提交 4fe20e97 编写于 作者: R Rajendra Nayak 提交者: Kevin Hilman

OMAP3: hwmod: add I2C hwmods for OMAP3430

Add hwmod structures for I2C controllers on OMAP3430.

This patch was developed in collaboration with Paul Walmsley
<paul@pwsan.com>.

OMAP3 fixes for correct IDLEST bit monitoring from
G, Manjunath Kondaiah <manjugk@ti.com>
Signed-off-by: NRajendra Nayak <rnayak@ti.com>
Signed-off-by: NPaul Walmsley <paul@pwsan.com>
Cc: G, Manjunath Kondaiah <manjugk@ti.com>
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
上级 2004290f
......@@ -18,6 +18,9 @@
#include <plat/cpu.h>
#include <plat/dma.h>
#include <plat/serial.h>
#include <plat/l4_3xxx.h>
#include <plat/i2c.h>
#include <plat/omap34xx.h>
#include "omap_hwmod_common_data.h"
......@@ -39,6 +42,9 @@ static struct omap_hwmod omap3xxx_l3_main_hwmod;
static struct omap_hwmod omap3xxx_l4_core_hwmod;
static struct omap_hwmod omap3xxx_l4_per_hwmod;
static struct omap_hwmod omap3xxx_wd_timer2_hwmod;
static struct omap_hwmod omap3xxx_i2c1_hwmod;
static struct omap_hwmod omap3xxx_i2c2_hwmod;
static struct omap_hwmod omap3xxx_i2c3_hwmod;
/* L3 -> L4_CORE interface */
static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = {
......@@ -169,6 +175,84 @@ static struct omap_hwmod_ocp_if omap3_l4_per__uart4 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* I2C IP block address space length (in bytes) */
#define OMAP2_I2C_AS_LEN 128
/* L4 CORE -> I2C1 interface */
static struct omap_hwmod_addr_space omap3xxx_i2c1_addr_space[] = {
{
.pa_start = 0x48070000,
.pa_end = 0x48070000 + OMAP2_I2C_AS_LEN - 1,
.flags = ADDR_TYPE_RT,
},
};
static struct omap_hwmod_ocp_if omap3_l4_core__i2c1 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_i2c1_hwmod,
.clk = "i2c1_ick",
.addr = omap3xxx_i2c1_addr_space,
.addr_cnt = ARRAY_SIZE(omap3xxx_i2c1_addr_space),
.fw = {
.omap2 = {
.l4_fw_region = OMAP3_L4_CORE_FW_I2C1_REGION,
.l4_prot_group = 7,
.flags = OMAP_FIREWALL_L4,
}
},
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4 CORE -> I2C2 interface */
static struct omap_hwmod_addr_space omap3xxx_i2c2_addr_space[] = {
{
.pa_start = 0x48072000,
.pa_end = 0x48072000 + OMAP2_I2C_AS_LEN - 1,
.flags = ADDR_TYPE_RT,
},
};
static struct omap_hwmod_ocp_if omap3_l4_core__i2c2 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_i2c2_hwmod,
.clk = "i2c2_ick",
.addr = omap3xxx_i2c2_addr_space,
.addr_cnt = ARRAY_SIZE(omap3xxx_i2c2_addr_space),
.fw = {
.omap2 = {
.l4_fw_region = OMAP3_L4_CORE_FW_I2C2_REGION,
.l4_prot_group = 7,
.flags = OMAP_FIREWALL_L4,
}
},
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4 CORE -> I2C3 interface */
static struct omap_hwmod_addr_space omap3xxx_i2c3_addr_space[] = {
{
.pa_start = 0x48060000,
.pa_end = 0x48060000 + OMAP2_I2C_AS_LEN - 1,
.flags = ADDR_TYPE_RT,
},
};
static struct omap_hwmod_ocp_if omap3_l4_core__i2c3 = {
.master = &omap3xxx_l4_core_hwmod,
.slave = &omap3xxx_i2c3_hwmod,
.clk = "i2c3_ick",
.addr = omap3xxx_i2c3_addr_space,
.addr_cnt = ARRAY_SIZE(omap3xxx_i2c3_addr_space),
.fw = {
.omap2 = {
.l4_fw_region = OMAP3_L4_CORE_FW_I2C3_REGION,
.l4_prot_group = 7,
.flags = OMAP_FIREWALL_L4,
