Merge tag 'phy-for-4.11' of...

Merge tag 'phy-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next

Kishon writes:

phy: for 4.11

 *) Add USB HSIC and HS phy driver for Qualcomm's SoC
 *) Add USB3 PHY driver for Broadcom NSP SoC
 *) Make sun4i-usb-phy driver to be used for V3s USB PHY
 *) Misc fixes and cleanups
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>

Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt

+Broadcom USB3 phy binding for northstar plus SoC
+The USB3 phy is internal to the SoC and is accessed using mdio interface.
+
+Required mdio bus properties:
+- reg: Should be 0x0 for SoC internal USB3 phy
+- #address-cells: must be 1
+- #size-cells: must be 0
+
+Required USB3 PHY properties:
+- compatible: should be "brcm,nsp-usb3-phy"
+- reg: USB3 Phy address on SoC internal MDIO bus and it should be 0x10.
+- usb3-ctrl-syscon: handler of syscon node defining physical address
+  of usb3 control register.
+- #phy-cells: must be 0
+
+Required usb3 control properties:
+- compatible: should be "brcm,nsp-usb3-ctrl"
+- reg: offset and length of the control registers
+
+Example:
+
+	mdio@0 {
+		reg = <0x0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb3_phy: usb-phy@10 {
+			compatible = "brcm,nsp-usb3-phy";
+			reg = <0x10>;
+			usb3-ctrl-syscon = <&usb3_ctrl>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+	};
+
+	usb3_ctrl: syscon@104408 {
+		compatible = "brcm,nsp-usb3-ctrl", "syscon";
+		reg = <0x104408 0x3fc>;
+	};

Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt

+Qualcomm's USB HS PHY
+
+PROPERTIES
+
+- compatible:
+    Usage: required
+    Value type: <string>
+    Definition: Should contain "qcom,usb-hs-phy" and more specifically one of the
+                following:
+
+                        "qcom,usb-hs-phy-apq8064"
+                        "qcom,usb-hs-phy-msm8916"
+                        "qcom,usb-hs-phy-msm8974"
+
+- #phy-cells:
+    Usage: required
+    Value type: <u32>
+    Definition: Should contain 0
+
+- clocks:
+    Usage: required
+    Value type: <prop-encoded-array>
+    Definition: Should contain clock specifier for the reference and sleep
+                clocks
+
+- clock-names:
+    Usage: required
+    Value type: <stringlist>
+    Definition: Should contain "ref" and "sleep" for the reference and sleep
+                clocks respectively
+
+- resets:
+    Usage: required
+    Value type: <prop-encoded-array>
+    Definition: Should contain the phy and POR resets
+
+- reset-names:
+    Usage: required
+    Value type: <stringlist>
+    Definition: Should contain "phy" and "por" for the phy and POR resets
+                respectively
+
+- v3p3-supply:
+    Usage: required
+    Value type: <phandle>
+    Definition: Should contain a reference to the 3.3V supply
+
+- v1p8-supply:
+    Usage: required
+    Value type: <phandle>
+    Definition: Should contain a reference to the 1.8V supply
+
+- extcon:
+    Usage: optional
+    Value type: <prop-encoded-array>
+    Definition: Should contain the vbus extcon
+
+- qcom,init-seq:
+    Usage: optional
+    Value type: <u8 array>
+    Definition: Should contain a sequence of ULPI address and value pairs to
+                program into the ULPI_EXT_VENDOR_SPECIFIC area. This is related
+                to Device Mode Eye Diagram test. The addresses are offsets
+                from the ULPI_EXT_VENDOR_SPECIFIC address, for example,
+                <0x1 0x53> would mean "write the value 0x53 to address 0x81".
+
+EXAMPLE
+
+otg: usb-controller {
+	ulpi {
+		phy {
+			compatible = "qcom,usb-hs-phy-msm8974", "qcom,usb-hs-phy";
+			#phy-cells = <0>;
+			clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
+			clock-names = "ref", "sleep";
+			resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
+			reset-names = "phy", "por";
+			v3p3-supply = <&pm8941_l24>;
+			v1p8-supply = <&pm8941_l6>;
+			extcon = <&smbb>;
+			qcom,init-seq = /bits/ 8 <0x1 0x63>;
+		};
+	};
+};

Documentation/devicetree/bindings/phy/qcom,usb-hsic-phy.txt

+Qualcomm's USB HSIC PHY
+
+PROPERTIES
+
+- compatible:
+    Usage: required
+    Value type: <string>
+    Definition: Should contain "qcom,usb-hsic-phy" and more specifically one of the
+		following:
+
+			"qcom,usb-hsic-phy-mdm9615"
+			"qcom,usb-hsic-phy-msm8974"
+
+- #phy-cells:
+    Usage: required
+    Value type: <u32>
+    Definition: Should contain 0
+
+- clocks:
+    Usage: required
+    Value type: <prop-encoded-array>
+    Definition: Should contain clock specifier for phy, calibration and
+                a calibration sleep clock
+
+- clock-names:
+    Usage: required
+    Value type: <stringlist>
+    Definition: Should contain "phy, "cal" and "cal_sleep"
+
+- pinctrl-names:
+    Usage: required
+    Value type: <stringlist>
+    Definition: Should contain "init" and "default" in that order
+
+- pinctrl-0:
+    Usage: required
+    Value type: <prop-encoded-array>
+    Definition: List of pinctrl settings to apply to keep HSIC pins in a glitch
+                free state
+
+- pinctrl-1:
+    Usage: required
+    Value type: <prop-encoded-array>
+    Definition: List of pinctrl settings to apply to mux out the HSIC pins
+
+EXAMPLE
+
+usb-controller {
+	ulpi {
+		phy {
+			compatible = "qcom,usb-hsic-phy-msm8974",
+				     "qcom,usb-hsic-phy";
+			#phy-cells = <0>;
+			pinctrl-names = "init", "default";
+			pinctrl-0 = <&hsic_sleep>;
+			pinctrl-1 = <&hsic_default>;
+			clocks = <&gcc GCC_USB_HSIC_CLK>,
+				 <&gcc GCC_USB_HSIC_IO_CAL_CLK>,
+				 <&gcc GCC_USB_HSIC_IO_CAL_SLEEP_CLK>;
+			clock-names = "phy", "cal", "cal_sleep";
+			assigned-clocks = <&gcc GCC_USB_HSIC_IO_CAL_CLK>;
+			assigned-clock-rates = <960000>;
+		};
+	};
+};

Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt

@@ -10,6 +10,7 @@ Required properties:
   * allwinner,sun8i-a23-usb-phy
   * allwinner,sun8i-a33-usb-phy
   * allwinner,sun8i-h3-usb-phy
+  * allwinner,sun8i-v3s-usb-phy
   * allwinner,sun50i-a64-usb-phy
 - reg : a list of offset + length pairs
 - reg-names :

Documentation/devicetree/bindings/ufs/ufs-qcom.txt

@@ -29,7 +29,6 @@ Optional properties:
 - vdda-pll-max-microamp : specifies max. load that can be drawn from pll supply
 - vddp-ref-clk-supply   : phandle to UFS device ref_clk pad power supply
 - vddp-ref-clk-max-microamp : specifies max. load that can be drawn from this supply
-- vddp-ref-clk-always-on : specifies if this supply needs to be kept always on
 
 Example:
 

drivers/phy/Kconfig

@@ -363,6 +363,7 @@ config PHY_ROCKCHIP_INNO_USB2
 	tristate "Rockchip INNO USB2PHY Driver"
 	depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
 	depends on COMMON_CLK
+	depends on EXTCON
 	depends on USB_SUPPORT
 	select GENERIC_PHY
 	select USB_COMMON
@@ -437,6 +438,21 @@ config PHY_QCOM_UFS
 	help
 	  Support for UFS PHY on QCOM chipsets.
 
+config PHY_QCOM_USB_HS
+	tristate "Qualcomm USB HS PHY module"
+	depends on USB_ULPI_BUS
+	select GENERIC_PHY
+	help
+	  Support for the USB high-speed ULPI compliant phy on Qualcomm
+	  chipsets.
+
+config PHY_QCOM_USB_HSIC
+	tristate "Qualcomm USB HSIC ULPI PHY module"
+	depends on USB_ULPI_BUS
+	select GENERIC_PHY
+	help
+	  Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
+
 config PHY_TUSB1210
 	tristate "TI TUSB1210 ULPI PHY module"
 	depends on USB_ULPI_BUS
@@ -486,4 +502,12 @@ config PHY_MESON8B_USB2
 	  and GXBB SoCs.
 	  If unsure, say N.
 
+config PHY_NSP_USB3
+	tristate "Broadcom NorthStar plus USB3 PHY driver"
+	depends on OF && (ARCH_BCM_NSP || COMPILE_TEST)
+	select GENERIC_PHY
+	default ARCH_BCM_NSP
+	help
+	  Enable this to support the Broadcom Northstar plus USB3 PHY.
+	  If unsure, say N.
 endmenu

drivers/phy/Makefile

@@ -52,6 +52,8 @@ obj-$(CONFIG_PHY_STIH407_USB)		+= phy-stih407-usb.o
 obj-$(CONFIG_PHY_QCOM_UFS) 	+= phy-qcom-ufs.o
 obj-$(CONFIG_PHY_QCOM_UFS) 	+= phy-qcom-ufs-qmp-20nm.o
 obj-$(CONFIG_PHY_QCOM_UFS) 	+= phy-qcom-ufs-qmp-14nm.o
+obj-$(CONFIG_PHY_QCOM_USB_HS) 		+= phy-qcom-usb-hs.o
+obj-$(CONFIG_PHY_QCOM_USB_HSIC) 	+= phy-qcom-usb-hsic.o
 obj-$(CONFIG_PHY_TUSB1210)		+= phy-tusb1210.o
 obj-$(CONFIG_PHY_BRCM_SATA)		+= phy-brcm-sata.o
 obj-$(CONFIG_PHY_PISTACHIO_USB)		+= phy-pistachio-usb.o
@@ -59,3 +61,4 @@ obj-$(CONFIG_PHY_CYGNUS_PCIE)		+= phy-bcm-cygnus-pcie.o
 obj-$(CONFIG_ARCH_TEGRA) += tegra/
 obj-$(CONFIG_PHY_NS2_PCIE)		+= phy-bcm-ns2-pcie.o
 obj-$(CONFIG_PHY_MESON8B_USB2)		+= phy-meson8b-usb2.o
+obj-$(CONFIG_PHY_NSP_USB3)		+= phy-bcm-nsp-usb3.o

drivers/phy/phy-bcm-cygnus-pcie.c

@@ -114,7 +114,7 @@ static int cygnus_pcie_phy_power_off(struct phy *p)
 	return cygnus_pcie_power_config(phy, false);
 }
 
