m68knommu: make 528x FEC platform addressing consistent

If we make all FEC (ethernet) addressing consistent across all ColdFire
family members then we will be able to remove the duplicated plaform data
and use a single setup for all.

So modify the ColdFire 528x FEC addressing so that:

. FECs are numbered from 0 up
. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

arch/m68k/include/asm/m528xsim.h

@@ -38,12 +38,19 @@
 #define	MCFINT_UART1		14		/* Interrupt number for UART1 */
 #define	MCFINT_UART2		15		/* Interrupt number for UART2 */
 #define	MCFINT_QSPI		18		/* Interrupt number for QSPI */
+#define	MCFINT_FECRX0		23		/* Interrupt number for FEC */
+#define	MCFINT_FECTX0		27		/* Interrupt number for FEC */
+#define	MCFINT_FECENTC0		29		/* Interrupt number for FEC */
 #define	MCFINT_PIT1		55		/* Interrupt number for PIT1 */
 
 #define	MCF_IRQ_UART0	        (MCFINT_VECBASE + MCFINT_UART0)
 #define	MCF_IRQ_UART1	        (MCFINT_VECBASE + MCFINT_UART1)
 #define	MCF_IRQ_UART2	        (MCFINT_VECBASE + MCFINT_UART2)
 
+#define	MCF_IRQ_FECRX0		(MCFINT_VECBASE + MCFINT_FECRX0)
+#define	MCF_IRQ_FECTX0		(MCFINT_VECBASE + MCFINT_FECTX0)
+#define	MCF_IRQ_FECENTC0	(MCFINT_VECBASE + MCFINT_FECENTC0)
+
 /*
  *	SDRAM configuration registers.
  */
@@ -71,8 +78,8 @@
 /*
  *	FEC ethernet module.
  */
-#define	MCFFEC_BASE		(MCF_IPSBAR + 0x00001000)
-#define	MCFFEC_SIZE		0x800
+#define	MCFFEC_BASE0		(MCF_IPSBAR + 0x00001000)
+#define	MCFFEC_SIZE0		0x800
 
 /*
  * 	GPIO registers

arch/m68k/platform/528x/config.c

@@ -29,23 +29,23 @@
 
 static struct resource m528x_fec_resources[] = {
 	{
-		.start		= MCFFEC_BASE,
-		.end		= MCFFEC_BASE + MCFFEC_SIZE - 1,
+		.start		= MCFFEC_BASE0,
+		.end		= MCFFEC_BASE0 + MCFFEC_SIZE0 - 1,
 		.flags		= IORESOURCE_MEM,
 	},
 	{
-		.start		= 64 + 23,
-		.end		= 64 + 23,
+		.start		= MCF_IRQ_FECRX0,
+		.end		= MCF_IRQ_FECRX0,
 		.flags		= IORESOURCE_IRQ,
 	},
 	{
-		.start		= 64 + 27,
-		.end		= 64 + 27,
+		.start		= MCF_IRQ_FECTX0,
+		.end		= MCF_IRQ_FECTX0,
 		.flags		= IORESOURCE_IRQ,
 	},
 	{
-		.start		= 64 + 29,
-		.end		= 64 + 29,
+		.start		= MCF_IRQ_FECENTC0,
+		.end		= MCF_IRQ_FECENTC0,
 		.flags		= IORESOURCE_IRQ,
 	},
 };