提交 4e48b1c5 编写于 作者: T Tony Prisk

arm: vt8500: gpio: Devicetree support for arch-vt8500

Converted the existing arch-vt8500 gpio to a platform_device.
Added support for WM8505 and WM8650 GPIO controllers.
Replaced existing readl/writel calls with _relaxed variants.
Replaced existing unsigned variables with u32 to match register size.
Signed-off-by: NTony Prisk <linux@prisktech.co.nz>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
上级 95e9fd10
......@@ -183,6 +183,12 @@ config GPIO_STA2X11
Say yes here to support the STA2x11/ConneXt GPIO device.
The GPIO module has 128 GPIO pins with alternate functions.
config GPIO_VT8500
bool "VIA/Wondermedia SoC GPIO Support"
depends on ARCH_VT8500
help
Say yes here to support the VT8500/WM8505/WM8650 GPIO controller.
config GPIO_XILINX
bool "Xilinx GPIO support"
depends on PPC_OF || MICROBLAZE
......
......@@ -69,6 +69,7 @@ obj-$(CONFIG_GPIO_TPS65912) += gpio-tps65912.o
obj-$(CONFIG_GPIO_TWL4030) += gpio-twl4030.o
obj-$(CONFIG_GPIO_UCB1400) += gpio-ucb1400.o
obj-$(CONFIG_GPIO_VR41XX) += gpio-vr41xx.o
obj-$(CONFIG_GPIO_VT8500) += gpio-vt8500.o
obj-$(CONFIG_GPIO_VX855) += gpio-vx855.o
obj-$(CONFIG_GPIO_WM831X) += gpio-wm831x.o
obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350.o
......
/* drivers/gpio/gpio-vt8500.c
*
* Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
* Based on arch/arm/mach-vt8500/gpio.c:
* - Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/module.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/bitops.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_device.h>
/*
We handle GPIOs by bank, each bank containing up to 32 GPIOs covered
by one set of registers (although not all may be valid).
Because different SoC's have different register offsets, we pass the
register offsets as data in vt8500_gpio_dt_ids[].
A value of NO_REG is used to indicate that this register is not
supported. Only used for ->en at the moment.
*/
#define NO_REG 0xFFFF
/*
* struct vt8500_gpio_bank_regoffsets
* @en: offset to enable register of the bank
* @dir: offset to direction register of the bank
* @data_out: offset to the data out register of the bank
* @data_in: offset to the data in register of the bank
* @ngpio: highest valid pin in this bank
*/
struct vt8500_gpio_bank_regoffsets {
unsigned int en;
unsigned int dir;
unsigned int data_out;
unsigned int data_in;
unsigned char ngpio;
};
struct vt8500_gpio_data {
unsigned int num_banks;
struct vt8500_gpio_bank_regoffsets banks[];
};
#define VT8500_BANK(__en, __dir, __out, __in, __ngpio) \
{ \
.en = __en, \
.dir = __dir, \
.data_out = __out, \
.data_in = __in, \
.ngpio = __ngpio, \
}
static struct vt8500_gpio_data vt8500_data = {
.num_banks = 7,
.banks = {
VT8500_BANK(0x00, 0x20, 0x40, 0x60, 26),
VT8500_BANK(0x04, 0x24, 0x44, 0x64, 28),
VT8500_BANK(0x08, 0x28, 0x48, 0x68, 31),
VT8500_BANK(0x0C, 0x2C, 0x4C, 0x6C, 19),
VT8500_BANK(0x10, 0x30, 0x50, 0x70, 19),
VT8500_BANK(0x14, 0x34, 0x54, 0x74, 23),
VT8500_BANK(NO_REG, 0x3C, 0x5C, 0x7C, 9),
},
};
static struct vt8500_gpio_data wm8505_data = {
.num_banks = 10,
.banks = {
VT8500_BANK(0x40, 0x68, 0x90, 0xB8, 8),
VT8500_BANK(0x44, 0x6C, 0x94, 0xBC, 32),
VT8500_BANK(0x48, 0x70, 0x98, 0xC0, 6),
VT8500_BANK(0x4C, 0x74, 0x9C, 0xC4, 16),
VT8500_BANK(0x50, 0x78, 0xA0, 0xC8, 25),
VT8500_BANK(0x54, 0x7C, 0xA4, 0xCC, 5),
VT8500_BANK(0x58, 0x80, 0xA8, 0xD0, 5),
VT8500_BANK(0x5C, 0x84, 0xAC, 0xD4, 12),
VT8500_BANK(0x60, 0x88, 0xB0, 0xD8, 16),
VT8500_BANK(0x64, 0x8C, 0xB4, 0xDC, 22),
},
};
/*
* No information about which bits are valid so we just make
* them all available until its figured out.