-static struct phy_ops cygnus_pcie_phy_ops = {
+static const struct phy_ops cygnus_pcie_phy_ops = {
 	.power_on = cygnus_pcie_phy_power_on,
 	.power_off = cygnus_pcie_phy_power_off,
 	.owner = THIS_MODULE,

drivers/phy/phy-bcm-nsp-usb3.c

+/*
+ * Copyright (C) 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mdio.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+
+#define NSP_USB3_RST_CTRL_OFFSET	0x3f8
+
+/* mdio reg access */
+#define NSP_USB3_PHY_BASE_ADDR_REG	0x1f
+
+#define NSP_USB3_PHY_PLL30_BLOCK	0x8000
+#define NSP_USB3_PLL_CONTROL		0x01
+#define NSP_USB3_PLLA_CONTROL0		0x0a
+#define NSP_USB3_PLLA_CONTROL1		0x0b
+
+#define NSP_USB3_PHY_TX_PMD_BLOCK	0x8040
+#define NSP_USB3_TX_PMD_CONTROL1	0x01
+
+#define NSP_USB3_PHY_PIPE_BLOCK		0x8060
+#define NSP_USB3_LFPS_CMP		0x02
+#define NSP_USB3_LFPS_DEGLITCH		0x03
+
+struct nsp_usb3_phy {
+	struct regmap *usb3_ctrl;
+	struct phy *phy;
+	struct mdio_device *mdiodev;
+};
+
+static int nsp_usb3_phy_init(struct phy *phy)
+{
+	struct nsp_usb3_phy *iphy = phy_get_drvdata(phy);
+	struct mii_bus *bus = iphy->mdiodev->bus;
+	int addr = iphy->mdiodev->addr;
+	u32 data;
+	int rc;
+
+	rc = regmap_read(iphy->usb3_ctrl, 0, &data);
+	if (rc)
+		return rc;
+	data |= 1;
+	rc = regmap_write(iphy->usb3_ctrl, 0, data);
+	if (rc)
+		return rc;
+
+	rc = regmap_write(iphy->usb3_ctrl, NSP_USB3_RST_CTRL_OFFSET, 1);
+	if (rc)
+		return rc;
+
+	rc = mdiobus_write(bus, addr, NSP_USB3_PHY_BASE_ADDR_REG,
+			   NSP_USB3_PHY_PLL30_BLOCK);
+	if (rc)
+		return rc;
+
+	rc = mdiobus_write(bus, addr, NSP_USB3_PLL_CONTROL, 0x1000);
+	if (rc)
+		return rc;
+
+	rc = mdiobus_write(bus, addr, NSP_USB3_PLLA_CONTROL0, 0x6400);
+	if (rc)
+		return rc;
+
+	rc = mdiobus_write(bus, addr, NSP_USB3_PLLA_CONTROL1, 0xc000);
+	if (rc)
+		return rc;
+
+	rc = mdiobus_write(bus, addr, NSP_USB3_PLLA_CONTROL1, 0x8000);
+	if (rc)
+		return rc;
+
+	rc = regmap_write(iphy->usb3_ctrl, NSP_USB3_RST_CTRL_OFFSET, 0);
+	if (rc)
+		return rc;
+
+	rc = mdiobus_write(bus, addr, NSP_USB3_PLL_CONTROL, 0x9000);
+	if (rc)
+		return rc;
+
+	rc = mdiobus_write(bus, addr, NSP_USB3_PHY_BASE_ADDR_REG,
+			   NSP_USB3_PHY_PIPE_BLOCK);
+	if (rc)
+		return rc;
+
+	rc = mdiobus_write(bus, addr, NSP_USB3_LFPS_CMP, 0xf30d);
+	if (rc)
+		return rc;
+
+	rc = mdiobus_write(bus, addr, NSP_USB3_LFPS_DEGLITCH, 0x6302);
+	if (rc)
+		return rc;
+
+	rc = mdiobus_write(bus, addr, NSP_USB3_PHY_BASE_ADDR_REG,
+			   NSP_USB3_PHY_TX_PMD_BLOCK);
+	if (rc)
+		return rc;
+
+	rc = mdiobus_write(bus, addr, NSP_USB3_TX_PMD_CONTROL1, 0x1003);
+
+	return rc;
+}
+
+static struct phy_ops nsp_usb3_phy_ops = {
+	.init	= nsp_usb3_phy_init,
+	.owner	= THIS_MODULE,
+};
+
+static int nsp_usb3_phy_probe(struct mdio_device *mdiodev)
+{
+	struct device *dev = &mdiodev->dev;
+	struct phy_provider *provider;
+	struct nsp_usb3_phy *iphy;
+
+	iphy = devm_kzalloc(dev, sizeof(*iphy), GFP_KERNEL);
+	if (!iphy)
+		return -ENOMEM;
+	iphy->mdiodev = mdiodev;
+
+	iphy->usb3_ctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
+						 "usb3-ctrl-syscon");
+	if (IS_ERR(iphy->usb3_ctrl))
+		return PTR_ERR(iphy->usb3_ctrl);
+
+	iphy->phy = devm_phy_create(dev, dev->of_node, &nsp_usb3_phy_ops);
+	if (IS_ERR(iphy->phy)) {
+		dev_err(dev, "failed to create PHY\n");
+		return PTR_ERR(iphy->phy);
+	}
+
+	phy_set_drvdata(iphy->phy, iphy);
+
+	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(provider)) {
+		dev_err(dev, "could not register PHY provider\n");
+		return PTR_ERR(provider);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id nsp_usb3_phy_of_match[] = {
+	{.compatible = "brcm,nsp-usb3-phy",},
+	{ /* sentinel */ }
+};
+
+static struct mdio_driver nsp_usb3_phy_driver = {
+	.mdiodrv = {
+		.driver = {
+			.name = "nsp-usb3-phy",
+			.of_match_table = nsp_usb3_phy_of_match,
+		},
+	},
+	.probe = nsp_usb3_phy_probe,
+};
+
+mdio_module_driver(nsp_usb3_phy_driver);
+
+MODULE_DESCRIPTION("Broadcom NSP USB3 PHY driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com");

drivers/phy/phy-hi6220-usb.c

@@ -112,7 +112,7 @@ static int hi6220_phy_exit(struct phy *phy)
 	return hi6220_phy_setup(priv, false);
 }
 
