提交 5037d532 编写于 作者: F Florian Fainelli 提交者: David S. Miller

net: dsa: add Broadcom tag RX/TX handler

Add support for the 4-bytes Broadcom tag that built-in switches such as
the Starfighter 2 might insert when receiving packets, or that we need
to insert while targetting specific switch ports. We use a fake local
EtherType value for this 4-bytes switch tag: ETH_P_BRCMTAG to make sure
we can assign DSA-specific network operations within the DSA drivers.
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 ce31b31c
...@@ -19,6 +19,11 @@ ...@@ -19,6 +19,11 @@
#include <linux/phy.h> #include <linux/phy.h>
#include <linux/phy_fixed.h> #include <linux/phy_fixed.h>
/* Not an official ethertype value, used only internally for DSA
* demultiplexing
*/
#define ETH_P_BRCMTAG (ETH_P_XDSA + 1)
#define DSA_MAX_SWITCHES 4 #define DSA_MAX_SWITCHES 4
#define DSA_MAX_PORTS 12 #define DSA_MAX_PORTS 12
......
...@@ -12,6 +12,9 @@ config NET_DSA ...@@ -12,6 +12,9 @@ config NET_DSA
if NET_DSA if NET_DSA
# tagging formats # tagging formats
config NET_DSA_TAG_BRCM
bool
config NET_DSA_TAG_DSA config NET_DSA_TAG_DSA
bool bool
......
...@@ -3,6 +3,7 @@ obj-$(CONFIG_NET_DSA) += dsa_core.o ...@@ -3,6 +3,7 @@ obj-$(CONFIG_NET_DSA) += dsa_core.o
dsa_core-y += dsa.o slave.o dsa_core-y += dsa.o slave.o
# tagging formats # tagging formats
dsa_core-$(CONFIG_NET_DSA_TAG_BRCM) += tag_brcm.o
dsa_core-$(CONFIG_NET_DSA_TAG_DSA) += tag_dsa.o dsa_core-$(CONFIG_NET_DSA_TAG_DSA) += tag_dsa.o
dsa_core-$(CONFIG_NET_DSA_TAG_EDSA) += tag_edsa.o dsa_core-$(CONFIG_NET_DSA_TAG_EDSA) += tag_edsa.o
dsa_core-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o dsa_core-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o
...@@ -57,5 +57,8 @@ extern const struct dsa_device_ops edsa_netdev_ops; ...@@ -57,5 +57,8 @@ extern const struct dsa_device_ops edsa_netdev_ops;
/* tag_trailer.c */ /* tag_trailer.c */
extern const struct dsa_device_ops trailer_netdev_ops; extern const struct dsa_device_ops trailer_netdev_ops;
/* tag_brcm.c */
extern const struct dsa_device_ops brcm_netdev_ops;
#endif #endif
...@@ -450,6 +450,11 @@ dsa_slave_create(struct dsa_switch *ds, struct device *parent, ...@@ -450,6 +450,11 @@ dsa_slave_create(struct dsa_switch *ds, struct device *parent,
case htons(ETH_P_TRAILER): case htons(ETH_P_TRAILER):
ds->dst->ops = &trailer_netdev_ops; ds->dst->ops = &trailer_netdev_ops;
break; break;
#endif
#ifdef CONFIG_NET_DSA_TAG_BRCM
case htons(ETH_P_BRCMTAG):
ds->dst->ops = &brcm_netdev_ops;
break;
#endif #endif
default: default:
ds->dst->ops = &notag_netdev_ops; ds->dst->ops = &notag_netdev_ops;
......
/*
* Broadcom tag support
*
* Copyright (C) 2014 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/etherdevice.h>
#include <linux/list.h>
#include <linux/netdevice.h>
#include <linux/slab.h>
#include "dsa_priv.h"
/* This tag length is 4 bytes, older ones were 6 bytes, we do not
* handle them
*/
#define BRCM_TAG_LEN 4
/* Tag is constructed and desconstructed using byte by byte access
* because the tag is placed after the MAC Source Address, which does
* not make it 4-bytes aligned, so this might cause unaligned accesses
* on most systems where this is used.
