reg = <0x2e000 0x1000>;
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
sdhci,wp-inverted;
/* Filled in by U-Boot */
clock-frequency = <111111111>;
};
......
......@@ -150,6 +150,7 @@
reg = <0x2e000 0x1000>;
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
sdhci,wp-inverted;
clock-frequency = <133333333>;
};
};
......
......@@ -159,6 +159,7 @@
reg = <0x2e000 0x1000>;
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
sdhci,wp-inverted;
/* Filled in by U-Boot */
clock-frequency = <0>;
};
......
......@@ -173,6 +173,7 @@
reg = <0x2e000 0x1000>;
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
sdhci,wp-inverted;
/* Filled in by U-Boot */
clock-frequency = <111111111>;
};
......
......@@ -157,6 +157,7 @@
reg = <0x2e000 0x1000>;
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
sdhci,wp-inverted;
/* Filled in by U-Boot */
clock-frequency = <0>;
};
......
......@@ -171,6 +171,7 @@
reg = <0x2e000 0x1000>;
interrupts = <42 0x8>;
interrupt-parent = <&ipic>;
sdhci,wp-inverted;
/* Filled in by U-Boot */
clock-frequency = <111111111>;
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册