-static struct phy_ops hi6220_phy_ops = {
+static const struct phy_ops hi6220_phy_ops = {
 	.init		= hi6220_phy_start,
 	.exit		= hi6220_phy_exit,
 	.owner		= THIS_MODULE,

drivers/phy/phy-mt65xx-usb3.c

@@ -506,7 +506,7 @@ static struct phy *mt65xx_phy_xlate(struct device *dev,
 	return instance->phy;
 }
 
-static struct phy_ops mt65xx_u3phy_ops = {
+static const struct phy_ops mt65xx_u3phy_ops = {
 	.init		= mt65xx_phy_init,
 	.exit		= mt65xx_phy_exit,
 	.power_on	= mt65xx_phy_power_on,

drivers/phy/phy-qcom-ufs-i.h

@@ -77,7 +77,6 @@ struct ufs_qcom_phy_vreg {
 	int min_uV;
 	int max_uV;
 	bool enabled;
-	bool is_always_on;
 };
 
 struct ufs_qcom_phy {

drivers/phy/phy-qcom-ufs-qmp-14nm.c

@@ -132,27 +132,18 @@ static int ufs_qcom_phy_qmp_14nm_probe(struct platform_device *pdev)
 				&ufs_qcom_phy_qmp_14nm_phy_ops, &phy_14nm_ops);
 
 	if (!generic_phy) {
-		dev_err(dev, "%s: ufs_qcom_phy_generic_probe() failed\n",
-			__func__);
 		err = -EIO;
 		goto out;
 	}
 
 	err = ufs_qcom_phy_init_clks(phy_common);
-	if (err) {
-		dev_err(phy_common->dev,
-			"%s: ufs_qcom_phy_init_clks() failed %d\n",
-			__func__, err);
+	if (err)
 		goto out;
-	}
 
 	err = ufs_qcom_phy_init_vregulators(phy_common);
-	if (err) {
-		dev_err(phy_common->dev,
-			"%s: ufs_qcom_phy_init_vregulators() failed %d\n",
-			__func__, err);
+	if (err)
 		goto out;
-	}
+
 	phy_common->vdda_phy.max_uV = UFS_PHY_VDDA_PHY_UV;
 	phy_common->vdda_phy.min_uV = UFS_PHY_VDDA_PHY_UV;
 

drivers/phy/phy-qcom-ufs-qmp-20nm.c

@@ -190,25 +190,17 @@ static int ufs_qcom_phy_qmp_20nm_probe(struct platform_device *pdev)
 				&ufs_qcom_phy_qmp_20nm_phy_ops, &phy_20nm_ops);
 
 	if (!generic_phy) {
-		dev_err(dev, "%s: ufs_qcom_phy_generic_probe() failed\n",
-			__func__);
 		err = -EIO;
 		goto out;
 	}
 
 	err = ufs_qcom_phy_init_clks(phy_common);
-	if (err) {
-		dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_clks() failed %d\n",
-			__func__, err);
+	if (err)
 		goto out;
-	}
 
 	err = ufs_qcom_phy_init_vregulators(phy_common);
-	if (err) {
-		dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_vregulators() failed %d\n",
-			__func__, err);
+	if (err)
 		goto out;
-	}
 
 	ufs_qcom_phy_qmp_20nm_advertise_quirks(phy_common);
 

drivers/phy/phy-qcom-ufs.c

@@ -189,12 +189,12 @@ int ufs_qcom_phy_init_clks(struct ufs_qcom_phy *phy_common)
 	if (err)
 		goto out;
 
+skip_txrx_clk:
 	err = ufs_qcom_phy_clk_get(phy_common->dev, "ref_clk_src",
 				   &phy_common->ref_clk_src);
 	if (err)
 		goto out;
 
-skip_txrx_clk:
 	/*
 	 * "ref_clk_parent" is optional hence don't abort init if it's not
 	 * found.
@@ -210,25 +210,19 @@ int ufs_qcom_phy_init_clks(struct ufs_qcom_phy *phy_common)
 }
 EXPORT_SYMBOL_GPL(ufs_qcom_phy_init_clks);
 
-static int __ufs_qcom_phy_init_vreg(struct device *dev,
-		struct ufs_qcom_phy_vreg *vreg, const char *name, bool optional)
+static int ufs_qcom_phy_init_vreg(struct device *dev,
+				  struct ufs_qcom_phy_vreg *vreg,
+				  const char *name)
 {
 	int err = 0;
 
 	char prop_name[MAX_PROP_NAME];
 
-	vreg->name = devm_kstrdup(dev, name, GFP_KERNEL);
-	if (!vreg->name) {
-		err = -ENOMEM;
-		goto out;
-	}
-
+	vreg->name = name;
 	vreg->reg = devm_regulator_get(dev, name);
 	if (IS_ERR(vreg->reg)) {
 		err = PTR_ERR(vreg->reg);
-		vreg->reg = NULL;
-		if (!optional)
-			dev_err(dev, "failed to get %s, %d\n", name, err);
+		dev_err(dev, "failed to get %s, %d\n", name, err);
 		goto out;
 	}
 
