提交 4f3446bb 编写于 作者: D Daniel Borkmann 提交者: David S. Miller

bpf: add generic constant blinding for use in jits

This work adds a generic facility for use from eBPF JIT compilers
that allows for further hardening of JIT generated images through
blinding constants. In response to the original work on BPF JIT
spraying published by Keegan McAllister [1], most BPF JITs were
changed to make images read-only and start at a randomized offset
in the page, where the rest was filled with trap instructions. We
have this nowadays in x86, arm, arm64 and s390 JIT compilers.
Additionally, later work also made eBPF interpreter images read
only for kernels supporting DEBUG_SET_MODULE_RONX, that is, x86,
arm, arm64 and s390 archs as well currently. This is done by
default for mentioned JITs when JITing is enabled. Furthermore,
we had a generic and configurable constant blinding facility on our
todo for quite some time now to further make spraying harder, and
first implementation since around netconf 2016.

We found that for systems where untrusted users can load cBPF/eBPF
code where JIT is enabled, start offset randomization helps a bit
to make jumps into crafted payload harder, but in case where larger
programs that cross page boundary are injected, we again have some
part of the program opcodes at a page start offset. With improved
guessing and more reliable payload injection, chances can increase
to jump into such payload. Elena Reshetova recently wrote a test
case for it [2, 3]. Moreover, eBPF comes with 64 bit constants, which
can leave some more room for payloads. Note that for all this,
additional bugs in the kernel are still required to make the jump
(and of course to guess right, to not jump into a trap) and naturally
the JIT must be enabled, which is disabled by default.

For helping mitigation, the general idea is to provide an option
bpf_jit_harden that admins can tweak along with bpf_jit_enable, so
that for cases where JIT should be enabled for performance reasons,
the generated image can be further hardened with blinding constants
for unpriviledged users (bpf_jit_harden == 1), with trading off
performance for these, but not for privileged ones. We also added
the option of blinding for all users (bpf_jit_harden == 2), which
is quite helpful for testing f.e. with test_bpf.ko. There are no
further e.g. hardening levels of bpf_jit_harden switch intended,
rationale is to have it dead simple to use as on/off. Since this
functionality would need to be duplicated over and over for JIT
compilers to use, which are already complex enough, we provide a
generic eBPF byte-code level based blinding implementation, which is
then just transparently JITed. JIT compilers need to make only a few
changes to integrate this facility and can be migrated one by one.

This option is for eBPF JITs and will be used in x86, arm64, s390
without too much effort, and soon ppc64 JITs, thus that native eBPF
can be blinded as well as cBPF to eBPF migrations, so that both can
be covered with a single implementation. The rule for JITs is that
bpf_jit_blind_constants() must be called from bpf_int_jit_compile(),
and in case blinding is disabled, we follow normally with JITing the
passed program. In case blinding is enabled and we fail during the
process of blinding itself, we must return with the interpreter.
Similarly, in case the JITing process after the blinding failed, we
return normally to the interpreter with the non-blinded code. Meaning,
interpreter doesn't change in any way and operates on eBPF code as
usual. For doing this pre-JIT blinding step, we need to make use of
a helper/auxiliary register, here BPF_REG_AX. This is strictly internal
to the JIT and not in any way part of the eBPF architecture. Just like
in the same way as JITs internally make use of some helper registers
when emitting code, only that here the helper register is one
abstraction level higher in eBPF bytecode, but nevertheless in JIT
phase. That helper register is needed since f.e. manually written
program can issue loads to all registers of eBPF architecture.

The core concept with the additional register is: blind out all 32
and 64 bit constants by converting BPF_K based instructions into a
small sequence from K_VAL into ((RND ^ K_VAL) ^ RND). Therefore, this
is transformed into: BPF_REG_AX := (RND ^ K_VAL), BPF_REG_AX ^= RND,
and REG <OP> BPF_REG_AX, so actual operation on the target register
is translated from BPF_K into BPF_X one that is operating on
BPF_REG_AX's content. During rewriting phase when blinding, RND is
newly generated via prandom_u32() for each processed instruction.
64 bit loads are split into two 32 bit loads to make translation and
patching not too complex. Only basic thing required by JITs is to
call the helper bpf_jit_blind_constants()/bpf_jit_prog_release_other()
pair, and to map BPF_REG_AX into an unused register.