*/
static struct vt8500_gpio_data wm8650_data = {
.num_banks = 9,
.banks = {
VT8500_BANK(0x40, 0x80, 0xC0, 0x00, 32),
VT8500_BANK(0x44, 0x84, 0xC4, 0x04, 32),
VT8500_BANK(0x48, 0x88, 0xC8, 0x08, 32),
VT8500_BANK(0x4C, 0x8C, 0xCC, 0x0C, 32),
VT8500_BANK(0x50, 0x90, 0xD0, 0x10, 32),
VT8500_BANK(0x54, 0x94, 0xD4, 0x14, 32),
VT8500_BANK(0x58, 0x98, 0xD8, 0x18, 32),
VT8500_BANK(0x5C, 0x9C, 0xDC, 0x1C, 32),
VT8500_BANK(0x7C, 0xBC, 0xFC, 0x3C, 32),
},
};
struct vt8500_gpio_chip {
struct gpio_chip chip;
const struct vt8500_gpio_bank_regoffsets *regs;
void __iomem *base;
};
#define to_vt8500(__chip) container_of(__chip, struct vt8500_gpio_chip, chip)
static int vt8500_gpio_request(struct gpio_chip *chip, unsigned offset)
{
u32 val;
struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
if (vt8500_chip->regs->en == NO_REG)
return 0;
val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->en);
val |= BIT(offset);
writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->en);
return 0;
}
static void vt8500_gpio_free(struct gpio_chip *chip, unsigned offset)
{
struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
u32 val;
if (vt8500_chip->regs->en == NO_REG)
return;
val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->en);
val &= ~BIT(offset);
writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->en);
}
static int vt8500_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
u32 val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->dir);
val &= ~BIT(offset);
writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->dir);
return 0;
}
static int vt8500_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
int value)
{
struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
u32 val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->dir);
val |= BIT(offset);
writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->dir);
if (value) {
val = readl_relaxed(vt8500_chip->base +
vt8500_chip->regs->data_out);
val |= BIT(offset);
writel_relaxed(val, vt8500_chip->base +
vt8500_chip->regs->data_out);
}
return 0;
}
static int vt8500_gpio_get_value(struct gpio_chip *chip, unsigned offset)
{
struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
return (readl_relaxed(vt8500_chip->base + vt8500_chip->regs->data_in) >>
offset) & 1;
}
static void vt8500_gpio_set_value(struct gpio_chip *chip, unsigned offset,
int value)
{
struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
u32 val = readl_relaxed(vt8500_chip->base +
vt8500_chip->regs->data_out);
if (value)
val |= BIT(offset);
else
val &= ~BIT(offset);
writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->data_out);
}
static int vt8500_of_xlate(struct gpio_chip *gc,
const struct of_phandle_args *gpiospec, u32 *flags)
{
/* bank if specificed in gpiospec->args[0] */
if (flags)
*flags = gpiospec->args[2];
return gpiospec->args[1];
}
static int vt8500_add_chips(struct platform_device *pdev, void __iomem *base,
const struct vt8500_gpio_data *data)
{
struct vt8500_gpio_chip *vtchip;
struct gpio_chip *chip;
int i;
int pin_cnt = 0;
vtchip = devm_kzalloc(&pdev->dev,
sizeof(struct vt8500_gpio_chip) * data->num_banks,
GFP_KERNEL);
if (!vtchip) {
pr_err("%s: failed to allocate chip memory\n", __func__);
return -ENOMEM;
}
for (i = 0; i < data->num_banks; i++) {
vtchip[i].base = base;
vtchip[i].regs = &data->banks[i];
chip = &vtchip[i].chip;
chip->of_xlate = vt8500_of_xlate;
chip->of_gpio_n_cells = 3;
chip->of_node = pdev->dev.of_node;
chip->request = vt8500_gpio_request;
chip->free = vt8500_gpio_free;
chip->direction_input = vt8500_gpio_direction_input;
chip->direction_output = vt8500_gpio_direction_output;
chip->get = vt8500_gpio_get_value;
chip->set = vt8500_gpio_set_value;
chip->can_sleep = 0;
chip->base = pin_cnt;
chip->ngpio = data->banks[i].ngpio;
pin_cnt += data->banks[i].ngpio;
gpiochip_add(chip);
}
return 0;
}
static struct of_device_id vt8500_gpio_dt_ids[] = {
{ .compatible = "via,vt8500-gpio", .data = &vt8500_data, },
{ .compatible = "wm,wm8505-gpio", .data = &wm8505_data, },
{ .compatible = "wm,wm8650-gpio", .data = &wm8650_data, },
{ /* Sentinel */ },
};
static int __devinit vt8500_gpio_probe(struct platform_device *pdev)
{
void __iomem *gpio_base;
struct device_node *np;
const struct of_device_id *of_id =
of_match_device(vt8500_gpio_dt_ids, &pdev->dev);
if (!of_id) {
dev_err(&pdev->dev, "Failed to find gpio controller\n");
return -ENODEV;
}
np = pdev->dev.of_node;
if (!np) {
dev_err(&pdev->dev, "Missing GPIO description in devicetree\n");
return -EFAULT;
}
gpio_base = of_iomap(np, 0);
if (!gpio_base) {
dev_err(&pdev->dev, "Unable to map GPIO registers\n");
of_node_put(np);
return -ENOMEM;
}
vt8500_add_chips(pdev, gpio_base, of_id->data);
return 0;
}
static struct platform_driver vt8500_gpio_driver = {
.probe = vt8500_gpio_probe,
.driver = {
.name = "vt8500-gpio",
.owner = THIS_MODULE,
.of_match_table = vt8500_gpio_dt_ids,
},
};
module_platform_driver(vt8500_gpio_driver);
MODULE_DESCRIPTION("VT8500 GPIO Driver");
MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, vt8500_gpio_dt_ids);
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册