media: atomisp: Use proper APIs to find I²C client device by ACPI HID

There are specific ACPI and I\xB2C APIs to match device by different
parameters, such as ACPI HID, and retrieve an I\xB2C client.
Use them instead of home grown approach.

Note, it fixes a resource leak as well.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+huawei@kernel.org>

drivers/staging/media/atomisp/pci/atomisp_gmin_platform.c

@@ -96,9 +96,9 @@ struct gmin_subdev {
 static struct gmin_subdev gmin_subdevs[MAX_SUBDEVS];
 
 /* ACPI HIDs for the PMICs that could be used by this driver */
-#define PMIC_ACPI_AXP		"INT33F4:00"	/* XPower AXP288 PMIC */
-#define PMIC_ACPI_TI		"INT33F5:00"	/* Dollar Cove TI PMIC */
-#define PMIC_ACPI_CRYSTALCOVE	"INT33FD:00"	/* Crystal Cove PMIC */
+#define PMIC_ACPI_AXP		"INT33F4"	/* XPower AXP288 PMIC */
+#define PMIC_ACPI_TI		"INT33F5"	/* Dollar Cove TI PMIC */
+#define PMIC_ACPI_CRYSTALCOVE	"INT33FD"	/* Crystal Cove PMIC */
 
 #define PMIC_PLATFORM_TI	"intel_soc_pmic_chtdc_ti"
 
@@ -371,34 +371,27 @@ static const guid_t atomisp_dsm_guid = GUID_INIT(0xdc2f6c4f, 0x045b, 0x4f1d,
 #define GMIN_PMC_CLK_NAME 14 /* "pmc_plt_clk_[0..5]" */
 static char gmin_pmc_clk_name[GMIN_PMC_CLK_NAME];
 
-static int gmin_i2c_match_one(struct device *dev, const void *data)
-{
-	const char *name = data;
-	struct i2c_client *client;
-
-	if (dev->type != &i2c_client_type)
-		return 0;
-
-	client = to_i2c_client(dev);
-
-	return (!strcmp(name, client->name));
-}
-
 static struct i2c_client *gmin_i2c_dev_exists(struct device *dev, char *name,
 					      struct i2c_client **client)
 {
+	struct acpi_device *adev;
 	struct device *d;
 
-	while ((d = bus_find_device(&i2c_bus_type, NULL, name,
-				    gmin_i2c_match_one))) {
-		*client = to_i2c_client(d);
-		dev_dbg(dev, "found '%s' at address 0x%02x, adapter %d\n",
-			(*client)->name, (*client)->addr,
-			(*client)->adapter->nr);
-		return *client;
-	}
+	adev = acpi_dev_get_first_match_dev(name, NULL, -1);
+	if (!adev)
+		return NULL;
 
-	return NULL;
+	d = bus_find_device_by_acpi_dev(&i2c_bus_type, adev);
+	acpi_dev_put(adev);
+	if (!d)
+		return NULL;
+
+	*client = i2c_verify_client(d);
+	put_device(d);
+
+	dev_dbg(dev, "found '%s' at address 0x%02x, adapter %d\n",
+		(*client)->name, (*client)->addr, (*client)->adapter->nr);
+	return *client;
 }
 
 static int gmin_i2c_write(struct device *dev, u16 i2c_addr, u8 reg,