提交 4edad7f0 编写于 作者: K Krzysztof Helt 提交者: Linus Torvalds

fbdev: kconfig update

Update Kconfig for Permedia 2, Trident and 3Dfx frame buffer drivers.

[akpm@linux-foundation.org: fix Kconfig text]
Signed-off-by: NKrzysztof Helt <krzysztof.h1@wp.pl>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
上级 69e4a7c2
......@@ -254,16 +254,24 @@ config FB_PM2
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
This is the frame buffer device driver for the Permedia2 AGP frame
buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a
product page at
<http://www.ask.com.hk/product/Permedia%202/permedia2.htm>.
This is the frame buffer device driver for cards based on
the 3D Labs Permedia, Permedia 2 and Permedia 2V chips.
The driver was tested on the following cards:
Diamond FireGL 1000 PRO AGP
ELSA Gloria Synergy PCI
Appian Jeronimo PRO (both heads) PCI
3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI
Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
ASK Graphic Blaster Exxtreme AGP
To compile this driver as a module, choose M here: the
module will be called pm2fb.
config FB_PM2_FIFO_DISCONNECT
bool "enable FIFO disconnect feature"
depends on FB_PM2 && PCI
help
Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2).
Support the Permedia2 FIFO disconnect feature.
config FB_ARMCLCD
tristate "ARM PrimeCell PL110 support"
......@@ -1539,25 +1547,25 @@ config FB_KYRO
module will be called kyrofb.
config FB_3DFX
tristate "3Dfx Banshee/Voodoo3 display support"
tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support"
depends on FB && PCI
select FB_CFB_IMAGEBLIT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
help
This driver supports graphics boards with the 3Dfx Banshee/Voodoo3
chips. Say Y if you have such a graphics board.
This driver supports graphics boards with the 3Dfx Banshee,
Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
such a graphics board.
To compile this driver as a module, choose M here: the
module will be called tdfxfb.
config FB_3DFX_ACCEL
bool "3Dfx Banshee/Voodoo3 Acceleration functions (EXPERIMENTAL)"
bool "3Dfx Acceleration functions (EXPERIMENTAL)"
depends on FB_3DFX && EXPERIMENTAL
---help---
This will compile the 3Dfx Banshee/Voodoo3 frame buffer device
with acceleration functions.
This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
device driver with acceleration functions.
config FB_VOODOO1
tristate "3Dfx Voodoo Graphics (sst1) support"
......@@ -1622,17 +1630,16 @@ config FB_TRIDENT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
---help---
This driver is supposed to support graphics boards with the
Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops
This is the frame buffer device driver for Trident PCI/AGP chipsets.
Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D
and Blade XP.
There are also integrated versions of these chips called CyberXXXX,
CyberImage or CyberBlade. These chips are mostly found in laptops
but also on some motherboards. For more information, read
<file:Documentation/fb/tridentfb.txt>
Cyberblade/i1 support will be removed soon, use the cyblafb driver
instead.
Say Y if you have such a graphics board.
To compile this driver as a module, choose M here: the
module will be called tridentfb.
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册