}
},
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* Slave interfaces on the L4_CORE interconnect */
static struct omap_hwmod_ocp_if *omap3xxx_l4_core_slaves[] = {
&omap3xxx_l3_main__l4_core,
......@@ -179,6 +263,9 @@ static struct omap_hwmod_ocp_if *omap3xxx_l4_core_masters[] = {
&omap3xxx_l4_core__l4_wkup,
&omap3_l4_core__uart1,
&omap3_l4_core__uart2,
&omap3_l4_core__i2c1,
&omap3_l4_core__i2c2,
&omap3_l4_core__i2c3,
};
/* L4 CORE */
......@@ -315,6 +402,18 @@ static struct omap_hwmod_class_sysconfig omap3xxx_wd_timer_sysc = {
.sysc_fields = &omap_hwmod_sysc_type1,
};
/* I2C common */
static struct omap_hwmod_class_sysconfig i2c_sysc = {
.rev_offs = 0x00,
.sysc_offs = 0x20,
.syss_offs = 0x10,
.sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
SYSC_HAS_AUTOIDLE),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class omap3xxx_wd_timer_hwmod_class = {
.name = "wd_timer",
.sysc = &omap3xxx_wd_timer_sysc,
......@@ -509,6 +608,137 @@ static struct omap_hwmod omap3xxx_uart4_hwmod = {
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1),
};
static struct omap_hwmod_class i2c_class = {
.name = "i2c",
.sysc = &i2c_sysc,
};
/* I2C1 */
static struct omap_i2c_dev_attr i2c1_dev_attr = {
.fifo_depth = 8, /* bytes */
};
static struct omap_hwmod_irq_info i2c1_mpu_irqs[] = {
{ .irq = INT_24XX_I2C1_IRQ, },
};
static struct omap_hwmod_dma_info i2c1_sdma_reqs[] = {
{ .name = "tx", .dma_req = OMAP24XX_DMA_I2C1_TX },
{ .name = "rx", .dma_req = OMAP24XX_DMA_I2C1_RX },
};
static struct omap_hwmod_ocp_if *omap3xxx_i2c1_slaves[] = {
&omap3_l4_core__i2c1,
};
static struct omap_hwmod omap3xxx_i2c1_hwmod = {
.name = "i2c1",
.mpu_irqs = i2c1_mpu_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(i2c1_mpu_irqs),
.sdma_reqs = i2c1_sdma_reqs,
.sdma_reqs_cnt = ARRAY_SIZE(i2c1_sdma_reqs),
.main_clk = "i2c1_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.prcm_reg_id = 1,
.module_bit = OMAP3430_EN_I2C1_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_I2C1_SHIFT,
},
},
.slaves = omap3xxx_i2c1_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_i2c1_slaves),
.class = &i2c_class,
.dev_attr = &i2c1_dev_attr,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* I2C2 */
static struct omap_i2c_dev_attr i2c2_dev_attr = {
.fifo_depth = 8, /* bytes */
};
static struct omap_hwmod_irq_info i2c2_mpu_irqs[] = {
{ .irq = INT_24XX_I2C2_IRQ, },
};
static struct omap_hwmod_dma_info i2c2_sdma_reqs[] = {
{ .name = "tx", .dma_req = OMAP24XX_DMA_I2C2_TX },
{ .name = "rx", .dma_req = OMAP24XX_DMA_I2C2_RX },
};
static struct omap_hwmod_ocp_if *omap3xxx_i2c2_slaves[] = {
&omap3_l4_core__i2c2,
};
static struct omap_hwmod omap3xxx_i2c2_hwmod = {
.name = "i2c2",
.mpu_irqs = i2c2_mpu_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(i2c2_mpu_irqs),
.sdma_reqs = i2c2_sdma_reqs,
.sdma_reqs_cnt = ARRAY_SIZE(i2c2_sdma_reqs),
.main_clk = "i2c2_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.prcm_reg_id = 1,
.module_bit = OMAP3430_EN_I2C2_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_I2C2_SHIFT,
},
},
.slaves = omap3xxx_i2c2_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_i2c2_slaves),