Small bpf_jit_disasm extract from [2] when applied to x86 JIT:

echo 0 > /proc/sys/net/core/bpf_jit_harden

  ffffffffa034f5e9 + <x>:
  [...]
  39:   mov    $0xa8909090,%eax
  3e:   mov    $0xa8909090,%eax
  43:   mov    $0xa8ff3148,%eax
  48:   mov    $0xa89081b4,%eax
  4d:   mov    $0xa8900bb0,%eax
  52:   mov    $0xa810e0c1,%eax
  57:   mov    $0xa8908eb4,%eax
  5c:   mov    $0xa89020b0,%eax
  [...]

echo 1 > /proc/sys/net/core/bpf_jit_harden

  ffffffffa034f1e5 + <x>:
  [...]
  39:   mov    $0xe1192563,%r10d
  3f:   xor    $0x4989b5f3,%r10d
  46:   mov    %r10d,%eax
  49:   mov    $0xb8296d93,%r10d
  4f:   xor    $0x10b9fd03,%r10d
  56:   mov    %r10d,%eax
  59:   mov    $0x8c381146,%r10d
  5f:   xor    $0x24c7200e,%r10d
  66:   mov    %r10d,%eax
  69:   mov    $0xeb2a830e,%r10d
  6f:   xor    $0x43ba02ba,%r10d
  76:   mov    %r10d,%eax
  79:   mov    $0xd9730af,%r10d
  7f:   xor    $0xa5073b1f,%r10d
  86:   mov    %r10d,%eax
  89:   mov    $0x9a45662b,%r10d
  8f:   xor    $0x325586ea,%r10d
  96:   mov    %r10d,%eax
  [...]

As can be seen, original constants that carry payload are hidden
when enabled, actual operations are transformed from constant-based
to register-based ones, making jumps into constants ineffective.
Above extract/example uses single BPF load instruction over and
over, but of course all instructions with constants are blinded.

Performance wise, JIT with blinding performs a bit slower than just
JIT and faster than interpreter case. This is expected, since we
still get all the performance benefits from JITing and in normal
use-cases not every single instruction needs to be blinded. Summing
up all 296 test cases averaged over multiple runs from test_bpf.ko
suite, interpreter was 55% slower than JIT only and JIT with blinding
was 8% slower than JIT only. Since there are also some extremes in
the test suite, I expect for ordinary workloads that the performance
for the JIT with blinding case is even closer to JIT only case,
f.e. nmap test case from suite has averaged timings in ns 29 (JIT),
35 (+ blinding), and 151 (interpreter).

BPF test suite, seccomp test suite, eBPF sample code and various
bigger networking eBPF programs have been tested with this and were
running fine. For testing purposes, I also adapted interpreter and
redirected blinded eBPF image to interpreter and also here all tests
pass.

