trivial: fix typos in comments s/DGBU/DBGU/

DBGU means Debug Unit, was refered as "DGBU" in some files. Fixed to "DBGU".
Signed-off-by: NSamuel R. C. Vale <srcvale@holoscopio.com>
Acked-by: NAndrew Victor <linux@maxim.org.za>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

arch/arm/mach-at91/board-afeb-9260v1.c

@@ -53,7 +53,7 @@ static void __init afeb9260_map_io(void)
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */

arch/arm/mach-at91/board-cam60.c

@@ -50,7 +50,7 @@ static void __init cam60_map_io(void)
 	/* Initialize processor: 10 MHz crystal */
 	at91sam9260_initialize(10000000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* set serial console to ttyS0 (ie, DBGU) */

arch/arm/mach-at91/board-neocore926.c

@@ -56,7 +56,7 @@ static void __init neocore926_map_io(void)
 	/* Initialize processor: 20 MHz crystal */
 	at91sam9263_initialize(20000000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */

arch/arm/mach-at91/board-qil-a9260.c

@@ -53,7 +53,7 @@ static void __init ek_map_io(void)
 	/* Initialize processor: 12.000 MHz crystal */
 	at91sam9260_initialize(12000000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */

arch/arm/mach-at91/board-sam9260ek.c

@@ -54,7 +54,7 @@ static void __init ek_map_io(void)
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */

arch/arm/mach-at91/board-sam9261ek.c

@@ -61,7 +61,7 @@ static void __init ek_map_io(void)
 	/* Setup the LEDs */
 	at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* set serial console to ttyS0 (ie, DBGU) */

arch/arm/mach-at91/board-sam9263ek.c

@@ -57,7 +57,7 @@ static void __init ek_map_io(void)
 	/* Initialize processor: 16.367 MHz crystal */
 	at91sam9263_initialize(16367660);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */

arch/arm/mach-at91/board-sam9g20ek.c

@@ -50,7 +50,7 @@ static void __init ek_map_io(void)
 	/* Initialize processor: 18.432 MHz crystal */
 	at91sam9260_initialize(18432000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */

arch/arm/mach-at91/board-sam9rlek.c

@@ -43,7 +43,7 @@ static void __init ek_map_io(void)
 	/* Initialize processor: 12.000 MHz crystal */
 	at91sam9rl_initialize(12000000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */

arch/arm/mach-at91/board-usb-a9260.c

@@ -53,7 +53,7 @@ static void __init ek_map_io(void)
 	/* Initialize processor: 12.000 MHz crystal */
 	at91sam9260_initialize(12000000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* set serial console to ttyS0 (ie, DBGU) */

arch/arm/mach-at91/board-usb-a9263.c

@@ -52,7 +52,7 @@ static void __init ek_map_io(void)
 	/* Initialize processor: 12.00 MHz crystal */
 	at91sam9263_initialize(12000000);
 
-	/* DGBU on ttyS0. (Rx & Tx only) */
+	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 
 	/* set serial console to ttyS0 (ie, DBGU) */