Merge tag 'tty-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

I wrote:
  "Serial driver fixes for 4.19-rc7

   Here are 3 small serial driver fixes for 4.19-rc7
    - 2 sh-sci bugfixes for reported issues
    - a revert of the PM handling for the 8250_dw code

   All of these have been in linux-next with no reported issues."

* tag 'tty-4.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "serial: sh-sci: Allow for compressed SCIF address"
  Revert "serial: sh-sci: Remove SCIx_RZ_SCIFA_REGTYPE"
  Revert "serial: 8250_dw: Fix runtime PM handling"

drivers/tty/serial/8250/8250_dw.c

@@ -630,10 +630,6 @@ static int dw8250_probe(struct platform_device *pdev)
 	if (!data->skip_autocfg)
 		dw8250_setup_port(p);
 
-#ifdef CONFIG_PM
-	uart.capabilities |= UART_CAP_RPM;
-#endif
-
 	/* If we have a valid fifosize, try hooking up DMA */
 	if (p->fifosize) {
 		data->dma.rxconf.src_maxburst = p->fifosize / 4;

drivers/tty/serial/sh-sci.c

@@ -291,6 +291,33 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = {
 		.error_clear = SCIF_ERROR_CLEAR,
 	},
 
+	/*
+	 * The "SCIFA" that is in RZ/T and RZ/A2.
+	 * It looks like a normal SCIF with FIFO data, but with a
+	 * compressed address space. Also, the break out of interrupts
+	 * are different: ERI/BRI, RXI, TXI, TEI, DRI.
+	 */
+	[SCIx_RZ_SCIFA_REGTYPE] = {
+		.regs = {
+			[SCSMR]		= { 0x00, 16 },
+			[SCBRR]		= { 0x02,  8 },
+			[SCSCR]		= { 0x04, 16 },
+			[SCxTDR]	= { 0x06,  8 },
+			[SCxSR]		= { 0x08, 16 },
+			[SCxRDR]	= { 0x0A,  8 },
+			[SCFCR]		= { 0x0C, 16 },
+			[SCFDR]		= { 0x0E, 16 },
+			[SCSPTR]	= { 0x10, 16 },
+			[SCLSR]		= { 0x12, 16 },
+		},
+		.fifosize = 16,
+		.overrun_reg = SCLSR,
+		.overrun_mask = SCLSR_ORER,
+		.sampling_rate_mask = SCI_SR(32),
+		.error_mask = SCIF_DEFAULT_ERROR_MASK,
+		.error_clear = SCIF_ERROR_CLEAR,
+	},
+
 	/*
 	 * Common SH-3 SCIF definitions.
 	 */
@@ -319,15 +346,15 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = {
 	[SCIx_SH4_SCIF_REGTYPE] = {
 		.regs = {
 			[SCSMR]		= { 0x00, 16 },
-			[SCBRR]		= { 0x02,  8 },
-			[SCSCR]		= { 0x04, 16 },
-			[SCxTDR]	= { 0x06,  8 },
-			[SCxSR]		= { 0x08, 16 },
-			[SCxRDR]	= { 0x0a,  8 },
-			[SCFCR]		= { 0x0c, 16 },
-			[SCFDR]		= { 0x0e, 16 },
-			[SCSPTR]	= { 0x10, 16 },
-			[SCLSR]		= { 0x12, 16 },
+			[SCBRR]		= { 0x04,  8 },
+			[SCSCR]		= { 0x08, 16 },
+			[SCxTDR]	= { 0x0c,  8 },
+			[SCxSR]		= { 0x10, 16 },
+			[SCxRDR]	= { 0x14,  8 },
+			[SCFCR]		= { 0x18, 16 },
+			[SCFDR]		= { 0x1c, 16 },
+			[SCSPTR]	= { 0x20, 16 },
+			[SCLSR]		= { 0x24, 16 },
 		},
 		.fifosize = 16,
 		.overrun_reg = SCLSR,
@@ -2810,7 +2837,7 @@ static int sci_init_single(struct platform_device *dev,
 {
 	struct uart_port *port = &sci_port->port;
 	const struct resource *res;
-	unsigned int i, regtype;
+	unsigned int i;
 	int ret;
 
 	sci_port->cfg	= p;
@@ -2847,7 +2874,6 @@ static int sci_init_single(struct platform_device *dev,
 	if (unlikely(sci_port->params == NULL))
 		return -EINVAL;
 
-	regtype = sci_port->params - sci_port_params;
 	switch (p->type) {
 	case PORT_SCIFB:
 		sci_port->rx_trigger = 48;
@@ -2902,10 +2928,6 @@ static int sci_init_single(struct platform_device *dev,
 			port->regshift = 1;
 	}
 
-	if (regtype == SCIx_SH4_SCIF_REGTYPE)
-		if (sci_port->reg_size >= 0x20)
-			port->regshift = 1;
-
 	/*
 	 * The UART port needs an IRQ value, so we peg this to the RX IRQ
 	 * for the multi-IRQ ports, which is where we are primarily
@@ -3110,6 +3132,10 @@ static const struct of_device_id of_sci_match[] = {
 		.compatible = "renesas,scif-r7s72100",
 		.data = SCI_OF_DATA(PORT_SCIF, SCIx_SH2_SCIF_FIFODATA_REGTYPE),
 	},
+	{
+		.compatible = "renesas,scif-r7s9210",
+		.data = SCI_OF_DATA(PORT_SCIF, SCIx_RZ_SCIFA_REGTYPE),
+	},
 	/* Family-specific types */
 	{
 		.compatible = "renesas,rcar-gen1-scif",

include/linux/serial_sci.h

@@ -36,6 +36,7 @@ enum {
 	SCIx_SH4_SCIF_FIFODATA_REGTYPE,
 	SCIx_SH7705_SCIF_REGTYPE,
 	SCIx_HSCIF_REGTYPE,
+	SCIx_RZ_SCIFA_REGTYPE,
 
 	SCIx_NR_REGTYPES,
 };