[SCSI] qla2xxx: fix regression on sparc64

Some sparc64 boxes don't have a valid NVRAM (from which the driver
takes its WWPN) try to extract this from open firmware instead and if
that fails, fall back to a default, which would be invalid if more
than one machine on the same SAN does this, since two machines with
the same WWPN would be illegal, so warn when taking this potentially
invalid default.

Tested on SunBlade-1000:
Acked-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

drivers/scsi/qla2xxx/qla_init.c

@@ -11,6 +11,11 @@
 
 #include "qla_devtbl.h"
 
+#ifdef CONFIG_SPARC
+#include <asm/prom.h>
+#include <asm/pbm.h>
+#endif
+
 /* XXX(hch): this is ugly, but we don't want to pull in exioctl.h */
 #ifndef EXT_IS_LUN_BIT_SET
 #define EXT_IS_LUN_BIT_SET(P,L) \
@@ -88,12 +93,7 @@ qla2x00_initialize_adapter(scsi_qla_host_t *ha)
 
 	qla_printk(KERN_INFO, ha, "Configure NVRAM parameters...\n");
 
-	rval = ha->isp_ops.nvram_config(ha);
-	if (rval) {
-		DEBUG2(printk("scsi(%ld): Unable to verify NVRAM data.\n",
-		    ha->host_no));
-		return rval;
-	}
+	ha->isp_ops.nvram_config(ha);
 
 	if (ha->flags.disable_serdes) {
 		/* Mask HBA via NVRAM settings? */
@@ -1393,6 +1393,28 @@ qla2x00_set_model_info(scsi_qla_host_t *ha, uint8_t *model, size_t len, char *de
 	}
 }
 
+/* On sparc systems, obtain port and node WWN from firmware
+ * properties.
+ */
+static void qla2xxx_nvram_wwn_from_ofw(scsi_qla_host_t *ha, nvram_t *nv)
+{
+#ifdef CONFIG_SPARC
+	struct pci_dev *pdev = ha->pdev;
+	struct pcidev_cookie *pcp = pdev->sysdata;
+	struct device_node *dp = pcp->prom_node;
+	u8 *val;
+	int len;
+
+	val = of_get_property(dp, "port-wwn", &len);
+	if (val && len >= WWN_SIZE)
+		memcpy(nv->port_name, val, WWN_SIZE);
+
+	val = of_get_property(dp, "node-wwn", &len);
+	if (val && len >= WWN_SIZE)
+		memcpy(nv->node_name, val, WWN_SIZE);
+#endif
+}
+
 /*
 * NVRAM configuration for ISP 2xxx
 *
@@ -1409,6 +1431,7 @@ qla2x00_set_model_info(scsi_qla_host_t *ha, uint8_t *model, size_t len, char *de
 int
 qla2x00_nvram_config(scsi_qla_host_t *ha)
 {
+	int             rval;
 	uint8_t         chksum = 0;
 	uint16_t        cnt;
 	uint8_t         *dptr1, *dptr2;
@@ -1417,6 +1440,8 @@ qla2x00_nvram_config(scsi_qla_host_t *ha)
 	uint8_t         *ptr = (uint8_t *)ha->request_ring;
 	struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
 