*/
/* Ingress and egress opcodes */
#define BRCM_OPCODE_SHIFT 5
#define BRCM_OPCODE_MASK 0x7
/* Ingress fields */
/* 1st byte in the tag */
#define BRCM_IG_TC_SHIFT 2
#define BRCM_IG_TC_MASK 0x7
/* 2nd byte in the tag */
#define BRCM_IG_TE_MASK 0x3
#define BRCM_IG_TS_SHIFT 7
/* 3rd byte in the tag */
#define BRCM_IG_DSTMAP2_MASK 1
#define BRCM_IG_DSTMAP1_MASK 0xff
/* Egress fields */
/* 2nd byte in the tag */
#define BRCM_EG_CID_MASK 0xff
/* 3rd byte in the tag */
#define BRCM_EG_RC_MASK 0xff
#define BRCM_EG_RC_RSVD (3 << 6)
#define BRCM_EG_RC_EXCEPTION (1 << 5)
#define BRCM_EG_RC_PROT_SNOOP (1 << 4)
#define BRCM_EG_RC_PROT_TERM (1 << 3)
#define BRCM_EG_RC_SWITCH (1 << 2)
#define BRCM_EG_RC_MAC_LEARN (1 << 1)
#define BRCM_EG_RC_MIRROR (1 << 0)
#define BRCM_EG_TC_SHIFT 5
#define BRCM_EG_TC_MASK 0x7
#define BRCM_EG_PID_MASK 0x1f
static netdev_tx_t brcm_tag_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct dsa_slave_priv *p = netdev_priv(dev);
u8 *brcm_tag;
dev->stats.tx_packets++;
dev->stats.tx_bytes += skb->len;
if (skb_cow_head(skb, BRCM_TAG_LEN) < 0)
goto out_free;
skb_push(skb, BRCM_TAG_LEN);
memmove(skb->data, skb->data + BRCM_TAG_LEN, 2 * ETH_ALEN);
/* Build the tag after the MAC Source Address */
brcm_tag = skb->data + 2 * ETH_ALEN;
/* Set the ingress opcode, traffic class, tag enforcment is
* deprecated
*/
brcm_tag[0] = (1 << BRCM_OPCODE_SHIFT) |
((skb->priority << BRCM_IG_TC_SHIFT) & BRCM_IG_TC_MASK);
brcm_tag[1] = 0;
brcm_tag[2] = 0;
if (p->port == 8)
brcm_tag[2] = BRCM_IG_DSTMAP2_MASK;
brcm_tag[3] = (1 << p->port) & BRCM_IG_DSTMAP1_MASK;
/* Queue the SKB for transmission on the parent interface, but
* do not modify its EtherType
*/
skb->protocol = htons(ETH_P_BRCMTAG);
skb->dev = p->parent->dst->master_netdev;
dev_queue_xmit(skb);
return NETDEV_TX_OK;
out_free:
kfree_skb(skb);
return NETDEV_TX_OK;
}
static int brcm_tag_rcv(struct sk_buff *skb, struct net_device *dev,
struct packet_type *pt, struct net_device *orig_dev)
{
struct dsa_switch_tree *dst = dev->dsa_ptr;
struct dsa_switch *ds;
int source_port;
u8 *brcm_tag;
if (unlikely(dst == NULL))
goto out_drop;
ds = dst->ds[0];
skb = skb_unshare(skb, GFP_ATOMIC);
if (skb == NULL)
goto out;
if (unlikely(!pskb_may_pull(skb, BRCM_TAG_LEN)))
goto out_drop;
/* skb->data points to the EtherType, the tag is right before it */
brcm_tag = skb->data - 2;
/* The opcode should never be different than 0b000 */
if (unlikely((brcm_tag[0] >> BRCM_OPCODE_SHIFT) & BRCM_OPCODE_MASK))
goto out_drop;
/* We should never see a reserved reason code without knowing how to
* handle it
*/
WARN_ON(brcm_tag[2] & BRCM_EG_RC_RSVD);
/* Locate which port this is coming from */
source_port = brcm_tag[3] & BRCM_EG_PID_MASK;
/* Validate port against switch setup, either the port is totally */
if (source_port >= DSA_MAX_PORTS || ds->ports[source_port] == NULL)
goto out_drop;
/* Remove Broadcom tag and update checksum */
skb_pull_rcsum(skb, BRCM_TAG_LEN);
/* Move the Ethernet DA and SA */
memmove(skb->data - ETH_HLEN,
skb->data - ETH_HLEN - BRCM_TAG_LEN,
2 * ETH_ALEN);
skb_push(skb, ETH_HLEN);
skb->pkt_type = PACKET_HOST;
skb->dev = ds->ports[source_port];
skb->protocol = eth_type_trans(skb, skb->dev);
skb->dev->stats.rx_packets++;
skb->dev->stats.rx_bytes += skb->len;
netif_receive_skb(skb);
return 0;
out_drop:
kfree_skb(skb);
out:
return 0;
}
const struct dsa_device_ops brcm_netdev_ops = {
.xmit = brcm_tag_xmit,
.rcv = brcm_tag_rcv,
};
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册