@@ -248,9 +242,6 @@ static int __ufs_qcom_phy_init_vreg(struct device *dev,
 			}
 			err = 0;
 		}
-		snprintf(prop_name, MAX_PROP_NAME, "%s-always-on", name);
-		vreg->is_always_on = of_property_read_bool(dev->of_node,
-							   prop_name);
 	}
 
 	if (!strcmp(name, "vdda-pll")) {
@@ -265,17 +256,9 @@ static int __ufs_qcom_phy_init_vreg(struct device *dev,
 	}
 
 out:
-	if (err)
-		kfree(vreg->name);
 	return err;
 }
 
-static int ufs_qcom_phy_init_vreg(struct device *dev,
-			struct ufs_qcom_phy_vreg *vreg, const char *name)
-{
-	return __ufs_qcom_phy_init_vreg(dev, vreg, name, false);
-}
-
 int ufs_qcom_phy_init_vregulators(struct ufs_qcom_phy *phy_common)
 {
 	int err;
@@ -291,9 +274,9 @@ int ufs_qcom_phy_init_vregulators(struct ufs_qcom_phy *phy_common)
 	if (err)
 		goto out;
 
-	/* vddp-ref-clk-* properties are optional */
-	__ufs_qcom_phy_init_vreg(phy_common->dev, &phy_common->vddp_ref_clk,
-				 "vddp-ref-clk", true);
+	err = ufs_qcom_phy_init_vreg(phy_common->dev, &phy_common->vddp_ref_clk,
+				     "vddp-ref-clk");
+
 out:
 	return err;
 }
@@ -416,7 +399,7 @@ static int ufs_qcom_phy_disable_vreg(struct device *dev,
 {
 	int ret = 0;
 
-	if (!vreg || !vreg->enabled || vreg->is_always_on)
+	if (!vreg || !vreg->enabled)
 		goto out;
 
 	ret = regulator_disable(vreg->reg);

