提交 4ffb7a6a 编写于 作者: C Clemens Ladisch

firewire: add CSR cmstr support

Implement the cmstr bit, which is required for cycle master capable
nodes and tested for by the Base 1394 Test Suite.

This bit allows the bus master to disable cycle start packets; there are
bus master implementations that actually do this.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
上级 3d1f46eb
......@@ -1003,7 +1003,12 @@ static u32 read_state_register(struct fw_card *card)
* reset, but then cleared when the units are ready again, which
* happens immediately for us.
*/
return 0;
u32 value = 0x0000;
/* Bit 8 (cmstr): */
value |= card->driver->read_csr_reg(card, CSR_STATE_CLEAR);
return value;
}
static void update_split_timeout(struct fw_card *card)
......@@ -1034,6 +1039,8 @@ static void handle_registers(struct fw_card *card, struct fw_request *request,
if (tcode == TCODE_READ_QUADLET_REQUEST) {
*data = cpu_to_be32(read_state_register(card));
} else if (tcode == TCODE_WRITE_QUADLET_REQUEST) {
card->driver->write_csr_reg(card, CSR_STATE_CLEAR,
be32_to_cpu(*data));
} else {
rcode = RCODE_TYPE_ERROR;
}
......@@ -1043,7 +1050,8 @@ static void handle_registers(struct fw_card *card, struct fw_request *request,
if (tcode == TCODE_READ_QUADLET_REQUEST) {
*data = cpu_to_be32(read_state_register(card));
} else if (tcode == TCODE_WRITE_QUADLET_REQUEST) {
/* FIXME: implement cmstr */
card->driver->write_csr_reg(card, CSR_STATE_SET,
be32_to_cpu(*data));
/* FIXME: implement abdicate */
} else {
rcode = RCODE_TYPE_ERROR;
......
......@@ -40,6 +40,8 @@ struct fw_packet;
#define FEATURE_PRIORITY_BUDGET 0x01
#define CSR_STATE_BIT_CMSTR (1 << 8)
struct fw_card_driver {
/*
* Enable the given card with the given initial config rom.
......
......@@ -172,6 +172,7 @@ struct fw_ohci {
unsigned quirks;
unsigned int pri_req_max;
u32 bus_time;
bool is_root;
/*
* Spinlock for accessing fw_ohci data. Never call out of
......@@ -1400,6 +1401,7 @@ static void bus_reset_tasklet(unsigned long data)
unsigned long flags;
void *free_rom = NULL;
dma_addr_t free_rom_bus = 0;
bool is_new_root;
reg = reg_read(ohci, OHCI1394_NodeID);
if (!(reg & OHCI1394_NodeID_idValid)) {
......@@ -1413,6 +1415,12 @@ static void bus_reset_tasklet(unsigned long data)
ohci->node_id = reg & (OHCI1394_NodeID_busNumber |
OHCI1394_NodeID_nodeNumber);
is_new_root = (reg & OHCI1394_NodeID_root) != 0;
if (!(ohci->is_root && is_new_root))
reg_write(ohci, OHCI1394_LinkControlSet,
OHCI1394_LinkControl_cycleMaster);
ohci->is_root = is_new_root;
reg = reg_read(ohci, OHCI1394_SelfIDCount);
if (reg & OHCI1394_SelfIDCount_selfIDError) {
fw_notify("inconsistent self IDs\n");
......@@ -2013,6 +2021,16 @@ static u32 ohci_read_csr_reg(struct fw_card *card, int csr_offset)
u32 value;
switch (csr_offset) {
case CSR_STATE_CLEAR:
case CSR_STATE_SET:
/* the controller driver handles only the cmstr bit */
if (ohci->is_root &&
(reg_read(ohci, OHCI1394_LinkControlSet) &
OHCI1394_LinkControl_cycleMaster))
return CSR_STATE_BIT_CMSTR;
else
return 0;
case CSR_NODE_IDS:
return reg_read(ohci, OHCI1394_NodeID) << 16;
......@@ -2050,6 +2068,23 @@ static void ohci_write_csr_reg(struct fw_card *card, int csr_offset, u32 value)
unsigned long flags;
switch (csr_offset) {
case CSR_STATE_CLEAR:
/* the controller driver handles only the cmstr bit */
if ((value & CSR_STATE_BIT_CMSTR) && ohci->is_root) {
reg_write(ohci, OHCI1394_LinkControlClear,
OHCI1394_LinkControl_cycleMaster);
flush_writes(ohci);
}
break;
case CSR_STATE_SET:
if ((value & CSR_STATE_BIT_CMSTR) && ohci->is_root) {
reg_write(ohci, OHCI1394_LinkControlSet,
OHCI1394_LinkControl_cycleMaster);
flush_writes(ohci);
}
break;
case CSR_NODE_IDS:
reg_write(ohci, OHCI1394_NodeID, value >> 16);
flush_writes(ohci);
......
......@@ -60,6 +60,7 @@
#define OHCI1394_LinkControl_cycleSource (1 << 22)
#define OHCI1394_NodeID 0x0E8
#define OHCI1394_NodeID_idValid 0x80000000
#define OHCI1394_NodeID_root 0x40000000
#define OHCI1394_NodeID_nodeNumber 0x0000003f
#define OHCI1394_NodeID_busNumber 0x0000ffc0
#define OHCI1394_PhyControl 0x0EC
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册