  [1] http://mainisusuallyafunction.blogspot.com/2012/11/attacking-hardened-linux-systems-with.html
  [2] https://github.com/01org/jit-spray-poc-for-ksp/
  [3] http://www.openwall.com/lists/kernel-hardening/2016/05/03/5Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: NElena Reshetova <elena.reshetova@intel.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 d1c55ab5
......@@ -43,6 +43,17 @@ Values :
1 - enable the JIT
2 - enable the JIT and ask the compiler to emit traces on kernel log.
bpf_jit_harden
--------------
This enables hardening for the Berkeley Packet Filter Just in Time compiler.
Supported are eBPF JIT backends. Enabling hardening trades off performance,
but can mitigate JIT spraying.
Values :
0 - disable JIT hardening (default value)
1 - enable JIT hardening for unprivileged users only
2 - enable JIT hardening for all users
dev_weight
--------------
......
......@@ -13,6 +13,8 @@
#include <linux/printk.h>
#include <linux/workqueue.h>
#include <linux/sched.h>
#include <linux/capability.h>
#include <net/sch_generic.h>
#include <asm/cacheflush.h>
......@@ -42,6 +44,15 @@ struct bpf_prog_aux;
#define BPF_REG_X BPF_REG_7
#define BPF_REG_TMP BPF_REG_8
/* Kernel hidden auxiliary/helper register for hardening step.
* Only used by eBPF JITs. It's nothing more than a temporary
* register that JITs use internally, only that here it's part
* of eBPF instructions that have been rewritten for blinding
* constants. See JIT pre-step in bpf_jit_blind_constants().
*/
#define BPF_REG_AX MAX_BPF_REG
#define MAX_BPF_JIT_REG (MAX_BPF_REG + 1)
/* BPF program can access up to 512 bytes of stack space. */
#define MAX_BPF_STACK 512
......@@ -501,6 +512,7 @@ struct bpf_prog *bpf_patch_insn_single(struct bpf_prog *prog, u32 off,
#ifdef CONFIG_BPF_JIT
extern int bpf_jit_enable;
extern int bpf_jit_harden;
typedef void (*bpf_jit_fill_hole_t)(void *area, unsigned int size);
......@@ -513,6 +525,9 @@ void bpf_jit_binary_free(struct bpf_binary_header *hdr);
void bpf_jit_compile(struct bpf_prog *fp);
void bpf_jit_free(struct bpf_prog *fp);
struct bpf_prog *bpf_jit_blind_constants(struct bpf_prog *fp);
void bpf_jit_prog_release_other(struct bpf_prog *fp, struct bpf_prog *fp_other);
static inline void bpf_jit_dump(unsigned int flen, unsigned int proglen,
u32 pass, void *image)
{
......@@ -523,6 +538,33 @@ static inline void bpf_jit_dump(unsigned int flen, unsigned int proglen,
print_hex_dump(KERN_ERR, "JIT code: ", DUMP_PREFIX_OFFSET,
16, 1, image, proglen, false);
}
static inline bool bpf_jit_is_ebpf(void)
{
# ifdef CONFIG_HAVE_EBPF_JIT
return true;
# else
return false;
# endif
}
static inline bool bpf_jit_blinding_enabled(void)
{
/* These are the prerequisites, should someone ever have the
* idea to call blinding outside of them, we make sure to
* bail out.
*/
if (!bpf_jit_is_ebpf())
return false;
if (!bpf_jit_enable)
return false;
if (!bpf_jit_harden)
return false;
if (bpf_jit_harden == 1 && capable(CAP_SYS_ADMIN))
return false;
return true;
}
#else
static inline void bpf_jit_compile(struct bpf_prog *fp)
{
......
......@@ -243,6 +243,209 @@ void bpf_jit_binary_free(struct bpf_binary_header *hdr)
{
module_memfree(hdr);
}
int bpf_jit_harden __read_mostly;
static int bpf_jit_blind_insn(const struct bpf_insn *from,
const struct bpf_insn *aux,
struct bpf_insn *to_buff)
{