drivers/phy/phy-qcom-usb-hs.c

+/**
+ * Copyright (C) 2016 Linaro Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/ulpi/driver.h>
+#include <linux/ulpi/regs.h>
+#include <linux/clk.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of_device.h>
+#include <linux/reset.h>
+#include <linux/extcon.h>
+#include <linux/notifier.h>
+
+#include "ulpi_phy.h"
+
+#define ULPI_PWR_CLK_MNG_REG		0x88
+# define ULPI_PWR_OTG_COMP_DISABLE	BIT(0)
+
+#define ULPI_MISC_A			0x96
+# define ULPI_MISC_A_VBUSVLDEXTSEL	BIT(1)
+# define ULPI_MISC_A_VBUSVLDEXT		BIT(0)
+
+
+struct ulpi_seq {
+	u8 addr;
+	u8 val;
+};
+
+struct qcom_usb_hs_phy {
+	struct ulpi *ulpi;
+	struct phy *phy;
+	struct clk *ref_clk;
+	struct clk *sleep_clk;
+	struct regulator *v1p8;
+	struct regulator *v3p3;
+	struct reset_control *reset;
+	struct ulpi_seq *init_seq;
+	struct extcon_dev *vbus_edev;
+	struct notifier_block vbus_notify;
+};
+
+static int qcom_usb_hs_phy_set_mode(struct phy *phy, enum phy_mode mode)
+{
+	struct qcom_usb_hs_phy *uphy = phy_get_drvdata(phy);
+	u8 addr;
+	int ret;
+
+	if (!uphy->vbus_edev) {
+		u8 val = 0;
+
+		switch (mode) {
+		case PHY_MODE_USB_OTG:
+		case PHY_MODE_USB_HOST:
+			val |= ULPI_INT_IDGRD;
+		case PHY_MODE_USB_DEVICE:
+			val |= ULPI_INT_SESS_VALID;
+		default:
+			break;
+		}
+
+		ret = ulpi_write(uphy->ulpi, ULPI_USB_INT_EN_RISE, val);
+		if (ret)
+			return ret;
+		ret = ulpi_write(uphy->ulpi, ULPI_USB_INT_EN_FALL, val);
+	} else {
+		switch (mode) {
+		case PHY_MODE_USB_OTG:
+		case PHY_MODE_USB_DEVICE:
+			addr = ULPI_SET(ULPI_MISC_A);
+			break;
+		case PHY_MODE_USB_HOST:
+			addr = ULPI_CLR(ULPI_MISC_A);
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		ret = ulpi_write(uphy->ulpi, ULPI_SET(ULPI_PWR_CLK_MNG_REG),
+				 ULPI_PWR_OTG_COMP_DISABLE);
+		if (ret)
+			return ret;
+		ret = ulpi_write(uphy->ulpi, addr, ULPI_MISC_A_VBUSVLDEXTSEL);
+	}
+
+	return ret;
+}
+
+static int
+qcom_usb_hs_phy_vbus_notifier(struct notifier_block *nb, unsigned long event,
+			      void *ptr)
+{
+	struct qcom_usb_hs_phy *uphy;
+	u8 addr;
+
+	uphy = container_of(nb, struct qcom_usb_hs_phy, vbus_notify);
+
+	if (event)
+		addr = ULPI_SET(ULPI_MISC_A);
+	else
+		addr = ULPI_CLR(ULPI_MISC_A);
+
+	return ulpi_write(uphy->ulpi, addr, ULPI_MISC_A_VBUSVLDEXT);
+}
+
+static int qcom_usb_hs_phy_power_on(struct phy *phy)
+{
+	struct qcom_usb_hs_phy *uphy = phy_get_drvdata(phy);
+	struct ulpi *ulpi = uphy->ulpi;
+	const struct ulpi_seq *seq;
+	int ret, state;
+
+	ret = clk_prepare_enable(uphy->ref_clk);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(uphy->sleep_clk);
+	if (ret)
+		goto err_sleep;
+
+	ret = regulator_set_load(uphy->v1p8, 50000);
+	if (ret < 0)
+		goto err_1p8;
+
+	ret = regulator_enable(uphy->v1p8);
+	if (ret)
+		goto err_1p8;
+
+	ret = regulator_set_voltage_triplet(uphy->v3p3, 3050000, 3300000,
+					    3300000);
+	if (ret)
+		goto err_3p3;
+
+	ret = regulator_set_load(uphy->v3p3, 50000);
+	if (ret < 0)
+		goto err_3p3;
+
+	ret = regulator_enable(uphy->v3p3);
+	if (ret)
+		goto err_3p3;
+
+	for (seq = uphy->init_seq; seq->addr; seq++) {
+		ret = ulpi_write(ulpi, ULPI_EXT_VENDOR_SPECIFIC + seq->addr,
+				 seq->val);
+		if (ret)
+			goto err_ulpi;
+	}
+
+	if (uphy->reset) {
+		ret = reset_control_reset(uphy->reset);
+		if (ret)
+			goto err_ulpi;
+	}
+
+	if (uphy->vbus_edev) {
+		state = extcon_get_cable_state_(uphy->vbus_edev, EXTCON_USB);
+		/* setup initial state */
+		qcom_usb_hs_phy_vbus_notifier(&uphy->vbus_notify, state,
+					      uphy->vbus_edev);
+		ret = extcon_register_notifier(uphy->vbus_edev, EXTCON_USB,
+				&uphy->vbus_notify);
+		if (ret)
+			goto err_ulpi;
+	}
+
+	return 0;
+err_ulpi:
+	regulator_disable(uphy->v3p3);
+err_3p3:
+	regulator_disable(uphy->v1p8);
+err_1p8:
+	clk_disable_unprepare(uphy->sleep_clk);
+err_sleep:
+	clk_disable_unprepare(uphy->ref_clk);
+	return ret;
+}
+
+static int qcom_usb_hs_phy_power_off(struct phy *phy)
+{
+	int ret;
+	struct qcom_usb_hs_phy *uphy = phy_get_drvdata(phy);
+
+	if (uphy->vbus_edev) {
+		ret = extcon_unregister_notifier(uphy->vbus_edev, EXTCON_USB,
+						 &uphy->vbus_notify);
+		if (ret)
+			return ret;
+	}
+
+	regulator_disable(uphy->v3p3);
+	regulator_disable(uphy->v1p8);
+	clk_disable_unprepare(uphy->sleep_clk);
+	clk_disable_unprepare(uphy->ref_clk);
+
+	return 0;
+}
+
+static const struct phy_ops qcom_usb_hs_phy_ops = {
+	.power_on = qcom_usb_hs_phy_power_on,
+	.power_off = qcom_usb_hs_phy_power_off,
+	.set_mode = qcom_usb_hs_phy_set_mode,
+	.owner = THIS_MODULE,
+};
+
+static int qcom_usb_hs_phy_probe(struct ulpi *ulpi)
+{
+	struct qcom_usb_hs_phy *uphy;
+	struct phy_provider *p;
+	struct clk *clk;
+	struct regulator *reg;
+	struct reset_control *reset;
+	int size;
+	int ret;
+
+	uphy = devm_kzalloc(&ulpi->dev, sizeof(*uphy), GFP_KERNEL);
+	if (!uphy)
+		return -ENOMEM;
+	ulpi_set_drvdata(ulpi, uphy);
+	uphy->ulpi = ulpi;
+
+	size = of_property_count_u8_elems(ulpi->dev.of_node, "qcom,init-seq");
+	if (size < 0)
+		size = 0;
+	uphy->init_seq = devm_kmalloc_array(&ulpi->dev, (size / 2) + 1,
+					   sizeof(*uphy->init_seq), GFP_KERNEL);
+	if (!uphy->init_seq)
+		return -ENOMEM;
+	ret = of_property_read_u8_array(ulpi->dev.of_node, "qcom,init-seq",
+					(u8 *)uphy->init_seq, size);
+	if (ret && size)
+		return ret;
+	/* NUL terminate */
+	uphy->init_seq[size / 2].addr = uphy->init_seq[size / 2].val = 0;
+
+	uphy->ref_clk = clk = devm_clk_get(&ulpi->dev, "ref");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	uphy->sleep_clk = clk = devm_clk_get(&ulpi->dev, "sleep");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	uphy->v1p8 = reg = devm_regulator_get(&ulpi->dev, "v1p8");
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
+
+	uphy->v3p3 = reg = devm_regulator_get(&ulpi->dev, "v3p3");
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
+
+	uphy->reset = reset = devm_reset_control_get(&ulpi->dev, "por");
+	if (IS_ERR(reset)) {
+		if (PTR_ERR(reset) == -EPROBE_DEFER)
+			return PTR_ERR(reset);
+		uphy->reset = NULL;
+	}
+
+	uphy->phy = devm_phy_create(&ulpi->dev, ulpi->dev.of_node,
+				    &qcom_usb_hs_phy_ops);
+	if (IS_ERR(uphy->phy))
+		return PTR_ERR(uphy->phy);
+
+	uphy->vbus_edev = extcon_get_edev_by_phandle(&ulpi->dev, 0);
+	if (IS_ERR(uphy->vbus_edev)) {
+		if (PTR_ERR(uphy->vbus_edev) != -ENODEV)
+			return PTR_ERR(uphy->vbus_edev);
+		uphy->vbus_edev = NULL;
+	}
+
+	uphy->vbus_notify.notifier_call = qcom_usb_hs_phy_vbus_notifier;
+	phy_set_drvdata(uphy->phy, uphy);
+
+	p = devm_of_phy_provider_register(&ulpi->dev, of_phy_simple_xlate);
+	return PTR_ERR_OR_ZERO(p);
+}
+
+static const struct of_device_id qcom_usb_hs_phy_match[] = {
+	{ .compatible = "qcom,usb-hs-phy", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, qcom_usb_hs_phy_match);
+
+static struct ulpi_driver qcom_usb_hs_phy_driver = {
+	.probe = qcom_usb_hs_phy_probe,
+	.driver = {
+		.name = "qcom_usb_hs_phy",
+		.of_match_table = qcom_usb_hs_phy_match,
+	},
+};
+module_ulpi_driver(qcom_usb_hs_phy_driver);
+
+MODULE_DESCRIPTION("Qualcomm USB HS phy");
+MODULE_LICENSE("GPL v2");