+	rval = QLA_SUCCESS;
+
 	/* Determine NVRAM starting address. */
 	ha->nvram_size = sizeof(nvram_t);
 	ha->nvram_base = 0;
@@ -1440,7 +1465,57 @@ qla2x00_nvram_config(scsi_qla_host_t *ha)
 		qla_printk(KERN_WARNING, ha, "Inconsistent NVRAM detected: "
 		    "checksum=0x%x id=%c version=0x%x.\n", chksum, nv->id[0],
 		    nv->nvram_version);
-		return QLA_FUNCTION_FAILED;
+		qla_printk(KERN_WARNING, ha, "Falling back to functioning (yet "
+		    "invalid -- WWPN) defaults.\n");
+
+		/*
+		 * Set default initialization control block.
+		 */
+		memset(nv, 0, ha->nvram_size);
+		nv->parameter_block_version = ICB_VERSION;
+
+		if (IS_QLA23XX(ha)) {
+			nv->firmware_options[0] = BIT_2 | BIT_1;
+			nv->firmware_options[1] = BIT_7 | BIT_5;
+			nv->add_firmware_options[0] = BIT_5;
+			nv->add_firmware_options[1] = BIT_5 | BIT_4;
+			nv->frame_payload_size = __constant_cpu_to_le16(2048);
+			nv->special_options[1] = BIT_7;
+		} else if (IS_QLA2200(ha)) {
+			nv->firmware_options[0] = BIT_2 | BIT_1;
+			nv->firmware_options[1] = BIT_7 | BIT_5;
+			nv->add_firmware_options[0] = BIT_5;
+			nv->add_firmware_options[1] = BIT_5 | BIT_4;
+			nv->frame_payload_size = __constant_cpu_to_le16(1024);
+		} else if (IS_QLA2100(ha)) {
+			nv->firmware_options[0] = BIT_3 | BIT_1;
+			nv->firmware_options[1] = BIT_5;
+			nv->frame_payload_size = __constant_cpu_to_le16(1024);
+		}
+
+		nv->max_iocb_allocation = __constant_cpu_to_le16(256);
+		nv->execution_throttle = __constant_cpu_to_le16(16);
+		nv->retry_count = 8;
+		nv->retry_delay = 1;
+
+		nv->port_name[0] = 33;
+		nv->port_name[3] = 224;
+		nv->port_name[4] = 139;
+
+		qla2xxx_nvram_wwn_from_ofw(ha, nv);
+
+		nv->login_timeout = 4;
+
+		/*
+		 * Set default host adapter parameters
+		 */
+		nv->host_p[1] = BIT_2;
+		nv->reset_delay = 5;
+		nv->port_down_retry_count = 8;
+		nv->max_luns_per_target = __constant_cpu_to_le16(8);
+		nv->link_down_timeout = 60;
+
+		rval = 1;
 	}
 
 #if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2)
@@ -1653,7 +1728,11 @@ qla2x00_nvram_config(scsi_qla_host_t *ha)
 		}
 	}
 
-	return QLA_SUCCESS;
+	if (rval) {
+		DEBUG2_3(printk(KERN_WARNING
+		    "scsi(%ld): NVRAM configuration failed!\n", ha->host_no));
+	}
+	return (rval);
 }
 
 static void
@@ -3071,9 +3150,7 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
 
 		ha->isp_ops.get_flash_version(ha, ha->request_ring);
 
-		rval = ha->isp_ops.nvram_config(ha);
-		if (rval)
-			goto isp_abort_retry;
+		ha->isp_ops.nvram_config(ha);
 
 		if (!qla2x00_restart_isp(ha)) {
 			clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
@@ -3103,7 +3180,6 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
 				}
 			}
 		} else {	/* failed the ISP abort */
-isp_abort_retry:
 			ha->flags.online = 1;
 			if (test_bit(ISP_ABORT_RETRY, &ha->dpc_flags)) {
 				if (ha->isp_abort_cnt == 0) {
@@ -3290,9 +3366,32 @@ qla24xx_reset_adapter(scsi_qla_host_t *ha)
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 }
 
+/* On sparc systems, obtain port and node WWN from firmware
+ * properties.
+ */
+static void qla24xx_nvram_wwn_from_ofw(scsi_qla_host_t *ha, struct nvram_24xx *nv)
+{
+#ifdef CONFIG_SPARC
+	struct pci_dev *pdev = ha->pdev;
+	struct pcidev_cookie *pcp = pdev->sysdata;
+	struct device_node *dp = pcp->prom_node;
+	u8 *val;
+	int len;
+
+	val = of_get_property(dp, "port-wwn", &len);
+	if (val && len >= WWN_SIZE)
+		memcpy(nv->port_name, val, WWN_SIZE);
+
+	val = of_get_property(dp, "node-wwn", &len);
+	if (val && len >= WWN_SIZE)
+		memcpy(nv->node_name, val, WWN_SIZE);
+#endif
+}
+
 int
 qla24xx_nvram_config(scsi_qla_host_t *ha)
 {
+	int   rval;
 	struct init_cb_24xx *icb;
 	struct nvram_24xx *nv;
 	uint32_t *dptr;
@@ -3300,6 +3399,7 @@ qla24xx_nvram_config(scsi_qla_host_t *ha)
 	uint32_t chksum;
 	uint16_t cnt;
 