.class = &i2c_class,
.dev_attr = &i2c2_dev_attr,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
/* I2C3 */
static struct omap_i2c_dev_attr i2c3_dev_attr = {
.fifo_depth = 64, /* bytes */
};
static struct omap_hwmod_irq_info i2c3_mpu_irqs[] = {
{ .irq = INT_34XX_I2C3_IRQ, },
};
static struct omap_hwmod_dma_info i2c3_sdma_reqs[] = {
{ .name = "tx", .dma_req = OMAP34XX_DMA_I2C3_TX },
{ .name = "rx", .dma_req = OMAP34XX_DMA_I2C3_RX },
};
static struct omap_hwmod_ocp_if *omap3xxx_i2c3_slaves[] = {
&omap3_l4_core__i2c3,
};
static struct omap_hwmod omap3xxx_i2c3_hwmod = {
.name = "i2c3",
.mpu_irqs = i2c3_mpu_irqs,
.mpu_irqs_cnt = ARRAY_SIZE(i2c3_mpu_irqs),
.sdma_reqs = i2c3_sdma_reqs,
.sdma_reqs_cnt = ARRAY_SIZE(i2c3_sdma_reqs),
.main_clk = "i2c3_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.prcm_reg_id = 1,
.module_bit = OMAP3430_EN_I2C3_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP3430_ST_I2C3_SHIFT,
},
},
.slaves = omap3xxx_i2c3_slaves,
.slaves_cnt = ARRAY_SIZE(omap3xxx_i2c3_slaves),
.class = &i2c_class,
.dev_attr = &i2c3_dev_attr,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
&omap3xxx_l3_main_hwmod,
&omap3xxx_l4_core_hwmod,
......@@ -521,6 +751,9 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
&omap3xxx_uart2_hwmod,
&omap3xxx_uart3_hwmod,
&omap3xxx_uart4_hwmod,
&omap3xxx_i2c1_hwmod,
&omap3xxx_i2c2_hwmod,
&omap3xxx_i2c3_hwmod,
NULL,
};
......
......@@ -101,8 +101,11 @@
#define OMAP3430_GRPSEL_MCSPI3_MASK (1 << 20)
#define OMAP3430_GRPSEL_MCSPI2_MASK (1 << 19)
#define OMAP3430_GRPSEL_MCSPI1_MASK (1 << 18)
#define OMAP3430_GRPSEL_I2C3_SHIFT 17
#define OMAP3430_GRPSEL_I2C3_MASK (1 << 17)
#define OMAP3430_GRPSEL_I2C2_SHIFT 16
#define OMAP3430_GRPSEL_I2C2_MASK (1 << 16)
#define OMAP3430_GRPSEL_I2C1_SHIFT 15
#define OMAP3430_GRPSEL_I2C1_MASK (1 << 15)
#define OMAP3430_GRPSEL_UART2_MASK (1 << 14)
#define OMAP3430_GRPSEL_UART1_MASK (1 << 13)
......
......@@ -36,6 +36,19 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
}
#endif
/**
* i2c_dev_attr - OMAP I2C controller device attributes for omap_hwmod
* @fifo_depth: total controller FIFO size (in bytes)
* @flags: differences in hardware support capability
*
* @fifo_depth represents what exists on the hardware, not what is
* actually configured at runtime by the device driver.
*/
struct omap_i2c_dev_attr {
u8 fifo_depth;
u8 flags;
};
void __init omap1_i2c_mux_pins(int bus_id);
void __init omap2_i2c_mux_pins(int bus_id);
......
/*
* arch/arm/plat-omap/include/mach/l4_3xxx.h - L4 firewall definitions
*
* Copyright (C) 2009 Nokia Corporation
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*/
#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_L4_3XXX_H
#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_L4_3XXX_H
/* L4 CORE */
#define OMAP3_L4_CORE_FW_I2C1_REGION 21
#define OMAP3_L4_CORE_FW_I2C1_TA_REGION 22
#define OMAP3_L4_CORE_FW_I2C2_REGION 23
#define OMAP3_L4_CORE_FW_I2C2_TA_REGION 24
#define OMAP3_L4_CORE_FW_I2C3_REGION 73
#define OMAP3_L4_CORE_FW_I2C3_TA_REGION 74
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册