drivers/phy/phy-qcom-usb-hsic.c

+/**
+ * Copyright (C) 2016 Linaro Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/ulpi/driver.h>
+#include <linux/ulpi/regs.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/pinctrl-state.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+
+#include "ulpi_phy.h"
+
+#define ULPI_HSIC_CFG		0x30
+#define ULPI_HSIC_IO_CAL	0x33
+
+struct qcom_usb_hsic_phy {
+	struct ulpi *ulpi;
+	struct phy *phy;
+	struct pinctrl *pctl;
+	struct clk *phy_clk;
+	struct clk *cal_clk;
+	struct clk *cal_sleep_clk;
+};
+
+static int qcom_usb_hsic_phy_power_on(struct phy *phy)
+{
+	struct qcom_usb_hsic_phy *uphy = phy_get_drvdata(phy);
+	struct ulpi *ulpi = uphy->ulpi;
+	struct pinctrl_state *pins_default;
+	int ret;
+
+	ret = clk_prepare_enable(uphy->phy_clk);
+	if (ret)
+		return ret;
+
+	ret = clk_prepare_enable(uphy->cal_clk);
+	if (ret)
+		goto err_cal;
+
+	ret = clk_prepare_enable(uphy->cal_sleep_clk);
+	if (ret)
+		goto err_sleep;
+
+	/* Set periodic calibration interval to ~2.048sec in HSIC_IO_CAL_REG */
+	ret = ulpi_write(ulpi, ULPI_HSIC_IO_CAL, 0xff);
+	if (ret)
+		goto err_ulpi;
+
+	/* Enable periodic IO calibration in HSIC_CFG register */
+	ret = ulpi_write(ulpi, ULPI_HSIC_CFG, 0xa8);
+	if (ret)
+		goto err_ulpi;
+
+	/* Configure pins for HSIC functionality */
+	pins_default = pinctrl_lookup_state(uphy->pctl, PINCTRL_STATE_DEFAULT);
+	if (IS_ERR(pins_default))
+		return PTR_ERR(pins_default);
+
+	ret = pinctrl_select_state(uphy->pctl, pins_default);
+	if (ret)
+		goto err_ulpi;
+
+	 /* Enable HSIC mode in HSIC_CFG register */
+	ret = ulpi_write(ulpi, ULPI_SET(ULPI_HSIC_CFG), 0x01);
+	if (ret)
+		goto err_ulpi;
+
+	/* Disable auto-resume */
+	ret = ulpi_write(ulpi, ULPI_CLR(ULPI_IFC_CTRL),
+			 ULPI_IFC_CTRL_AUTORESUME);
+	if (ret)
+		goto err_ulpi;
+
+	return ret;
+err_ulpi:
+	clk_disable_unprepare(uphy->cal_sleep_clk);
+err_sleep:
+	clk_disable_unprepare(uphy->cal_clk);
+err_cal:
+	clk_disable_unprepare(uphy->phy_clk);
+	return ret;
+}
+
+static int qcom_usb_hsic_phy_power_off(struct phy *phy)
+{
+	struct qcom_usb_hsic_phy *uphy = phy_get_drvdata(phy);
+
+	clk_disable_unprepare(uphy->cal_sleep_clk);
+	clk_disable_unprepare(uphy->cal_clk);
+	clk_disable_unprepare(uphy->phy_clk);
+
+	return 0;
+}
+
+static const struct phy_ops qcom_usb_hsic_phy_ops = {
+	.power_on = qcom_usb_hsic_phy_power_on,
+	.power_off = qcom_usb_hsic_phy_power_off,
+	.owner = THIS_MODULE,
+};
+
+static int qcom_usb_hsic_phy_probe(struct ulpi *ulpi)
+{
+	struct qcom_usb_hsic_phy *uphy;
+	struct phy_provider *p;
+	struct clk *clk;
+
+	uphy = devm_kzalloc(&ulpi->dev, sizeof(*uphy), GFP_KERNEL);
+	if (!uphy)
+		return -ENOMEM;
+	ulpi_set_drvdata(ulpi, uphy);
+
+	uphy->ulpi = ulpi;
+	uphy->pctl = devm_pinctrl_get(&ulpi->dev);
+	if (IS_ERR(uphy->pctl))
+		return PTR_ERR(uphy->pctl);
+
+	uphy->phy_clk = clk = devm_clk_get(&ulpi->dev, "phy");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	uphy->cal_clk = clk = devm_clk_get(&ulpi->dev, "cal");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	uphy->cal_sleep_clk = clk = devm_clk_get(&ulpi->dev, "cal_sleep");
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	uphy->phy = devm_phy_create(&ulpi->dev, ulpi->dev.of_node,
+				    &qcom_usb_hsic_phy_ops);
+	if (IS_ERR(uphy->phy))
+		return PTR_ERR(uphy->phy);
+	phy_set_drvdata(uphy->phy, uphy);
+
+	p = devm_of_phy_provider_register(&ulpi->dev, of_phy_simple_xlate);
+	return PTR_ERR_OR_ZERO(p);
+}
+
+static const struct of_device_id qcom_usb_hsic_phy_match[] = {
+	{ .compatible = "qcom,usb-hsic-phy", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, qcom_usb_hsic_phy_match);
+
+static struct ulpi_driver qcom_usb_hsic_phy_driver = {
+	.probe = qcom_usb_hsic_phy_probe,
+	.driver = {
+		.name = "qcom_usb_hsic_phy",
+		.of_match_table = qcom_usb_hsic_phy_match,
+	},
+};
+module_ulpi_driver(qcom_usb_hsic_phy_driver);
+
+MODULE_DESCRIPTION("Qualcomm USB HSIC phy");
+MODULE_LICENSE("GPL v2");