struct bpf_insn *to = to_buff;
u32 imm_rnd = prandom_u32();
s16 off;
BUILD_BUG_ON(BPF_REG_AX + 1 != MAX_BPF_JIT_REG);
BUILD_BUG_ON(MAX_BPF_REG + 1 != MAX_BPF_JIT_REG);
if (from->imm == 0 &&
(from->code == (BPF_ALU | BPF_MOV | BPF_K) ||
from->code == (BPF_ALU64 | BPF_MOV | BPF_K))) {
*to++ = BPF_ALU64_REG(BPF_XOR, from->dst_reg, from->dst_reg);
goto out;
}
switch (from->code) {
case BPF_ALU | BPF_ADD | BPF_K:
case BPF_ALU | BPF_SUB | BPF_K:
case BPF_ALU | BPF_AND | BPF_K:
case BPF_ALU | BPF_OR | BPF_K:
case BPF_ALU | BPF_XOR | BPF_K:
case BPF_ALU | BPF_MUL | BPF_K:
case BPF_ALU | BPF_MOV | BPF_K:
case BPF_ALU | BPF_DIV | BPF_K:
case BPF_ALU | BPF_MOD | BPF_K:
*to++ = BPF_ALU32_IMM(BPF_MOV, BPF_REG_AX, imm_rnd ^ from->imm);
*to++ = BPF_ALU32_IMM(BPF_XOR, BPF_REG_AX, imm_rnd);
*to++ = BPF_ALU32_REG(from->code, from->dst_reg, BPF_REG_AX);
break;
case BPF_ALU64 | BPF_ADD | BPF_K:
case BPF_ALU64 | BPF_SUB | BPF_K:
case BPF_ALU64 | BPF_AND | BPF_K:
case BPF_ALU64 | BPF_OR | BPF_K:
case BPF_ALU64 | BPF_XOR | BPF_K:
case BPF_ALU64 | BPF_MUL | BPF_K:
case BPF_ALU64 | BPF_MOV | BPF_K:
case BPF_ALU64 | BPF_DIV | BPF_K:
case BPF_ALU64 | BPF_MOD | BPF_K:
*to++ = BPF_ALU64_IMM(BPF_MOV, BPF_REG_AX, imm_rnd ^ from->imm);
*to++ = BPF_ALU64_IMM(BPF_XOR, BPF_REG_AX, imm_rnd);
*to++ = BPF_ALU64_REG(from->code, from->dst_reg, BPF_REG_AX);
break;
case BPF_JMP | BPF_JEQ | BPF_K:
case BPF_JMP | BPF_JNE | BPF_K:
case BPF_JMP | BPF_JGT | BPF_K:
case BPF_JMP | BPF_JGE | BPF_K:
case BPF_JMP | BPF_JSGT | BPF_K:
case BPF_JMP | BPF_JSGE | BPF_K:
case BPF_JMP | BPF_JSET | BPF_K:
/* Accommodate for extra offset in case of a backjump. */
off = from->off;
if (off < 0)
off -= 2;
*to++ = BPF_ALU64_IMM(BPF_MOV, BPF_REG_AX, imm_rnd ^ from->imm);
*to++ = BPF_ALU64_IMM(BPF_XOR, BPF_REG_AX, imm_rnd);
*to++ = BPF_JMP_REG(from->code, from->dst_reg, BPF_REG_AX, off);
break;
case BPF_LD | BPF_ABS | BPF_W:
case BPF_LD | BPF_ABS | BPF_H:
case BPF_LD | BPF_ABS | BPF_B:
*to++ = BPF_ALU64_IMM(BPF_MOV, BPF_REG_AX, imm_rnd ^ from->imm);
*to++ = BPF_ALU64_IMM(BPF_XOR, BPF_REG_AX, imm_rnd);
*to++ = BPF_LD_IND(from->code, BPF_REG_AX, 0);
break;
case BPF_LD | BPF_IND | BPF_W:
case BPF_LD | BPF_IND | BPF_H:
case BPF_LD | BPF_IND | BPF_B:
*to++ = BPF_ALU64_IMM(BPF_MOV, BPF_REG_AX, imm_rnd ^ from->imm);
*to++ = BPF_ALU64_IMM(BPF_XOR, BPF_REG_AX, imm_rnd);
*to++ = BPF_ALU32_REG(BPF_ADD, BPF_REG_AX, from->src_reg);
*to++ = BPF_LD_IND(from->code, BPF_REG_AX, 0);
break;
case BPF_LD | BPF_IMM | BPF_DW:
*to++ = BPF_ALU64_IMM(BPF_MOV, BPF_REG_AX, imm_rnd ^ aux[1].imm);
*to++ = BPF_ALU64_IMM(BPF_XOR, BPF_REG_AX, imm_rnd);
*to++ = BPF_ALU64_IMM(BPF_LSH, BPF_REG_AX, 32);
*to++ = BPF_ALU64_REG(BPF_MOV, aux[0].dst_reg, BPF_REG_AX);
break;
case 0: /* Part 2 of BPF_LD | BPF_IMM | BPF_DW. */
*to++ = BPF_ALU32_IMM(BPF_MOV, BPF_REG_AX, imm_rnd ^ aux[0].imm);
*to++ = BPF_ALU32_IMM(BPF_XOR, BPF_REG_AX, imm_rnd);
*to++ = BPF_ALU64_REG(BPF_OR, aux[0].dst_reg, BPF_REG_AX);
break;
case BPF_ST | BPF_MEM | BPF_DW:
case BPF_ST | BPF_MEM | BPF_W:
case BPF_ST | BPF_MEM | BPF_H:
case BPF_ST | BPF_MEM | BPF_B:
*to++ = BPF_ALU64_IMM(BPF_MOV, BPF_REG_AX, imm_rnd ^ from->imm);
*to++ = BPF_ALU64_IMM(BPF_XOR, BPF_REG_AX, imm_rnd);
*to++ = BPF_STX_MEM(from->code, from->dst_reg, BPF_REG_AX, from->off);
break;
}
out:
return to - to_buff;
}