+	rval = QLA_SUCCESS;
 	icb = (struct init_cb_24xx *)ha->init_cb;
 	nv = (struct nvram_24xx *)ha->request_ring;
 
@@ -3332,7 +3432,52 @@ qla24xx_nvram_config(scsi_qla_host_t *ha)
 		qla_printk(KERN_WARNING, ha, "Inconsistent NVRAM detected: "
 		    "checksum=0x%x id=%c version=0x%x.\n", chksum, nv->id[0],
 		    le16_to_cpu(nv->nvram_version));
-		return QLA_FUNCTION_FAILED;
+		qla_printk(KERN_WARNING, ha, "Falling back to functioning (yet "
+		    "invalid -- WWPN) defaults.\n");
+
+		/*
+		 * Set default initialization control block.
+		 */
+		memset(nv, 0, ha->nvram_size);
+		nv->nvram_version = __constant_cpu_to_le16(ICB_VERSION);
+		nv->version = __constant_cpu_to_le16(ICB_VERSION);
+		nv->frame_payload_size = __constant_cpu_to_le16(2048);
+		nv->execution_throttle = __constant_cpu_to_le16(0xFFFF);
+		nv->exchange_count = __constant_cpu_to_le16(0);
+		nv->hard_address = __constant_cpu_to_le16(124);
+		nv->port_name[0] = 0x21;
+		nv->port_name[1] = 0x00 + PCI_FUNC(ha->pdev->devfn);
+		nv->port_name[2] = 0x00;
+		nv->port_name[3] = 0xe0;
+		nv->port_name[4] = 0x8b;
+		nv->port_name[5] = 0x1c;
+		nv->port_name[6] = 0x55;
+		nv->port_name[7] = 0x86;
+		nv->node_name[0] = 0x20;
+		nv->node_name[1] = 0x00;
+		nv->node_name[2] = 0x00;
+		nv->node_name[3] = 0xe0;
+		nv->node_name[4] = 0x8b;
+		nv->node_name[5] = 0x1c;
+		nv->node_name[6] = 0x55;
+		nv->node_name[7] = 0x86;
+		qla24xx_nvram_wwn_from_ofw(ha, nv);
+		nv->login_retry_count = __constant_cpu_to_le16(8);
+		nv->interrupt_delay_timer = __constant_cpu_to_le16(0);
+		nv->login_timeout = __constant_cpu_to_le16(0);
+		nv->firmware_options_1 =
+		    __constant_cpu_to_le32(BIT_14|BIT_13|BIT_2|BIT_1);
+		nv->firmware_options_2 = __constant_cpu_to_le32(2 << 4);
+		nv->firmware_options_2 |= __constant_cpu_to_le32(BIT_12);
+		nv->firmware_options_3 = __constant_cpu_to_le32(2 << 13);
+		nv->host_p = __constant_cpu_to_le32(BIT_11|BIT_10);
+		nv->efi_parameters = __constant_cpu_to_le32(0);
+		nv->reset_delay = 5;
+		nv->max_luns_per_target = __constant_cpu_to_le16(128);
+		nv->port_down_retry_count = __constant_cpu_to_le16(30);
+		nv->link_down_timeout = __constant_cpu_to_le16(30);
+
+		rval = 1;
 	}
 
 	/* Reset Initialization control block */
@@ -3479,7 +3624,11 @@ qla24xx_nvram_config(scsi_qla_host_t *ha)
 		ha->flags.process_response_queue = 1;
 	}
 
-	return QLA_SUCCESS;
+	if (rval) {
+		DEBUG2_3(printk(KERN_WARNING
+		    "scsi(%ld): NVRAM configuration failed!\n", ha->host_no));
+	}
+	return (rval);
 }
 
 static int