drivers/phy/phy-rcar-gen3-usb2.c

@@ -94,11 +94,11 @@ static void rcar_gen3_phy_usb2_work(struct work_struct *work)
 						 work);
 
 	if (ch->extcon_host) {
-		extcon_set_cable_state_(ch->extcon, EXTCON_USB_HOST, true);
-		extcon_set_cable_state_(ch->extcon, EXTCON_USB, false);
+		extcon_set_state_sync(ch->extcon, EXTCON_USB_HOST, true);
+		extcon_set_state_sync(ch->extcon, EXTCON_USB, false);
 	} else {
-		extcon_set_cable_state_(ch->extcon, EXTCON_USB_HOST, false);
-		extcon_set_cable_state_(ch->extcon, EXTCON_USB, true);
+		extcon_set_state_sync(ch->extcon, EXTCON_USB_HOST, false);
+		extcon_set_state_sync(ch->extcon, EXTCON_USB, true);
 	}
 }
 
@@ -350,7 +350,7 @@ static int rcar_gen3_phy_usb2_power_off(struct phy *p)
 	return ret;
 }
 
-static struct phy_ops rcar_gen3_phy_usb2_ops = {
+static const struct phy_ops rcar_gen3_phy_usb2_ops = {
 	.init		= rcar_gen3_phy_usb2_init,
 	.exit		= rcar_gen3_phy_usb2_exit,
 	.power_on	= rcar_gen3_phy_usb2_power_on,

drivers/phy/phy-rockchip-inno-usb2.c

@@ -595,9 +595,14 @@ static void rockchip_usb2phy_otg_sm_work(struct work_struct *work)
 		if (rport->vbus_attached != vbus_attach) {
 			rport->vbus_attached = vbus_attach;
 
-			if (notify_charger && rphy->edev)
+			if (notify_charger && rphy->edev) {
 				extcon_set_cable_state_(rphy->edev,
 							cable, vbus_attach);
+				if (cable == EXTCON_CHG_USB_SDP)
+					extcon_set_state_sync(rphy->edev,
+							      EXTCON_USB,
+							      vbus_attach);
+			}
 		}
 		break;
 	case OTG_STATE_B_PERIPHERAL:

drivers/phy/phy-sun4i-usb.c

@@ -99,6 +99,7 @@ enum sun4i_usb_phy_type {
 	sun6i_a31_phy,
 	sun8i_a33_phy,
 	sun8i_h3_phy,
+	sun8i_v3s_phy,
 	sun50i_a64_phy,
 };
 
@@ -188,7 +189,8 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,
 	spin_lock_irqsave(&phy_data->reg_lock, flags);
 
 	if (phy_data->cfg->type == sun8i_a33_phy ||
-	    phy_data->cfg->type == sun50i_a64_phy) {
+	    phy_data->cfg->type == sun50i_a64_phy ||
+	    phy_data->cfg->type == sun8i_v3s_phy) {
 		/* A33 or A64 needs us to set phyctl to 0 explicitly */
 		writel(0, phyctl);
 	}
@@ -534,7 +536,7 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
 	mutex_unlock(&phy0->mutex);
 
 	if (id_notify) {
-		extcon_set_cable_state_(data->extcon, EXTCON_USB_HOST,
+		extcon_set_state_sync(data->extcon, EXTCON_USB_HOST,
 					!id_det);
 		/* When leaving host mode force end the session here */
 		if (force_session_end && id_det == 1) {
@@ -547,7 +549,7 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
 	}
 
 	if (vbus_notify)
-		extcon_set_cable_state_(data->extcon, EXTCON_USB, vbus_det);
+		extcon_set_state_sync(data->extcon, EXTCON_USB, vbus_det);
 
 	if (sun4i_usb_phy0_poll(data))
 		queue_delayed_work(system_wq, &data->detect, POLL_TIME);
@@ -825,6 +827,15 @@ static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
 	.enable_pmu_unk1 = true,
 };
 
+static const struct sun4i_usb_phy_cfg sun8i_v3s_cfg = {
+	.num_phys = 1,
+	.type = sun8i_v3s_phy,
+	.disc_thresh = 3,
+	.phyctl_offset = REG_PHYCTL_A33,
+	.dedicated_clocks = true,
+	.enable_pmu_unk1 = true,
+};
+
 static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = {
 	.num_phys = 2,
 	.type = sun50i_a64_phy,
@@ -842,6 +853,7 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
 	{ .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg },
 	{ .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg },
 	{ .compatible = "allwinner,sun8i-h3-usb-phy", .data = &sun8i_h3_cfg },
+	{ .compatible = "allwinner,sun8i-v3s-usb-phy", .data = &sun8i_v3s_cfg },
 	{ .compatible = "allwinner,sun50i-a64-usb-phy",
 	  .data = &sun50i_a64_cfg},
 	{ },