static struct bpf_prog *bpf_prog_clone_create(struct bpf_prog *fp_other,
gfp_t gfp_extra_flags)
{
gfp_t gfp_flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO |
gfp_extra_flags;
struct bpf_prog *fp;
fp = __vmalloc(fp_other->pages * PAGE_SIZE, gfp_flags, PAGE_KERNEL);
if (fp != NULL) {
kmemcheck_annotate_bitfield(fp, meta);
/* aux->prog still points to the fp_other one, so
* when promoting the clone to the real program,
* this still needs to be adapted.
*/
memcpy(fp, fp_other, fp_other->pages * PAGE_SIZE);
}
return fp;
}
static void bpf_prog_clone_free(struct bpf_prog *fp)
{
/* aux was stolen by the other clone, so we cannot free
* it from this path! It will be freed eventually by the
* other program on release.
*
* At this point, we don't need a deferred release since
* clone is guaranteed to not be locked.
*/
fp->aux = NULL;
__bpf_prog_free(fp);
}
void bpf_jit_prog_release_other(struct bpf_prog *fp, struct bpf_prog *fp_other)
{
/* We have to repoint aux->prog to self, as we don't
* know whether fp here is the clone or the original.
*/
fp->aux->prog = fp;
bpf_prog_clone_free(fp_other);
}
struct bpf_prog *bpf_jit_blind_constants(struct bpf_prog *prog)
{
struct bpf_insn insn_buff[16], aux[2];
struct bpf_prog *clone, *tmp;
int insn_delta, insn_cnt;
struct bpf_insn *insn;
int i, rewritten;
if (!bpf_jit_blinding_enabled())
return prog;
clone = bpf_prog_clone_create(prog, GFP_USER);
if (!clone)
return ERR_PTR(-ENOMEM);
insn_cnt = clone->len;
insn = clone->insnsi;
for (i = 0; i < insn_cnt; i++, insn++) {
/* We temporarily need to hold the original ld64 insn
* so that we can still access the first part in the
* second blinding run.
*/
if (insn[0].code == (BPF_LD | BPF_IMM | BPF_DW) &&
insn[1].code == 0)
memcpy(aux, insn, sizeof(aux));
rewritten = bpf_jit_blind_insn(insn, aux, insn_buff);
if (!rewritten)
continue;
tmp = bpf_patch_insn_single(clone, i, insn_buff, rewritten);
if (!tmp) {
/* Patching may have repointed aux->prog during
* realloc from the original one, so we need to
* fix it up here on error.
*/
bpf_jit_prog_release_other(prog, clone);
return ERR_PTR(-ENOMEM);
}
clone = tmp;
insn_delta = rewritten - 1;
/* Walk new program and skip insns we just inserted. */
insn = clone->insnsi + i + insn_delta;
insn_cnt += insn_delta;
i += insn_delta;
}
return clone;
}
#endif /* CONFIG_BPF_JIT */
/* Base function for offset calculation. Needs to go into .text section,
......
......@@ -295,8 +295,11 @@ config BPF_JIT
Berkeley Packet Filter filtering capabilities are normally handled
by an interpreter. This option allows kernel to generate a native
code when filter is loaded in memory. This should speedup
packet sniffing (libpcap/tcpdump). Note : Admin should enable
this feature changing /proc/sys/net/core/bpf_jit_enable
packet sniffing (libpcap/tcpdump).
Note, admin should enable this feature changing:
/proc/sys/net/core/bpf_jit_enable
/proc/sys/net/core/bpf_jit_harden (optional)
config NET_FLOW_LIMIT
bool
......
......@@ -294,6 +294,15 @@ static struct ctl_table net_core_table[] = {
.mode = 0644,
.proc_handler = proc_dointvec
},
# ifdef CONFIG_HAVE_EBPF_JIT
{
.procname = "bpf_jit_harden",
.data = &bpf_jit_harden,
.maxlen = sizeof(int),
.mode = 0600,
.proc_handler = proc_dointvec,
},
# endif
#endif
{
.procname = "netdev_tstamp_prequeue",
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册